Top Hand Drill Tools

Essential Rob Halford

  • ✅ [18+1 Position Clutch] - The 18 torque of the cordless drill allows for various screwing applications and an additional 1 torque for drilling wood/metal/plastic. Multi-position clutch provides precise control of drilling to prevent screws from sinking too deep, falling off screw heads or even breaking screw shafts..
  • ✅ [20 Voltage & 266 In-lbs Max Torque] - This 20V high voltage cordless drill driver will provide up to 266 In-lbs (30N.m Max) torque rotation strength to overcome resistance..
  • ✅ [2 Variable Speeds] - Featuring a 2-variable-speed switch (0-350 and 0-1350 RPM), combined with an adjustable clutch gives you the versatility to drill different materials and use a variety of bits. Low speed for screwing and high speed for drilling..
  • ✅ [Household Hand Tools & 14” Pink Storage Bag] - The home tool set comes with many hand tools including slip joint pliers, groove joint pliers, adjustable wrench, long nose pliers, magnetic screwdriver holder, screwdriver bits, utility knife, tape measure, etc. The 14" Pink women's tool bag is great for home improvement and DIY projects..
  • ✅ [3/8” Keyless Chuck] - The 3/8" keyless chuck allows the cordless drill to use a variety of bits for common tasks around the house. With the Forward/Reverse switch y....
Check Stock

jar-owl Daily Household Tool Set with Drill, 21V Cordless Drill Drive Set with 112pcs Combo Hand Tool Kit for Mens Home Repair

  • 【21V CORDLESS DRILL】Includes 21V Lithium drill for a variety of home projects, The 18+1 speed adjustable 21V cordless hammer drill can drill into wood,metal,plastic,etc. Max drilling capacity is 22mm(7/8"") for wood, 10mm(3/8"") for steel. 2-Gear-option with max torque 350 in-lbs for high (0-1350rpm) or low (0-350rpm) speed drilling/driving speeds..
  • 【EFFICIENT BATTERY】The powerful cordless screw drill driver has one 1.3Amh battery for easy operation. Powered by 1.3 Lithium Ion and charger. The charger runs at standard US 110/120 volt. It just takes you 60-min to be full charged which save up to 50% time than others and its cycle life is more than 250 time. This battery provides power for up to 8Nm of forward..
  • 【3/8" KEYLESS CHUCK&VARIABLE TRIGGER】The electric drill has 10mm 3/8" keyless ratcheting chuck can hold the bits without falling off and stop working, make them good for general purpose drilling. Variable speed trigger allow you to select different speeds on the task at hand. A flexible shaft could be used in some places where driver bits are hard to reach. Cordless tool is perfect for home, household, garage, car trunk, mechanic projects and bike repair..
  • 【MULTI-FUNCTIONAL TOOL KIT】This professional home power tool drill set ....
Check Stock

Battle Drill Combat Street Self-Defense DVD 4-DISC SET -- Military Combatives Training Series (Beginner To Advanced).

  • PINK RIBBON - WORKPRO Tools is donating $0.25 from this pink tool set purchase to National Breast Cancer Foundation, INC. NBCF is helping people by providing support to those affected by breast cancer.
  • MORE PRACTICAL THAN IT LOOKS, quality home drill kit constructed from high strength heat treated CRV, corrosion and rust resistant finished where needed for durability and extended tool life.
  • PINK DRILL DRIVER, tool set with drill equipped with 2-speed, 19 torque settings gives enough variability for wide applications. Ideal drill kit for home maintenance and garage repairs.
  • CLASSIC ALL-ROUND PINK TOOL KIT, the most useful and necessary tools for home daily use including drill driver, bits, hammer, adjustable wrench and other basic hand pink tools, for both man and ladies.
  • ALL IN ONE TOOL BAG, great tool set for home. It comes with a handy tool bag that stores everything neatly. Wide mouth open makes you find tools easily.
Check Stock

ComeFloor Angle Grinder Attachments Drill Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Adaptor Compatible with Dewalt, Makita, Milwaukee Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools.
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
  • This adapter is designed for European M14 tool attachments to be used with North American power tools with 5/8 inch-11 threaded spindles. 5/8 inch-11 thread is the standard for North American Tools Metric 14 (M14) is very common for European Tools.
Check Stock

27 Pieces Pin Vise Hand Drills Bits Set Include Pin Vise and Semi-automatic Spiral Hand Drill Rotary Tool with 25 Pieces 0.5-3 mm Micro Twist Drill Bits for Resin Polymer Clay Craft DIY Jewelry Electr

  • Semi-automatic design: the semi-automatic rotary drill adopts a semi-automatic design, which can drill holes by pressing up and down, improving the drilling efficiency and saving time.
  • You can use these 2 pin vise hand drills together, use the black hand drill bit at first, and then use the blue hand drill bit to drill for a long time until the hole is drilled.
  • Durable material: these 2 kinds of pin vise hand drills are made of aluminum alloy, not easy to break, adopting 3 claws chuck and 0.3 - 3.4 mm range of adjustable clamp, their tail can be rotated, easy to use.
  • Replaceable design: the semi-automatic hand drill is equipped with different sizes of micro drill bits, providing convenience to choose a proper one and drill different sizes of holes.
  • The micro drill bits are suitable for handling wood, plastic, rubber, PVC, walnut, model, bone, angle, amber, olive, fiberglass and so on.
  • Practical and portable: the manual hand drill set is lightweight and can be tucked into your bag easily, occupies little space.
  • Useful tools for electronic assembling, tooling, model making, winding, home decorating and so on.
  • 2 Kinds of drill bits: you will get 1 piece black pin vise hand drill, 1 piece blue semi-automatic rotary drill bit and 25 Pieces 0.5-3 mm micro twis....
Check Stock

Mini Portable Drill Press Stand,Drill Press Rotary Tool Workstation Stand,Universal Bench Clamp Desktop Drill Holder Workbench Repair Tool Table Top Drill

  • 【HIGH QUALITY MATERIAL】aluminum alloy base + solid column bar.
  • Drill Depth: up to 60mm(2.4"), single hole mount. This electric drill featured high concentricity and small vibration, efficient reduce the deviation..
  • 【FEATURE】This Adjustable Drill Press Stand is ideal for holding your drill steady during working time and allows for much more accurate drilling than hand-held operation..
  • 【AVAILABLE DRILL】This Adjustable Drill Press Stand is designed for use with any power drill with collar diameter of 43mm (or 38mm with supplied reducing bush) this accessory is great for any DIY-er or professional..
  • 【WHAT YOU WILL GET】Pack of 1 set drill press stand per parcel.Need to assemble.Not including the electric drill..
  • 【WIDELY APPLICATION】This is a new adjustable drill stand, perfect for shop or home use,Hobby tools, Ideal for Rotary tools, Power Drill, benchtop, perfect for home garage use,convenient and practical..
Check Stock

CIGOTU Right Angle Drill Adaptor,4-in-1 Impact Drill Bit Extension,360° Rotatable 1\\/4 3\\/8 1\\/2 Impact Grade Socket Adapter Set,105 Degree Angle Screwdriver Drill Bit for Household Workplace Industry

  • Package includes: you will get 1 piece of 105 degree right angle drill driver and 3 pieces of 360° Rotatable hex shank driver drill bits, which provide the various sizes of tools for you to use.
  • Quality material: these impact grade driver sockets adapters are made of chromium vanadium steel, and have strength and wear resistance, which are strong, stable, and not easy to break so that you can keep them for a long time.
  • Multifunction: 3-piece power drill sockets adapter sets, 360° rotatable hex shank impact driver socket adapter used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool. It is a good accessory for conversion. For universal socket, impact adapter and reducer set, universal joint set, socket adapter and drive reducer set, drive impact socket extension bar set, drive impact socket set.
  • Flexible tools: 360 degree rotatable socket adapter set can evenly distribute the torque load on a wider surface area, and allows access to a narrower workplace to significantly improve the performance, which is more convenient to use and saves your time and energy.
  • 105 Degree angle steel drill bit: the reliable 105 degree angle drill bit has the character....
Check Stock

46 Pieces Pin Vise Hand Drill Bits Set Include 1 Pin Vise Hand Drill 45 Mini Twist Drill Bit (0.3-3 mm) for DIY Wood Clay Resin Casting Molds Jewelry Pendant Making Supplies

  • How to use: when you get our pin vise hand drill, select a twist drill bit, put the clip into the drill bit, tighten and adjust to the tightness of the drill bit, install the selected drill bit, and rotate it in the right direction, then you can punch a hole.
  • Durable material: alloy material makes the pin vise hand drill more durable and not easy to get rust.
  • The mini twist drills are made of high speed steel, durable and not easy to blend while using.
  • Hopefully the pin vise hand drill bits set will give you a satisfying using experience, and the pin vise hand drill is equipped with 45 pieces mini twist drill bits.
  • Enough quantity for you to store at once for different uses on different occasions.
  • Various sizes: the size of twist drill ranges from 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6, 1.8, 2.0, 2.35, 3.0 mm.
  • Equipped with 2 different plastic boxes for your storage.
  • You can put them in different inner boxes according to the different size of the drill bit, no need to worry about losing any piece of them.
  • Practical and portable: the manual hand drill set is lightweight and can be tucked into your bag easily, occupies little space.
  • Useful tools for electronic assembling, tooling, mod....
Check Stock

Brian Auger s Oblivion Express A Better Land [Vinyl LP] [Stereo]

  • The Ultimate Survival Tools - This Hand Auger might be the most important piece of survival gear and equipment you own. Making an emergency shelter is....
  • Bushcraft Tools and Camping Tools - Carry this outdoor bush craft wood auger when you're outdoors camping, hiking, backpacking, bushcrafting, EDC or....
  • Scotch Eye Wood Auger Hand Drill- The first step is turning the 1 inch wood auger drill bit where you want a hole (Use a stick through the eye for....
  • Peg Maker - Another part of this survival multitool is the peg tool. The scotch eyed auger is has a cutting point for a peg wrench. Hammer into a....
  • Camping Survival Gear - Throw it in your bushcraft backpack as your ultimate bushcraft tool over other manual primitive tools and bushcraft survival....
Check Stock

Samfox 20pcs Spindle Sanding Drum Sander Tool Kit Set with Case for Drill Press

  • 20 PIECE DRILL PRESS ACCESSORIES: Create holes, smooth out rough edges and cuts, polish jade and other art materials, or contour irregular shapes into your projects with the 20 Piece Drill Press Sanding Drum Kit.
  • Use these drum sanders for woodworking and metalworking.
  • All pieces are packaged in a plastic blow-molded case for convenient storage, safe travel, and easy organization.
  • PERFECT SIZE ROTARY SANDING DRUMS FOR YOUR NEEDS: This drill press drum sander kit includes 4 reusable barrel sander arbor drum sander bit attachments that can fit your tools.
  • Each sanding bit provides a different diameter to meet your needs..
  • FITS YOUR TOOLS: Ideal for use with your rotary tools such as drill presses, spindle sanders, hand drills, or flexible shaft attachments.
  • Easily screw the shank of one of the sanding drill bit attachments into your tool then slip the correct sized sanding band over the mandrel and begin using your tool.
  • REPLACEMENT SANDING SLEEVES: Not only does this drill sander kit include 4 reusable rotary tool sanding drums, but it also includes 4 replacement sandpaper bands for each size mandrel for a total of 16 sanding bands.
  • Each size features two 80 and two 120 sand paper grits to meet your needs.
  • BUILT TO LAST: The 4 drill sanding attachment bit....
Check Stock

Angle Grinder Attachment M14 Adapter 5/8 inch 11 Female to M14 Male 12,000 RPM Rated Wire Wheel Drill Adaptor Compatible with Dewalt, Makita, Milwaukee, Hitachi, Ryobi Tools

  • Heavy-duty, solid steel, commercial grade adapter for using a European attachment (Metric 14) on North American 5/8"-11 angle grinder, grinder saw, concrete angle grinder. 12,000 RPM rated. Female side is 5/8"-11 and male side is M14 threaded. Mortar rake adapter.
  • M14 side is 0.75 inch long. You can use M14 Threaded Mortar Rake, Diamond Tools, masonry hole saw, drill grinder attachment, polishing rake, polisher attachment, diamond wire saw, hole saw drill attachment with your standard American 5/8" 11 threaded power tools..
  • This wheeler angle grinder drill chuck adapter has a water hole in the center for cooling diamond tools, diamond hole saw, diamond core drill bits..
  • If you have a 5/8"-11 standard North American power tool, this american to european adapter will help you use M14 (metric 14) a female threaded wheel polisher drill attachment, diamond core drill bit, hole drill attachment, angle grinding wheel, angle grinder polisher..
  • Standard small hand polisher can utilize this angle grinder arbor adapter or M14 drill adapter for a polishing spindle, metric hole saw, mortar rake..
Check Stock

WSOOX Square Hole Drill Bits for Wood, Woodworking Hole Saw Mortising Chisel Drill Bits (Size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch)

  • 【Purchase Notes】The square hole drill bits need to be used in conjunction with the mortise machine. These drill bits not usable with a hand held drill. If you want to use these drill bits on drill press, you need accessories to connect to a drill press..
  • 【Drill Bits Sizes】Drill bits diameters: 1/4 Inch (6.4mm), 5/16 Inch (8mm), 3/8 Inch (9.5mm), 1/2 Inch (12.7mm)..
  • 【Easy to Drill】The carbide drill bit tipped is sharp and wear-resistant. With high hardness and long service life. The drill sleeve has a U-shaped design to facilitate the discharge of wood chips and improve the drilling efficiency..
  • 【Widely Applications】This square hole drill bit is suitable for wood, including MDF, MDF, particle board, channel wood, pine wood, basswood, etc. Note: It is not suitable for processing metal, glass, plastic, concrete, gypsum board etc..
  • 【After-sale Service】WSOOX tools store provide customers with quality but affordable tools. If you have any problem with these square hole drill bits, please contact us feel free and we will reply you within 24h..
Check Stock