Top 1 2 Hp Motors - BuyWiseBest.com

LotFancy Go Kart Clutch 3/4 Bore 12T with #35 Chain, Centrifugal Clutch Fit for Go Kart Minibike Honda Engines, With 2pcs Set Screws & 1pc Connecting link

3/4" Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain, Common Clutch for 2-7 HP Engines, Engagement Speed 2300300 RPM.
Perfect for Go Kart, Minibike and Fun Kart.
Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4 shaft.
Also fits any other engines with 3/4 crank shaft and 3/16 key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.

【Compatibility For】Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh....
【Also Fits For】Also compatible with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
【Replace Numbers】PBH540687. Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
【Recommended Engine】2HP - 7HP, 3/4" shaft with flat key.
【Package included】1*Centrifugal Clutch, 1* #35 Chain, 2*Set Screws and 1*Connecting Link.

Powered by industry standard 2- or 3-wire motors.
Thermoplastic discharge and motor bracket.
Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP).

Fitment: for 3.5HP 3.6HP 2 strokes Boat Outboard engines motors.
Good working condition and easy to install..
Carburetor for Hangkai 3.5HP 3.6HP 2-Stroke.
Pre-adjusted carb before shipping, no extra adjustment needed,Replaces existing stock carburetor, just replace and ride again..

The ROP Shop replacement Power Pack Assembly for 1997 Johnson, Evinrude 5, 6, 8, 25 HP Outboard Motors.
Specs - Refer to images 2 & 3 for more information.
Fits/For: 1985-2001 (4-60 HP) & 2003-2005 (6-8 HP) engines with a 2 wire timer base NOT requiring an RPM limiter.
Uses a 2 wire trigger sensor. Please be sure to check your part or model number to ensure this is the correct switch box for your unit. Also, please....

Powered by industry standard 2- or 3-wire motors.
Thermoplastic discharge and motor bracket.
Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP).

【BROAD COMPATIBILITY】: This 3/4 clutch 35 chain Perfect for Go Kart, Mini bike, Fun Kart, and any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands..
【FITMENT】: Fits for 2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs & Stratton 2 – 6.5 HP with 3/4″ Shaft 212 212cc Predator Engine Clutch, and Common clutch for 3.5-7hp engines using #35 Chain..
【WORK WITH】: 3/4″ Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM..
【PACKAGE INCLUDED】: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link..
【LIFETIME WARRANTY】: Go Cart centrifugal clutch and chain from Youxmoto comes complete with a lifetime warranty. If you are not satisfied with our products, 100% refund or resend..

Brand NEW WEG Compressor Duty Electric Motor 5HP 56 FRAME 20.3 AMP 230 VOLT.
DESIGNED TO REPLACE 56 FRAME MOTORS ONLY, INCLUDES MANUFACTURERS WARRANTY.
5HP 56 FRAME 3440 RPM 5/8" SHAFT DIAMETER.
230 VOLT MOTOR ( NOT SUITED FOR 208 VOLT APPLICATIONS).
WILL REPLACE 56 FRAME 5/8" MOTORS AND 5HP SPL MOTORS UNDER 15-21FL AMPS @ 230VOLTS.

★ Centrifugal Clutch, Go Kart Clutch 3/4 Bore 12T with #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM.
★ Perfect for Go Kart, Minibike and Fun Kart.
★ Fits Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4” shaft.
★ Fits any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
★ Package included: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.

Works with 4-stroke motors up to 15 HP or 2-stroke motors up to 20 HP with a maximum weight of 132 lbs..
Twist-knob safety locks provide increased torque rating while helping secure the bracket in place.
Built extra tough and extra wide for heavier 4-stroke engines.
Heavy-duty stainless steel torsion springs for easy lifting.
4-position lock bar and 11" of travel allows for a better range of trim adjustments.

Powered by industry standard 2- or 3-wire motors.
Thermoplastic discharge and motor bracket.
Stainless steel pump shell, control box included with all 3-wire pumps (1/2 HP to 1 HP).

★ Go Kart Clutch 3/4" Bore 10 Tooth for #40/41/420 Chain, Fit for go kart, Mini Bike, Lawnmower and fun kart, 3/4" Bore Designed for predator 212....
★ Centrifugal Clutch Fits 2-6.5HP Small Engines HONDA GX120, GX140, GX160, GX200, GC160, GC190.
★ Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 2-6.5HP motors in all brands.
★ Tooth: 10 Tooth sprocket for #40/41/420 chain (Chain included).
★ Clutch Easy installation, a perfect replacement part for your mini bike and go kart. Package included: 1 x Centrifugal Clutch.