Top Hole Drilling Tools

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • 152mm 6" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

HSS Hole Saw Kits for Metal, Rocaris 23 pcs High-Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter Tool for Stainless Steel,Copper, Iron 16~100mm

  • 【Innovative three-blade design】Designed as Three-blade for layered cutting, the Hole Saw Kit for Metal can make the cutting resistance smaller and chip evacuation smoother.It can extend the service life..
  • 【Top Quality】Made of High Speed Steel, the Titanium-plated cemented carbide Tooth are sharp, anti-rust and durable.Ideal for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • 【Fast Cutting】The teeth of metal hole saw kit are designed as front and rear low top tooth profile and Three-blade, which make it more efficient than flat tooth drilling..
  • 【Multipurpose Tools】The carbide hole saw set are widely used in stainless steel plate, hard metal, iron, mild steel, alloy steel, aluminum, FRP, and plastic to drilling holes. Not recommended for tile, glass, concrete, stone..
Check Stock

MORETOPGOOD Hole Saw Set, 25PCS Bi-Metal Hole Saw Kit with 1-3/4\ to 1-1/2\ Saw Blades with 10 Hole Saws, for Engineered Wood, PVC Board, Plastic, Plywood for Home Hole Saw Set, Drill Bits

  • Complete Hole Saw Set: Includes 10 hole saws: 3/4″, 7/8″, 1-1/8″, 1-3/8″, 1-1/2″, 1-3/4″, 2″, 2-1/8″, 2-1/4″, 2-1/2″ for different needs, 10 x spare pilot drills for replacement, 1 x large mandrel, 1 x small mandrel with medium adapter and 1 x plastic case for easy storage, 1 x hex key.
  • Professional Quality - Hole saw kit is made of high-speed steel (HSS) Bi-Metal for rust-proof and wear-resistant, 2mm thickness, much more durable for longer life.
  • Precision drilling-Optimized sharp uniform tooth profile design, center positioning, and precise drilling. The hole knife can easily penetrate metal and wood, prevent slippage, and is easy to remove chips, providing you with clean, fast and high-precision cutting.
  • Suitable for a Variety of Materials-very suitable for drilling holes in metal, wood, PVC board, plastic board, drywall, and gypsum board. Widely applicable to most drilling rigs.
  • MORETOPGOOD's Guarantee - We're aimed to provide you superb quality tools, If you have any issues with our hole saws set, feel free to contact us for troubleshooting help, parts, replacement, or refund.
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • 102mm 4" CARBIDE GRIT HOLE SAW For Drilling Holes In Tough To Drill Materials, Regular Toothed Hole Drill Bit Would Go Dull If Used As A Drywall Hole Saw But With Carbide Tipped Tool Bits They Are Tougher And No Teeth To Snag And Go Dull..
  • TUNGSTEN CARBIDE GRIT Hole Saws Are Professional Tools Construction Tools Electrician Tools And Plumbing Tools Whether It Be For Diy Home Improvement Or Remodelling. Drill Holes Through Brick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fib....
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

Utoolmart 95mm Diamond Grit Hole Saw Drill Bit for Glass Ceramics Porcelain Ceramic Tile 1Pcs

  • 【Material】- The hole saws are made of diamond and high carbon steel, offering a combination of hardness and toughness for wear resistance..
  • 【Efficiency】- Small incision resistance,feature drilling stably, fast speed, not breaking the border Opening neat, smooth, no broken edges, no....
  • 【Advantage】- Side holes allow for easy slug removal after drilling. Perfect for cutting accurate holes in a wide variety of materials such as....
  • 【Feature】Diamond coating maximizes performance and retains a sharper cutting edge than traditional carbide or bimetal hole saws..
  • 【Wide Application】- Diamond hole saw drill bit can be used with a standard electric drill Cut perfect circles with these tools, Suitable for....
Check Stock

3 in 1 Pocket Hole Jig Kit with Wood Dowel Punch Locator, Woodworking Doweling Jig Set with 8 10 15mm Drill Bit, Adjustable Woodworking Drilling Locator Puncher Tools

  • Unique Design: The tool is designed with 2 brass, which makes the positioning of the woodworking more precise, the drilling guide positioning jig fits you perfectly, can further improve the accuracy, mark and align the jig to get the desired result.
  • Precise Positioning: 8/10 mm punching range. When drilling, you can adjust the precise alignment of the metal bushing, adjust the drilling height and drilling depth according to your needs, and equipped with locator, improve the accuracy of drilling.
  • High-Quality Material: The 3 in 1 adjustable woodworking drilling locator puncher tool is precision-machined from high-quality aluminum alloy, which is stable and corrosion-resistant. Anodized finish and hardened steel center block construction is durable, large steel clamp screws tighten tools like a vice, and a sturdy aluminum surface holds your product securely for extended use.
  • Complete Set: 3-in-1 drill guide punch locator tool is equipped with 8mm and 10mm drill bits, and 1 x 15mm hole saw to meet your needs for different hole diameters. Built-in self-tightening clamps allow you to hold wood for drilling.
Check Stock

Dry Diamond Drill Bits Set 1/4” Hex Shank Vacuum Brazed 6mm Hole Saws for Porcelain Granite Tile Ceramic Marble for Steady Grips in Most Popular Drills, 2 Packs in Individual Storage Cases

  • 1/4” Dry Diamond Drill Bits - Set of 2 Packs 6mm Vacuum Brazed Diamond Hole Saws for drilling holes in hard materials such as Granite, Porcelain, Tile, Ceramic, Marble, Stone, Glass, Brick.
  • Fit Universally – These Dry Diamond Core Drill Bits Built with 1/4” Hex Shank compatible with most hand-held drill, drill press and any other tools with chucks that accepts 1/4” Hex Shank bits.
  • Make Tough Jobs Easier – Diamond coated drill bit drilling through things like porcelain tile smoothly and easily without cracking or chipping the delicate materials.
  • starting the bit on an angle will prevent drill bit from “walking”.
  • For Professional & Hobby – Decent Diamond hole saws ideal for drilling holes through hard tile to install shower doors, drilling holes in ceramic plant pots vases glass bottles for hobby projects.
  • Convenient Dry Drilling – Wax Filled Diamond Core Bit with wax inside to cool the bit while dry drilling perfect for jobs where water is not applicable.
Check Stock

Kreg Tool Company KMA3220 5mm Shelf Pin Jig

  • Hardened Steel Drill Guides ensure straight drilling.
  • Dual Position 37mm (1-1/2-Inch), 66mm (2-1/2-Inch) Adjustable Fence requires no tools.
  • Locating Pin lets you quickly reference the last hole drilled.
  • Jig Extender allows you to connect multiple jigs together for high speed work.
  • Standard 32mm Hole Spacing with 5 mm hole size.
Check Stock

Meccion Diamond Drill Bit Brazed Core Hole Saws Performance Hollow Hole Cutter for Glass/Tile/Granite/Marble/Porcelain 6mm-50mm 11pcs Set

  • Professional Diamond Hole Cutter: With Special design of diamond brazed For porcelain, glass, marble, ceramic, rock and granite etc..
  • High Quality Hole Drilling: Made from carbon steel with diamond blade ideal for drilling clean and accurate holes and cut a perfect circles with these tools.
  • Longer Service Life: Heavy duty hole saws gives superior performance, Durability is more than 8X.
  • Tips: Electroplated diamond coating will wear off if the tool gets too hot. Never let your drill bit run dry..
  • Package Include: 6mm (15/64"), 8mm (5/16"), 10mm (25/64"), 12mm (15/32"), 16mm (5/8"), 20mm (25/32"), 22mm (3/4"), 25mm (31/32"), 30mm (1-3/16"), 38mm(1-1/2"), 50mm (1-31/32") diamond hole saw drill bit set of 11 pack.
Check Stock

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock