Top Hole Saw Cutter Set

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

8Pcs Concrete Hole Saw Kits with 40mm 65mm 80mm 100mm 125mm 5pcs Carbide Steel Wall Hole Saws, 110mm Connecting Rod with SDS Plus Shank, 2 pc Center Drill Bits for Brick Cement Stone Wall

  • This hole saw cutter kit are made of high quality carbide tipped metal, hard and durable.
  • The connecting rod is 110mm long and with SDS plus shank..
  • This hole saw cutter kit can be used in drilling walls, stones, installing air conditioners, range hoods, pipeline opening, etc..
  • You will get 8pcs items, 5pcs hole saw cutters, 1pc 110mm connecting rod and 2pcs 110mm center drill bit..
  • The concrete hole saw kit is very easy to install and operate..
Check Stock

ASNOMY 12Pcs M42 HSS Bi-Metal Hole Saw Set, 11/16 inches - 3 inches Large Size Hole Opener Hole Saw Cutter Tool for Drilling Cornhole Board, Plastic, Pipe, Wood, Fiberboard, Soft Metal

  • 12PCS Bi-Metal Hole Saw Kit: Include 11/16″(18mm) , 13/16″(20mm), 15/16"(24mm), 1-1/8"(28mm), 1-3/16"(30mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(45mm), 2"(50mm),2-3/16"(55mm),2-9/16"(65mm), 3"(75)mm,a variety of sizes can meet your different needs,the cutting depth is 1-3/16"(30mm). Each hole saw has a arbor with drill bit..
  • Top Quality: This Hole saw set made from M42 HSS and Bi-Metal,make it have higher hardness (≥64HRC) and higher toughness than standard hole saw, better cutting performance, so that it can cut ceiling tiles and gypsum board smoothly.
  • Cutting is more efficient and clean: The hole cutter made of heavy-duty bimetal and unique sharp HSS has sharper teeth, and has four chip evacuation holes, which has more powerful chip evacuation capability. Make it possible to quickly remove the cutting material, and the cutting edge is smoother.
  • Wide Application: This 4 hole Saw blade perfect for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling..
  • Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP..
Check Stock

SHEUTSAN 100 mm SDS Plus Shank Concrete Hole Saw, Premium Metal Hole Saw Cutter, Hole Saw Drill Bit for Wall, Concrete, Brick, Stone, Cement

  • ... drilling speed is very fast. During the drilling process, the chips can be cleanly removed so that you can work continuously and efficiently, which is very convenient and fast. It has a cutting diameter of 100 mm (3.93 inches) and a cutting depth of 60 mm (2.36 inches)..
  • SUPERB CRAFTSMANSHIP - The concrete hole saw cutter has been adopted superb high-frequency welding technology to make it have smooth welding mouth, strong welding interface and exquisite appearance. It can be used for a long time even under severe conditions..
  • MULTIFUNCTIONAL USES - The SDS Plus Shank concrete hole saw can quickly and easily drill holes in walls, cement, stone, adobe and bricks. They can be widely used to install air conditioners, sewers, water heaters, exhaust pipes, range hoods, water pipes and so on..
  • SATISFACTION WARRANT - You can get 1 set metal concrete hole saw. Please check the package after receiving the product. For any questions about the product, please feel free to contact us, we will be happy to provide you with satisfactory service within 24 hours!.
Check Stock

Hole Saw M42, Corn Hole Drilling Cutters, Heavy Duty Metal Hole Cutter for Wood Cornhole Boards Aluminum Plastic with Open Saw (Red, 150 mm/ 6 Inch)

  • Sturdy and reliable material: corn hole saw is made of durable and reliable material, with high wear resistance, fast and clean cutting for the hard materials, which can be applied to perforated cast iron panels, aluminum panels, plastics, wood.
  • Easy to operate: saw hole cutter has wonderful cutting performance, featuring with non-binding clean edge design, easy to operate, after drilling, the spring on the drill will automatically push the disk out of the saw.
  • With high hardness and toughness, built tough for repeat use.
  • Wide range of usage: wood hole cutter is designed for wood, plastic, iron plate, ceiling lamp, cinder wall, corn orifice plate cutting, handy and portable, save time and effort.
  • Fit for: 6 inch hole saws feature with M42 Hss teeth and carbon steel belt, the mandrel and bit can be rotated clockwise, suitable for most 1/2 inch bits, the drilling depth is up to 3 - 25 mm.
  • Ready to use: pointed teeth with small vibration, sturdy and hard drill allows you to operate more stable and high-efficiency, clean edge design makes the hole saw cut smooth and fast.
Check Stock

Hole Saw M42, Corn Hole Drilling Cutters, Heavy Duty Metal Hole Cutter for Wood Cornhole Boards Aluminum Plastic with Open Saw (Red,160 mm/ 6.3 Inch)

  • Sturdy and reliable material: corn hole saw is made of durable and reliable material, with high wear resistance, fast and clean cutting for the hard materials, which can be applied to perforated cast iron panels, aluminum panels, plastics, wood.
  • Easy to operate: saw hole cutter has wonderful cutting performance, featuring with non-binding clean edge design, easy to operate, after drilling, the spring on the drill will automatically push the disk out of the saw.
  • With high hardness and toughness, built tough for repeat use.
  • Wide range of usage: wood hole cutter is designed for wood, plastic, iron plate, ceiling lamp, cinder wall, corn orifice plate cutting, handy and portable, save time and effort.
  • Fit for: 6.3 inch hole saws feature with M42 Hss teeth and carbon steel belt, the mandrel and bit can be rotated clockwise, suitable for most 1/2 inch bits, the drilling depth is up to 3 - 25 mm.
  • Ready to use: pointed teeth with small vibration, sturdy and hard drill allows you to operate more stable and high-efficiency, clean edge design makes the hole saw cut smooth and fast.
  • Warm note: please check the size before purchase.
Check Stock

ZOENHOU 2 Set 3 Inch 75 mm Hole Saw with Arbor, 1 1/4 inch Cutting Depth HSS Bi-Metal Hole Cutter, Hole Drilling Tool Drill Bit Saw for Cutting Wood, Metal, Plastic, Fiberboard

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi-metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.43 inch hex shank arbor with two pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL- This complete HSS hole cutter including 2 pieces 2-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.43 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 3 Inch 75 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our first priority..
Check Stock

3 Pieces Reciprocating Saw Blades Wood Pruning Saw Cutter Includes 6 /6TPI 9 /6TPI 9.5 /5TPI Saw Cut HCS High Carbon Steel Reciprocating Saw Set for Cutting Wood Plastic

  • The package contains: HCS high-carbon steel reciprocating saw set contains 3 sizes of saw cutter, including 6"/6TPI saw cutter, 9"/6TPI saw cutter,....
  • Material: this saw cut set is a high carbon steel saw cutter with high strength and hardness, high elastic limit and fatigue limit, and strong cutting....
  • S644D model saw: 6"/6TPI (150 mm/ 4 mm), suitable for cutting construction wood (6 - 100 mm), wood board (.
  • S1111DF model saw: 9"/6TPI (225 mm/ 4 mm), suitable for cutting wood with metal or nails, wood chipboard (10 - 100 mm), plastic profile (φ5-175 mm),....
  • S1531L model saw: 9.5"/5TPI (240 mm/ 5 mm), suitable for fast cutting rough wood, garden wood (φ15-150 mm).
Check Stock

MUKCHAP 110 mm Hole Saw SDS Plus Shank Hole Saw, Hole Saw Drill Bit for Wall, Concrete, Brick, Cement

  • QUALITY MATERIAL - The shank masonry hole saw cutter is made of hard alloy steel, which has high hardness and is not easy to deform. The hole saw is stable and powerful, and the work efficiency of the drilling operation is improved..
  • EASY TO USE - The shank on the connecting rod works with SDS Plus tools. The hole saw kit is easy to use, simple to operate, and the drilling speed is very fast. During use, the chips can be cleanly removed to achieve continuous and efficient operation..
  • APPLICABLE SIZE - The hole saw diameter is 110 mm (4.3 inches). The bit shank will fit in a 3/8 inch drill. The 110 mm hole saw has been adopted fine craftsmanship and strict design, so the welding interface is very firm and precise. You can get a neatly cut round hole..
  • WIDE RANGE OF APPLICATIONS - This masonry hole saw kit drills through most common wall materials, such as brick, adobe, concrete, and cement. Suitable for drilling walls, hollow brick to operate air conditioning holes, pipe holes and so on..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our 110 mm concrete hole saw within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedi....
Check Stock

8Pcs Concrete Hole Saw Kits, 40mm 65mm 80mm 100mm 125mm 5pcs SDS Plus Shank Masonry Hole Saw Cutters, 110mm Connecting Rod, 2 Center Drill Bits for Cement Brick Wall

  • This Concrete Hole Saw Kit has 8 pieces included. 5 pieces hole saw cutters: 40mm, 65mm, 80mm, 100mm, 125mm. One piece connecting rod 110mm, and 2 pieces drill bits..
  • The wall hole saw cutter kit are made of high quality alloy metal for long time use..
  • This Cement Hole Saw Drill Bit is Very easy to use with fast speed..
  • These Hole Saw Cutters are Mainly used in drilling walls, stones, bricks or installing air conditioners, range hoods, pipeline opening, etc..
Check Stock

ZOENHOU 2 Set 4 Inch 102 mm Hole Saw with Heavy Duty Arbor, Hole Cutter HSS Bi-Metal, Heavy Duty Steel Blade Hex Shank Drill Bits Smooth and Fast Cutting of Wood, Iron, Hard Plastic, Galvanized Pipe

  • TOUGH MATERIAL - Our heavy-duty hole saw is made of HSS M42 and BI metal with high wear resistance, high toughness, and high hardness, which has superior performance and higher cutting strength than other hole saws..
  • SMOOTH AND QUCIK CUTTING - The best cutting performance of bimetallic belts and HSS teeth with non-binding clean edge design can bring perfect cutting results of the bi metal drill bit: easy and fast, smooth and clean cutting..
  • EFFICIENT AND DURABLE - 0.44 inch hex shank arbor with 2 pins protects the saw from slipping. 4 slots on the cutting blade push the arbor out of the circle drilling the saw kit easily. Its extreme durability ensures no teeth breakage for any tough job..
  • ONE SET WORKS IT ALL - This complete HSS hole cutter including 2 pieces 4-inch hole saw, 2 pieces Allen wrench, 2 pieces hex shank arbor(0.44 in), and 4 pieces drill bit(2.8 x 0.24 in) are perfect for any power drill to cut round holes in drywall, wood, plastic, soft plaster, thin slate..
  • 100% RISK-FREE SHOPPING - If you are not satisfied with our 4-Inch 102 mm hole saw, you will get a 30-day warranty and 24/7 customer service after receiving it. Just remember that your satisfaction is our top priority..
Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock