Top 0 10v Signal Control

PWM Signal Converter Module Digital to Analog Voltage Converter Adapter White

  • PWM voltage converter Convert 0-100% PWM digital signal into analog signal..
  • Signal interface switching between single chip or other industrial control board..
  • The power supply has the function of reverse connect protection, safe to use ..
  • Input digital signal can be 24V level 0-100%PWM signal. Output analog signal can be 0-10V voltage..
  • PWM signal receiving frequency range: 100hz-3khz, recommended 1khz-3khz..
Check Stock

Diamond Audio MICRO4V2 4-Channel 600 Watts RMS Class D Amplifier

  • ...hnology | Bridgeable for high power operation (CH1+CH2/CH3+CH4) | Balanced differential inputs for superior noise rejection.
  • Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Input selector switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
  • RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
  • Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level: 200mV - 10.0V | High Input Level: N/A | Input Impedance - Low Input Level: 20KΩ | High Input Level: 20KΩ.
  • Output Stage - Output Impedance: 0.018Ω | Dampin....
Check Stock

10V-12.8V AC/DC Adapter Replacement for Water Tech PBA099-US-EU PBA099 PBA099L TL02-128025U WTPBA099 PBA099-EU LC099-3S Battery Powered Pool Max HD ivac M3 M2 350 Vac Vacuum Cleaner Charger

  • New Global 10V - 12.8V 250mA 1.0A AC / DC Adapter Replacement for Water Tech PBA099-US-EU PBA099 PBA099L WTPBA099 PBA099-EU PBA099USEU PBA099AUL TL02-128025A PBA099AUS PBA099-AUL PBA099-AUS Water Tech 10V Pool Blaster Max CG, Millennium, Eclipse XL ACDC Charger PBA 099 Battery Powered Pool Vacs Max HD Watertech ivac M3 M2 Vac Vacuum Cleaner DC10V - DC12.8V DC12.6V 10.0V 12.6V 1000mA 12.6VDC 10VDC - 12.8VDC 0.25A - 1A Switching Power Supply Cord Cable Wall Home Battery Charger Mains PSU.
  • Compatible with: Water Tech Pool Blaster PBA099L PBA099 L CAT099 TL02-128025U TL02128025U Watertech 10V 1.0A 12V - 12.8A 250mA - 1A I.T.E.
  • Water Tech PBA099-US-EU PBA099 PBA099L WTPBA099 PBA099-EU PBA099USEU Pool Blaster Battery ACDC Charger WaterTech 10VDC 12.8VDC 250mA 1.0A Power Supply Charger.
  • WATER TECH ITEM No. PBA099-8-US-EU PBA099-8-US-EU-QUICK MFD 073015 11.2V 1.0A 11.2VDC 1A I.T.E Power Supply Fits Pool Blaster Max CG, Millennium, Eclipse XL, Volt FX-8.
  • Compatible with: Water Tech 10V Pool Blaster Max CG, Millennium, Eclipse XL Charger PBA099 PBA 099 PBAO99 Battery Powered Pool Vacs Max HD Watertech ivac M3 M2 350 ivacM3 ivacM2 ivac350 MaxCG MaxHD Vac Vacuum Cleaner And Sp....
Check Stock

NOYITO Voltage to Current Module 0-10V to 0-20mA

  • NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
  • Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
  • Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
  • Easy to use, can be fine-tuned by potentiometer.003cbr003e.
  • Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
  • 【Manufacturer's One-year After-sale Warranty】.
Check Stock

AD8317 Logarithmic Detector, RF Log Detector Logarithmic Detector, Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller

  • [Main function]: This logarithmic detector is designed for ADI's AD8317 chip and is used for RF signal power detection..
  • [Detection frequency range]: The detection frequency range of the logarithmic detector is 1M-10GHz, and it can detect RF signals with a power of -55dBm to -0dBm, and convert the RF signal into a DC voltage output..
  • [Excellent performance]: The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which will expand the dynamic range of the detected signal by 55dB..
  • [Wide use]: The logarithmic detector is widely used in radio frequency signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control..
  • [Stable and durable]: This logarithmic detector can withstand high and low temperatures, is stable and durable, with a temperature measurement range of 0°C to 1024°C, and a converter temperature resolution of 0.25°C..
Check Stock

Extech 412355A Current and Voltage Calibrator/Meter

  • Precision source for calibrating process devices and measuring DC process signals.
  • Oyster case with flip-up display is ideal for handheld or benchtop applications.
  • Large 3-1/2 digit LCD display and touch keypad.
  • Display readings in mA or as a percent of the 0 to 24mA range or as mV in voltage ranges.
  • Provides adjustable 0 to 24mA and 0 to 10V calibration source.
Check Stock

Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity

  • Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
  • Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
  • PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
  • Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
  • Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
Check Stock

Czepa 9V Charger Compatible with Black and Decker Screwdriver LI2000 LI3100 Cordless Drill Replacement Original Part Number 90593303 & 90593303-01

  • SPECIFICATION: AC Input: 100-240V 50-60Hz, DC Output: 9V-10V 100MA(0.1A).
  • COMPATIBILITY: Replacement Black & Decker LI2000 Cordless Screwdriver Laminate Trimmer Charger part number 90593303 and 90593303-01. Fit Models: LI2000 Type 1 LI3100 Type 1 LI3100 Type 2 LI3100 Type 3 BDCS20C Type 1 BDCS40G Type 1 GSL35 Type 1 and CA Model.NOTE: 10V Charger Compatible with Black Decker ONLY for Cordless Drill ,⚠️⚠️NOT Compatible Dustbuster Handheld Vacuum.
  • INCOMPATIBILITY:Pay Special Attention. The Charger is Not Compatible With Vacuum Cleaners! !.
  • BRAND NEW CONDITION: Charges for Black and Decker 10V Cordless Drill.
  • RELIABILITY: Our Products Will Charge Your Device as Efficiently As the Original Charger, or Any Other Replacement.
Check Stock

BiXPower 12V to 24V Fan-Less Converter Compatible with ResMed AirSense 10 Series CPAP Machines - DM90S10

  • This BiXPower DC power adapter can convert 12V DC (Range 10V ~ 30V) power to 24V DC power with special configuration cable and a special connector that is compatible with ResMed Airsense 10 devices. This DC Converter works for AirStart 10, AirSense 10, and AirCurve 10 machines manufactured by ResMed..
  • Features: Super small size: dimension is 2.5" x 1.9" x 0.7" ( 63.5 x 48.9 x 16.9mm).
  • Acceptable Input Voltage: 10V ~ 30V DC -Output Voltage: 24V.
  • Maximum Output Power: 90W. -USB output: 5V , 2.4A.
  • Package Contents: 12V to 24V Power Converter x1.
  • Special Output Cable for ResMed S10 series x1.
Check Stock

Massive Audio EX44 - Car Audio 800 Watt, 200w x 4 RMS, Nano Edge Series, 4 Channel Car Amplifier, Bass Boost

  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding or underperforming car amplifiers. Your car audio system would not be complete without our multi-channel Massive amplifier. This car audio amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. Input Level 0.4V - 10V Hi Inputs or Low Inputs..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS RATED POWER | Get more wattage and quality sound for less money! That is our guarantee! You don't need to set the gains to low to avoid distortion. These car amplifiers provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry..
  • GREAT QUALITY PRODUCTS THAT WILL LAST LONGER | With 5-Way Advanced Protection and custom high-grade components your investment will last! With our extra features like Built-in Noise Reduction Circuitry, Auto Sensing Turn On Function, 12V Remote Output for External Devices (Hi-Level Inputs), and 4 Layers PCB design with SMD parts ensure you get your money's worth!.
  • MASSIVE AUDIO QUALITY GUARANTEED. Since 1999, Massive Audio has been an industry leader....
Check Stock

Wireless Dog Fence System, Electric Dog Fence, Dog Training Collar with Remote 1.15 Mile, 3 Safe Training Modes, Security Lock, Flashlight, IPX7 Waterproof Shock Collar for All Breeds, Sizes

  • 【Electronic Fence Function】Detect the dog's location at any time to prevent the dog from getting lost. Turn on the function, signal range: 0 (mini) - 99 (max), signal decrease means the dog is gradually walking away, when your dog exceeds the remote control radius 492FT/164 Yards(Double Circle) and 984FT/328 Yards(Single Circle) range, The remote control will notify you with warning sounds..
  • 【Professional Dog Shock Collar】3 Intimate Training Modes (beep, 0-9 vibration, 0-30 shock mode). Dog shock collar can effectively and scientifically assist you in training your dog. The remote's flashlight (can be turned on when off) help you find your dog quickly in dark environments..
  • 【Up to 1.15 Mile Control Range】Compared with other remote control ranges of only 1000-2000FT, KAIYIKAPET upgraded dog trainer can reach 1.15 Mile/5905FT, and the obstacle range is 1/3 Mile /1755FT. Super two-way transmission signal, don't worry about losing the signal..
  • 【Extra Long Battery Life】The rechargeable training collar can be quickly charged within 2 hours, and the dog receiving collar and remote control can work for 90-150 days w....
Check Stock

Sonic Imagery Labs Model 312A Discrete VCA Compressor Limiter Module

  • Ultra Low Total Harmonic Distortion, 0.0004 THD+N @1kHz.
  • Operates over ±10V to ±24V supply rails.
  • Particular emphasis on audio performance.
Check Stock