Top 10 Threaded Fittings
Red Lion RL-SPRK150 115/230 Volt, 1.5 HP, 71 GPM Cast Iron Sprinkler/Irrigation Pump with Thermoplastic Impeller, Red, 97101501
- BUILT TO LAST: Rugged cast iron pump housing and glass-filled thermoplastic impeller for well water and lake water.
- pump is factory set at 230 Volts but can be easily switched to 115 Volts.
- always match the pump's voltage to the source voltage.
- ONE-TIME PRIMING: No additional priming is required after initial fill.
- follow the priming instructions in the owner's manual.
- UP TO 71 GPM at 10 PSI: 44 GPM at 30 PSI - can handle up to 14 sprinkler heads with 1/2-inch fittings or 7 sprinkler heads with 3/4-inch fittings in each zone.
- SPECIFICATIONS: 1.5 HP, 115/230 Volts, 2-inch Female NPT threaded intake.
- 1.5-inch Female NPT threaded discharge, Max pressure 44 PSI.
Check StockClass A Customs 25 Gallon Water Holding Tank NSF Approved T-2500
- 25 Gallon Capacity Fresh Drinking Water Safe Holding Tank Manufactured by Class A Customs – NSF FDA Approved & BPA FREE – Fresh & Drinking Water Safe.
- WATER TANK MEASUREMENTS: 33 1/2” Longest Length (not including fittings) x 10” x 17” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25″ on each measurement).
- BUILT-IN FITTING: (TWO) 1½ ” Dia screw in balloon fitting (threaded female – NPT Standard) fitting will be closed, to use remove inner membrane with razor knife (TWO) ½ ” Dia screw in fittings (threaded female – NPT Standard).
- NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish..
- Great extra water storage in RV, pop-up camper, off road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item here in the US in Elkhart, Indiana. NSF paperwork readily available and NSF logo molded into the tank..
Check Stock1\ Pipe Fitting Tee DN25 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1\)
- SIZE&QUANTITY: DN15 1/2-Inch pipe fittings compatible with standard 1/2-Inch pipe nipples. We send you 10 PCS pipe tees(size:1.37*1.12*1.79inch). It’s enough for you to DIY your furniture..
- MALLEABLE CAST IRON - High quality malleable cast iron is perfectly anti-rust in oil and gas. Durable and no flexibility cast iron always used in many industry buildings. But malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use...
- WIDE APPLICATION - You can use these pipe fittings to install a durable iron frame f or your pipe shelving, wall lamp or other home décor..
- EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the tees and elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
- 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our corner braces and we promise that you will not be disappointed..
Check Stock1/2\ Pipe Fitting Tee DN15 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1/2\)
- SIZE&QUANTITY: DN15 1/2-Inch pipe fittings compatible with standard 1/2-Inch pipe nipples. We send you 10 PCS pipe tees(size:1.37*1.12*1.79inch). It’s enough for you to DIY your furniture..
- MALLEABLE CAST IRON - High quality malleable cast iron is perfectly anti-rust in oil and gas. Durable and no flexibility cast iron always used in many industry buildings. But malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use...
- WIDE APPLICATION - You can use these pipe fittings to install a durable iron frame f or your pipe shelving, wall lamp or other home décor..
- EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the tees and elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
- 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our corner braces and we promise that you will not be disappointed..
Check StockClass A Customs | UM-1500 | One (1) UnderMount 15 Gallon RV Fresh and Gray Water Holding Tank RV Concession
- 15 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - NSF CSA Approved - Fresh & Drinking Water Safe - BPA FREE.
- WATER TANK MEASUREMENTS: 36 Longest Length (not including fittings) x 8.5 height x 13 width Average thickness 7/32 +/- (+/- .25" on each measurement) Designed to fit between the cross members of trailers.
- TANK BUILT-IN FITTINGS: 2 (Two) 1 " Dia screw in balloon fittings (threaded female - NPT Standard) fitting will be closed, to use remove inner membrane with razor knife 2 (Two) " Dia screw in fittings (threaded female - NPT Standard).
- NON-PRESSURIZED TANK: you will need to vent this tank to use it, letting air in and out during use. Do NOT hook garden hose to tank use a fill dish..
Check StockLegines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)
- Long nipple for connecting two threaded pipes and extending pipe length.
- 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check StockCamco 39659 Super Kit RV Sewer Hose Kit - 20' , Gray
- SUPER kit includes two 10' 18mil super heavy-duty HTS vinyl sewer hoses with pre-attached swivel fittings.
- Fittings swivel 360 degrees for easy connecting and disconnecting.
- Included 4-in-1 adapter is compatible with 3-inch slip or 3-inch, 3-1/2-inch and 4-inch NPT threaded sewer connection.
- Easily stores in 4-inch square bumpers when 4-in-1 adapter is removed.
- Includes a bonus clear extender so you can see when your tank is empty, plus two bayonet and two lug end caps for storage.
Check StockEbb and Flow Hydroponics Control System Parts, Extra Riser, 10 Pack, Flood and Drain Irrigation Kit, Tools and Fittings, 388500
- EBB AND FLOW EXTRA RISER– Ebb and Flow Extra Riser Fittings, an essential part of your hydroponics supplies. Use as repair, replacement, or spare parts for your irrigation system..
- INCLUDES – Extra Riser, 10 Pack. Threaded hydroponic watering system parts..
- FOR IRRIGATION SYSTEMS – Ideal for use with reservoir and flood table irrigation setups for maximum functionality and efficiency. (Additional fittings may also be purchased separately)..
- DURABLE – Automatic irrigation equipment parts made from heavy-duty and durable plastic that’s designed to last longer than other fittings and offer great value for money..
Check StockCar Shift Knob Head, Universal Two-Color Crystal Bubble Shift Gear Knob Manual Gear Stick Lever Head with 8mm 10mm Thread (Blue Purple)
- Fitment: With reliable performance, 100% brand new condition and 2 mounting adapters, gear lever head is suitable for most manual vehicles. Please check your parts with the pictures before purchasing an item..
- Premium Acrylic Material: Car shift knob head is made of high quality acrylic material, which is durable to use. It can improve your driving comfort and interior appearance..
- Easy to Install: Direct installation, gear knob is very easy and fast in practical use. It's exquisite design, unique appearance and nice decorations for your car..
- Shifter Lever Head: Optional Color: Blue purple, green brown.
- Size: Approx.15x4x3.3cm/5.91x1.57x1.30in.
- Threaded Fittings: 8mm/0.31in, 10mm/0.39in.
- Package List: 1 x Gear Shift Knob, 2 x Threaded Fittings (8mm, 10mm)..
- Service Guarantee: When you receive or use the goods, please check it again, if you meet any problems or dissatisfaction about the item, please fell free to contact our customer service and our Dweekiy team will reply within 24hrs. You can buy it with no worry..
Check StockEbb and Flow Hydroponics Control System Parts, Screen, 10 Pack, Flood and Drain Irrigation Kit, Tools and Fittings, 388505
- EBB AND FLOW SCREEN– Ebb and Flow Screen Fittings, an essential part of your hydroponics supplies. Use as repair, replacement, or spare parts for your irrigation system..
- INCLUDES – Screen Ebb and Flow Fitting, 10 Pack. Threaded hydroponic watering system parts..
- FOR IRRIGATION SYSTEMS – Ideal for use with reservoir and flood table irrigation setups for maximum functionality and efficiency. (Additional fittings may also be purchased separately)..
- DURABLE – Automatic irrigation equipment parts made from heavy-duty and durable plastic that’s designed to last longer than other fittings and offer great value for money..
- DELIVERS OXYGEN TO ROOTS – With higher oxygen levels in the root zone you will see improved growth from your plants and increased nutrient uptake, allowing you to maximize your yields..
Check StockGASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT
- Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
- Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
- Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
- These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check StockCamco 20' (39742) RhinoFLEX 20-Foot RV Sewer Hose Kit, Swivel Transparent Elbow with 4-in-1 Dump Station Fitting-Storage Caps Included , Black , Brown
- Set Includes: RV sewer hose kit comes with two 10-foot RhinoFLEX sewer hoses with pre-attached swivel bayonet and lug fittings, transparent elbow with 4-in-1 adapter, and four storage caps.
- Durable Construction: RV sewer hose is made of 23 mils of durable polyolefin and reinforced with steel wire.
- Compatible With: RV sewer hose extension fits a variety of dump station pipes.
- transparent elbow connects to the 4-in-1 adapter, which fits a 3-inch slip or 3, 3-1/2, and 4-inch threaded dump station pipes.
- Easy to Store: Each 10-foot section compresses to 39 inches with fittings for storage.
- a removable 4-in-1 adapter allows you to store the hose in 4-inch square bumpers.
- Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.
Check Stock