Top 1 cylinder

LEM Products 1606 5-Pound Stainless Steel Vertical Sausage Stuffer

  • Cylinder removes easily to fill and clean.
  • Hardened steel gears with a protective gear box.
  • Includes (Two) clamps to secure unit to counter top.
  • Approximate Dimensions: 15" (H) x 9 1/4" (W) x 6" (Deep).
  • Cylinder Dimensions: 8 1/4" (H) x 5 1/2" (Diameter).
Check Stock

12'' Dial Height Gage Black DIAL FACE Shockproof 8'' X 0.001'' Dial Height Gage

  • 【Compatibility】This cylinder honing tool has a wide range of applications, and meets or exceeds the original factory specifications, can be directly replaced to meet your various needs.Suitable for degreasing of engine cylinders with diameters of 3/4 in to 2‑1/2 in and 1‑1/4 in to 3‑1/2 in..
  • 【Adjustable】Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
  • 【Professional Tools】This cylinder honing tool has high accuracy and sensitivity,cylinderc Honing Tool is perfect to deglaze the walls of cylinders in gasoline and diesel engines. Idea for remove burrs and properly roughen the cylinder walls to produce an oil holding cross hatch pattern and provide an adequate seal..
  • 【High Quality Materials】This cylinder honing tool are made of high-quality iron material,no rust, and high strength for maximum durability.Manufactured according to strict quality control standards, the improved design can extend the service life..
  • 【Production Guarantee】From the purchase of original materials to the factory inspection of products, inspections must be carried out at every....
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

Dowinx Office Replacement Cylinder,Gas Lift Cylinder Universal Size Fits Most Chair,Class 4 Hydraulic Pneumatic Piston Heavy Duty 450Lbs

  • [INDUSTRY STANDARD SIZE] Fits Most Chairs: The office chair replacement cylinder is an international standard size, suitable for most chairs, such as office chairs, gaming chairs, executive chairs, etc. Save even more money by repairing lift function by replacing gas cyliners..
  • [Premium Quality] Our heavy duty pneumatic piston is the industry's highest grade class 4. And it passed the top-level test of BIFMA and TUV certification by lifting up and down 120,000 times without fail. This replacement cylinder can be used longer..
  • [Safe and Explosion-Proof] Our hydraulic cylinder built with high-quality solid steel that can support maximum weight up to 1000 lbs. The safety decompression structure design will be more secure than most gas lift cylinder and also have the explosion-proof..
  • [Size Information] Outer Cylinder : 2 inches.
  • The height of fully expanded: 16.9 inches.
  • The adjustable height: 5.5 inches. Please confirm the measurement before ordering..
  • [One Year Free Warranty] We will provide instruction service for removing and installing cylinder replacement. And we also provide 1 year free warranty service: when the cylinder fails, leaks, sinks, we will reissue a new cylinder for free..
Check Stock

Baldwin Estate 8031.102 Low Profile Traditional Single Cylinder Deadbolt in Oil Rubbed Bronzr

  • Traditional deadbolt, single cylinder with 5-pin keying cylinder, accommodates 1.625″ (1-5/8”) diameter cut-outs door prep.
  • Solid forged brass specially-designed reinforcing strike constructed of high-grade steel.
  • Low profile cylinder deadbolt for 1.625″ (1-5/8”) door prep features 0.5″ (1/2”) low profile cylinder projection.
  • Deadbolt case is formed of heavy gauged steel for strength.
  • most interior parts are made of solid brass.
  • Accommodates 1.75″ (1-3/4”) thick doors (conversion kits for 2″ and 2.25″ thick doors are sold separately, via Baldwin Customer service).
  • ANSI/BHMA A 156.13 Operational & Security Grade 1.
Check Stock

McAvory Storefront Door Commercial Mortise Lock Cylinder & Thumbturn Adams Rite Style Cam in Aluminum 1 Set

  • 1" Mortise Cylinder Sets Fit Adams Rite, Kawneer, Vistawall, & Most other Storefront Door Locksets.
  • Each Set Includes 1 Keyed Lock Cylinder & 2 Keys, 1 Thumbturn , Cylinder collars.
  • Standard 1-inch Length , Standard 1-5/32" Diameter Commercial Door Lock Mortise Cylinders.
  • For use with commercial Store Front Deadbolt, Hook Lock, and Deadlatch in Glass Doors with narrow aluminum Frame.
Check Stock

EWK Spark Plug Boot & Wire Removal Tool, Ignition Coil Puller for VW Audi T10112

  • 【 Work Smart 】 This spark plug boot removal Tool T10112 is a special tool for quickly remove the spark plug lead without destroying any component..
  • 【 Time Saver 】 The angled shaft fits well into narrow plug cavity with no manifold dismantling needed, reach the plugs on cylinder #2 and #3 smoothly..
  • 【 High Quality 】 Shaft and boot end are constructed from premium stainless steel for maximum strength and longevity. The ergonomically grip convenient to use..
  • 【 Applications 】 Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD). *Not recommended for non-VW/Audi plug leads..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

MYFULLY Office Chair Cylinder Replacement | Chair Gas Lift Cylinder 5 inch Long Extension Stroke Adjust Universal Size Lift Cylinder Fits Most Executive Chair Swivel Chair

  • Heavy Duty Office Chair Cylinder: The gas lift cylinder holds up to 385lb/175kg on most Swivel chairs. Hydraulic pneumatic shock piston is certified by SGS,high safety and explosion-proof,more durable..
  • 5" Piston Stroke for Adjusting Chair Height: Outer cylinder diameter: 1.9".
  • Smooth Operation & Noiseless: This chair cylinder replacement uses upgrade stainless steel lift rod. Full 360 degree rotation, smooth and noiseless movements to all directions..
  • Universal Chair Cylinder: Our office chair piston will fit most office, executive and computer chairs.(salon chairs, executive chairs, work chairs, rolling stools) on the market..
  • Easy to Install: This office chair cylinder replacement can be installed easily with no additional screws required. Take several minutes to refresh your old office chair and save costs! Package includes: a gas cylinder for office chair.
Check Stock

BTS GQ KOREA 2022 January BTS Coverman GQ_Group

  • Direct replacement parts. This K-0650 Cylinder and Piston Ring Replacement kit will fit both the single cylinder oil-free pumps and the twin cylinder....
  • It is recommended on Twin Cylinder Air Compressor Pumps that both cylinder sleeves and piston rings be replaced at the same time so that the air....
  • This K-0650 is the most current direct replacement part and has the newest style D25837 coated cylinder sleeve..
  • The K-0650 approximate cylinder dimensions are as follows: Inside Diameter:2.365" Outside Diameter:2.495" Outside Shoulder:2.945" Total Height:1.980".
  • Please check the compatibility before ordering.
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock

Runleader Digital Hour Meter Tachometer, Maintenance Reminder, Battery Replaceable, Automatically Shutdown, Use for ZTR Lawn Mower Tractor Generator Marine Snowmobile.

  • HOUR METER---- Accumulate total running hours TOT with 0.1/1 hour accuracy.
  • MAINTENANCE REMINDER----Countdown tracking service reminder time SVC.
  • Service warning icon flashes to remind when the maintenance time arrives.
  • TACHOMETER----Messuring and display RPMs (0-20000RPM) when the engine is running.
  • Suit for: 4 storke 4 cylinder / 2 storke 2 cylinder / 4 storke 2 cylinder/ 2 storke 1 cylinder / 4 storke 1 cylinder.
  • BATTERY REPLACEABLE---- Replaceable battery CR2450,data retained after battery change.
Check Stock

SAMDO Universal Motorcycle Speedometer Odometer Tachometer RPM Speedometer Gauge 199 Kph Mph for Carburetor Motor

  • 1--SAMDO Universal Speedometer Gauge fits for all carburetor motorcycles with DC 12V, SAMDO Motorcycle Tachometer adjustable for 8-22 inch wheel.
  • 2--ALL-IN-ONE Function: Universal Speedometer, Odometer, Tachometer, Fuel Level Display, Left and Right Indicator, N Gear, Battery, Water Temperature Indicator..
  • 3--SAMDO Digital speedometer Fits for all style motorcycle ,1 cylinder, 2 cylinder and 4 cylinder( 4 stroke motorcycle disc-brake front tire ).
  • 4--SAMDO SPEEDOMETER Shift Speed display in Kilometers or Miles, For Single cylinder and 2 cylinder motors, RPM cable connects trigger signal line positive pole . For 4 cylinder motors, RPM cable connects ignition coil input Line ..
  • 5-- Particular Attention-- SAMDO Motorcycle Gauges RPM does not compatible with Electric fule Injection (EFI) engine, if your motorbike is Electric fule Injection (EFI) engine, RPM function would not work properly, other functions run well.
Check Stock