Top 100mm Nozzle

CloroxPro Turbo Pro Electrostatic Sprayer, Healthcare and Industrial Spray, Clorox Disinfectant Spray - 29561

  • Cordless hand sprayer, with shoulder strap. Powered by dependable rechargeable Panasonic Lithium battery (UL listed). Additional batteries available as well, for quick swaps during the day. Wall charger included..
  • The VF-ES200holds 1/2 gallons of solution or approximately 2.2 Liters. Fog Nozzle size: 0.5 mm. Fogging Nozzle: 50 micron (5,600 sq.ft per gallon). Adjustable Spray Nozzle size: 100 to 500 micron..
  • Set of Replacement Accessories are provided with each unit, to ensure no down time in case an issue arises. No waiting on parts to get back up and running!.
  • 1 year warranty against manufacturing defects. Replacement parts available and in stock..
  • Electrostatic application device for Clorox Total 360, KlorKleen, Vital Oxide, hypochlorous acid and other disinfecting solutions..
Check Stock

Rock&Rocker Paint Sprayer, Paint Sprayers for Home Interior and Exterior 1400ML with Cleaning & Blowing Functions, 550W, 4 Nozzles, 3 Patterns for Home Exterior, Interior, Fence, Wall, DIY Works

  • 【Unique Blowing & Cleaning Functions As A Bonus】Rock&Rocker paint sprayer contains two unique attachments. Blowing joints allows you to blow and clean the surface before spraying. Cleaning joints allows you to connect the paint sprayer with your home tap, which is easier and more efficient to wash the nozzle and container after use..
  • 【3 Spray Patterns＆4 Nozzle Sizes】This Rock&Rocker paint sprayer features with 4 nozzle sizes(1.5mm/1.8mm/2.2 mm/2.6mm). The 1.5mm &1.8mm nozzles are for thin paint like sealers and varnish, while the 2.2mm&2.6mm are for latex paint, chalk type paint, etc. 3 different spray patterns (vertical/ horizontal/ circular) can be chosen in different spray needs. What's more, you can control the flow and paint thickness by rotating the knob, which can help saving paints in different tasks..
  • 【550W Powerful Motor & Anti-flow System】This paint sprayers for home interior and exterior features a 550W powerful motor, which can provide a precise spray pattern to create a smooth and superior finish. The anti-backflow system can well protect the motor from damage by paints when you try to spray the ceiling. 1400ml large capacity detachable container is ideal to save your time on refilling again and again..
Check Stock

SpringSpray 1-1/2\ NST/NH Fire Hose Nozzle Spray Polycarbonate Jet Fog Industrial Fireman 1.5\ Nozzle 75 gpm Fire Equipment

  • ✅ EXACT SIZE - 1-1/2" (38 mm) adjustable fog nozzle. Female 1-1/2" NH/NST will only connect to a male 1-1/2" NH/NST. IDM of 1.5" NST/NH nozzle is 1.8585" and conforms to NFPA 1963 Standard for Fire Hose Connections 2014 Edition. If you need 1-1/2" NPSH nozzle, this 1-1/2" NH/NST nozzle will be too big for your hose. Please check the thread of your hose before order.
  • ✅ MULTIPURPOSE APPLICATION - Recommended for fire hose and fire hose racks for lined or unlined fire hose. This fire nozzle is for attaching to a fire hose and for extinguishing fires. This spray nozzle is for fire fighter fireman station, also could be for green house applications, dust suppression, and evaporate cooling.
  • ✅ PREMIUM MATERIAL - Polycarbonate housing for resistance to high temperature and impact. Brass stem for resistance to corrosion.
  • ✅ EASY TO CONTROL - By rotating to control on and off and adjust spray size, adjusts from straight stream to fog for multipurpose use. Industrial constant flow fog nozzle. Approximate gallons per minute (GPM) - 75. Maximum 100 psi pressure (water only). Provides consistent volume at any spray angle. Capable of complete shutoff, straight stream or any degree of conical fog.
  • 100% SATISFACTION SERVICE - We have a professional fire nozzles de....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • Nozzle Cleaning Kit: you will get 32 ​​MK8 nozzles (including 4 hardened steel nozzles, 11 stainless steel nozzles and 17 brass nozzles), 5 nozzle cleaning needles (0.15mm), 5 cleaning brushes (0.15mm), 1 nozzle wrench, 1 L shaped socket wrench and 2 tweezers, sufficient quantity for you to conveniently replace it in time and achieve quality printing.
  • And the input diameters of nozzles are 0.2 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm and 1.0 mm.
  • Wide Compatibility of 3D Printer Extruder Cleaning Kit: MK8 extruder nozzle is suitable for 3D printer Makerbot, CR-10, MK8 and RepRap, Ender 3, Ender 2, Prusa I3, Prusa 3 and other 1.75 mm PLA ABS 3D printers.
  • Reliable Material: the mk8 nozzle set is made of quality hardened steel, brass and stainless steel, strong and reliable, with higher hardness and rust resistance, wear resistance, heat resistance, easy to install and replace, serving you for a long life.
  • Useful Nozzle Wrench 3D Printer Kit: the 0.15mm nozzle cleaning needle is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the h....
Check Stock

M MINGLE Foam Cannon Orifice Nozzle Tips and Foam Maker Universal 1.1 mm Thread Nozzle and Mesh Filter for Snow Foam Lance 3000 PSI

  • ATTENTION: Please screw in the orifice nozzle tighten enough, or it is hard to get thick foam..
  • Include 1 piece of foam maker (mesh filter) and 1 piece of orifice nozzle tips (foam generator nozzle). They assembly inside foam cannon for foam....
  • If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and....
  • FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch.
  • foam creator made of stainless steel, work durably in the foam sprayer.
  • ORIFICE NOZZLE TIPS: NPT male screw nozzles, about 0.28 inch, Orifice Size 1.1 mm. Made of brass, work durably in the foam lance. Max. Pressure: 3000....
Check Stock

4 Pcs Soldering Nozzles for Hot Air Gun SMD Rework Station 853d 862d Replacement

  • [Great Compatibility]: 4 Pieces of hot air gun nozzles include 3 round nozzles of 5mm, 8mm and 10mm and 1 square nozzle of 13mm, compatible for 853D, 878D soldering station and other hot air guns, applicable to our soldering station models: YES0367, YES0368, YES0369, YES0370, YES0371, YES0372, YES0373, YES0374, YES0375, any inquiry is welcome.
  • [Practical Usage]: Nozzles of different size and shape are ideal for regulating the hot wind size and shape to heat different kinds of electronic components, 24mm diameter nozzle interface adapts to many hot air guns, easy to be installed.
  • [Useful Lock Screw]: With lock screw for locking the nozzle firmly to avoid hot air flow out from the gap between the nozzle and the heat gun air outlet steel pipe, and reduce temperature irregularity.
  • [Durable Material]: Sturdy and durable metal material not easy to rust and damage, suitable for long time use.
  • [Soldering Nozzle Size]: 3 Round nozzles sizes are 5mm, 8mm, 10mm.
Check Stock

BIGTREETECH Direct Metal Hotend with MK8 Nozzle CR10 Extruder Heatsink for CR10 Ender 3 Upgraded 3D Printer Parts

  • ⭐【Item Name】: All Metal MK8 Hotend CR10 Extruder Conversion Kit compatible with Creality Printers..
  • ⭐【CR10 Heatsink Hotend】: Strong and durable, imported aluminum quality, efficient heat transfer,Compatible with CR10S, Ender 3 Series and BIQU....
  • ⭐【Package Including】: 2 * 4mm PTFE Tube.
  • Compatible with 100K NTC 3950 thermistors.
  • Uses MK8 Nozzle and 6 * 20mm Heater Cartridge..
  • ⭐【Warm Notice】When replace the honted, should preheat the honted, setting the nozzle to 234°..
  • ⭐【Technical Support】If you have any question, please feel free to QA or tell us through Amazon, we will get back to you within 24h..
Check Stock

Weldy 1600W Professional Hot Air Equipment Hot Blast Torch Overlap Air Welding Gun Welder Pistol Tool Hot Air Gun 120 Voltage and flat nozzle

  • WELDY energy HT1600 is a compact and robust hot air hand tool for an endless range of professional applications. This hot-air-tool convinces with its....
  • Accessories:Wide slot nozzle 20 mm,Wide slot nozzle 40 mm,Silicone pressure roller 40 mm.
  • (Weldy AG Switzerland) All Weldy products are manufactured according to Swiss technology and engineering and its proximity to the key markets is a....
  • One year warranty (not include heat element). Operation Notice:Knob the temperature to zero point after use,cold airing a few minutes to cool down....
  • Industry standard and reliable ,Adjustable hot air from 100f-1290f / 40 °C to 700 °C ,Long lifetime ,Heating tube protection for more security.
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

16 Pieces 3D Printer Nozzle Wrench Cleaning Kit,10 Nozzle Cleaning Pins with Storage Box 2 Tweezers 2 Cleaning Copper Wire Brushes 2 L-Shaped Wrench Tool for 3D Printer Accessories

  • 3D printer nozzle cleaning kit: you will get 10 pieces stainless steel nozzle cleaning pins in 5 sizes, 2 pieces cleaning copper wire brushes in....
  • Nozzle cleaning pins: there are 5 different sizes, including 0.15 mm, 0.25 mm, 0.35 mm, 0.4 mm and 0.5 mm, allowing you to choose according to your....
  • Cleaning copper wire brush: the brush is suitable for 3D printer nozzle hot bed cleaning and rust removal.
  • When you use 3D printer nozzle brush to....
  • Wrench and tweezer: 6 mm 7 mm L-shaped hexagonal wrench tool can be applied for fastening nozzles, and 6 mm wrench is compatible with mk8 nozzle.
  • Quality material: cleaning pins are made of stainless steel, and wire brushes are made of copper wire, sturdy and flexible, not easy to break and....
Check Stock

Onyehn 22pcs/Lots A8&A2 3D Printer Part Each 5PCS 0.4mm Extruder Nozzle Print Head+1.75mm Teflon Throat Tube+Heater Blocks Hotend for MK8 Makerbot Reprap

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quantity:22pcs/lot (5x 3D Printer Nozzle Throat Tube 5x Nozzle Print Heads 5x Heater Blocks Hotend 5x M6 nuts 2x Hex Key Wrenches (for MK8 Makerbot....
Check Stock

110V 1600W Professional PVC Roofing Welding Tools Heat Gun Kit Plastic Welder Hot Air Weld Gun with Roofing Seam Rollers Seam Tester Probe Weld Nozzle  (Hot gun)

  • 1pcs x Seam tester probe, plastic handle.
  • 1pcs x 10" (250mm) Heavy duty roofing scissors.
  • 1pcs x 5mm Round weld nozzle 1pcs x 5mm Round speed weld nozzle.
  • [Warranty]: One year warranty, not include the heat element..
Check Stock