Top 10mm Drill

K Kwokker 15Pcs Masonry Drill Bit Set 5/8\ to 1/8\

  • ☺[15 Pcs 16mm to 3mm (5/8" to 1/8") Masonry Drill Bits, More Quantity, More Size] Masonry drill bit set with case. Easy to store and take. 16mm 14mm 12mm 10mm 8mm 6mm 5mm 4mm 3mm (5/8" 9/16" 1/2" 3/8" 5/16" 1/4" 3/16" 5/32" 1/8"). There are multiple 9 sizes that will help in drilling by starting with the smallest bit and continuing to the size needed. To meet your more needs..
  • ☺[Ceramic Drill with Cemented Carbide Tip, Hardness is Higher Than Ordinary Drill, More Wear Resistance] Excellent tile drill bits with nice point, make the drilling much more easier, less effort and work with a minimum of pressure. Like a hot knife thru butter! WATER IS THE KEY TO GETTING DRILL BITS TO LAST. PLEASE COOLING WITH WATER AND CONTROL THE SPEED WHEN DRILLING..
  • ☺[Widely Used Range, a Good Beginning is Half Done, Carbide Drill Bits Perfect For] masonry, title, glass, wood, plastic, ceramic, terracotta, brick, stucco, brick, cinder block, steel, laminate flooring, garden pot, marble, pickguard, mirrors, windows, etc. PLEASE NOTE THAT FOR DIFFERENT SIZES, IT IS RECOMMENDED TO USE DIFFERENT DRILLING SPEEDS TO PREVENT DRILL BIT DAMAGE CAUSED BY WRONG DRILLING SPEEDS..
  • ☺[1 x K Kwokker Ceramic Drill Bit Replaces Two Drill Bits (1 x Glass & Tile Drill bit + 1 x Masonry ....
Check Stock

amoolo Countersink Drill Bits Set 7Pcs, Counter Sink Drill Bit for Wood, Woodworking High Carbon Steel Carpentry Bit with Chamfering Combination Pedestal, 1 Free Hex Key Wrench Attached

  • 【IDEAL COMBO SET】 A set of 7 countersink drill bits with 7 drill size, φ7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm), 9/32”(7mm), 5/16”(8mm) combine with 19/32”(15mm) countersink pedestal, 13/32"(10mm) combine with φ45/64"(18mm) countersink pedestal. A 1/10"(2.5mm) free hex key wrench. Come with a portable plastic case for easy select, storage and organization..
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects..
  • 【EFFICIENT DESIGN】3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling.
  • 2-spiral flute makes chip removing easy and efficient.
  • 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness..
  • 【MULTIPLE APPLICATION】 Perfect for Wooden planks, Fiberboard, Particle board, Plywood, Plastic, PVC and soft metals. Suitable for hand drill, bench drill and electric drill. The drilling depth of countersink drill bits are adjustable by screws with various lengths.
  • Meanwhile, their bits are removable for easy cleaning, sharp....
Check Stock

MAEXUS Hand Drill Bits Set, Pin Vise Hand Drill, Mini Micro Drill and Twist Drills for Jewelry Making, Pin Vise Woodworking Hand Mini Drill for Model Resin Jewelry Walnut Amber Beeswax Olive (36 Pcs)

  • 【Various Functionse】Drill set Includes 1 * hand drill, 25 * twist drill bits, 10 * PCB mini drills. Hand Drill and twist drills are made of high-speed steel, PCB mini drills made of tungsten carbide, offer superior performance and are easy to use..
  • 【Ingenious Design】Pen-shaped hand drills for ease of carrying and storage. Precisely designed chuck to keep that drill upright, Ability to easily rotate vice head to adjust the clamp for different size drill bits..
  • 【10 Pcs Colorful Mini drills】10 sizes: 0.1-1 mm, PCB mini drills the average of 38 mm in length, professionally designed for processing PCB, SMT, CNC, circuit boards, carbon fibre, composite boards, common FR-4, CEM-3 boards, etc..
  • 【Extremely Versatile】25 Pcs Twist drill bits have 12 different sizes to satisfied your different demand: 0.5mm / 0.6mm / 1.0mm / 1.2mm / 1.5mm / 1.8mm / 2.0mm / 2.35mm / 3.0mm, is perfect for drilling a small hole on wood, plastic, rubber, walnut, model, bones, horns, amber, olives, and other materials, jewelry, plastic, and many other DIY projects..
Check Stock

amoolo 10-Pack Countersink Drill Bit Set with 1 Free Hex Key Wrench, 7 Pcs High Carbon Steel Countersink Drill Bits for Wood, 3 Pcs Hex Shank Wood Countersink Bits (1/2\ 5/8\ 3/4\), Woodworking Carpentry Reamer

  • 【IDEAL COMBO SET】7 countersink drill bits size of Ø7/64”(3mm), 5/32”(4mm), 13/64”(5mm), 1/4”(6mm), 9/32”(7mm), 5/16”(8mm) combine with Ø19/32”(15mm) countersink pedestal, 13/32”(10mm) combine with Ø45/64” countersink pedestal. 3 countersink bits with most commonly-used sizes of Ø12mm(1/2"), 16mm(5/8"), 19mm(3/4") A 1/10”(2.5mm) Free Hex Key Wrench Plus. Come with a portable plastic case for easy convenient select, storage and organization..
  • 【PREMIUM QUALITY】Made with industrial grade high-carbon steel, great hardness provides sharp edges, high strength takes bits with superior cutting capactiy and durability. Ideal for household woodworking and DIY Projects..
  • 【EFFICIENT DESIGN】For 7 countersink drill bits, 3-point tricuspid ensures drill process accurate and fast, no offset, slip and bias during drilling.
  • 2-spiral flute makes chip removing easy and efficient. For 3 countersink bits, 90°on the point & 1/4" hex shank for quick change make the countersink process convenient. All drill bits get 5-edged chatter-free chamfer cutter pedestal design makes countersink precise and smooth. All cutting edge are well hardened and honed for sharpness..
  • 【REMOVABLE& ADJUSTABLE】Perfect for Wooden planks, Fiberboard, Particle boar....
Check Stock

HOHXEN 3 Packs Spiral Step Drill Bit Set with 4-12mm/4-20mm/ 4-32mm, Total 32 Sizes, 1/4\ Hex Shank Cone Titanium Coated High Speed Steel, Multi-Functional Industrial DIY Metalworking tools

  • 3 standard SAE Spiral step drill bits can drill 32 different size of holes on different thickness of materials.The 3 Cutters Come in the Following Sizes: 4-12mm: 4mm,6mm,8mm,10mm,12mm.
  • 4-20mm: 4mm,6mm,8mm,10mm,12mm,14mm,16mm,18mm,20mm.
  • 4-32mm: 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 24mm, 26mm, 28mm, 30mm, 32mm..
  • Made with drop forged heat treated high speed steel (HSS) with titanium nitride coating for longer life time..
  • 4241 high-speed steel, used in hardness under 25 ¡ã workpiece, the plate thickness under 5 mm..
  • 1/4" round shank (6.35mm)can be easily fit into power driver, drill and press drill. Two-flute design provides faster, smoother cutting without walking and a tri-flat shank ensure a firm grip..
  • Comes with 3Pcs 1/4 Inch round Shank HSS Titanium Coated Step Drill Bit Set - 4-12/4-20/4-32mm With Pouch.Suitable for punch holes through sheet metal, iron plate, aluminum plate, brass, wood, plastic, etc..
Check Stock

Diamond Drill Bit Set,10 Pieces Diamond Hole Saw, Glass Hole Saw for Tiles Glass, Ceramic, Porcelain, Marble, Bottles, DIY,6mm - 30mm

  • ...ality and performance, this diamond bit is perfect for making clean and accurate holes, making it your best choice..
  • Versatile: This diamond coated bit can remove a full circle from glass, ceramic, porcelain, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass or other materials..
  • Applicable drill models: Can be used with three-claw/round shank ordinary bench drill, hand electric drill or rechargeable drill(not included), as long as the tool chuck can be adjusted to 6-10MM are available. Note: Not suitable for electric hammer, electric pick electric grinding pen.Water is required for lubrication when drilling, otherwise the diamond coring drill will burn. WARNING: Not for use with concrete or depths greater than approximately 1/2"..
  • 10 sizes:No markings for size on the item.There are 10 different sizes (6 mm, 8 mm, 10 mm, 12 mm, 14 mm, 16 mm, 18 mm, 20 mm, 22 mm, 30 mm), different sizes to meet your different needs and help you in different places..
Check Stock

Kyoffiie Diamond Drill Bits, 16Pcs Diamond Hole Saw Set with 10Pcs Tile Hole Saw Set & Adjustable Hole Saw Guide Jig Fixture 6mm-50mm for Glass, Porcelain, Ceramic, Marble, Tile, Granite

  • 【Premium Material】- These hollow drill hole saw set are made of high speed steel and have a nickel-plated coating to resist corrosion. The thickened diamond coating on the top provides excellent cutting strength for high-precision, smooth cuts without hemming for maximum drilling results..
  • 【Multiple Sizes】- 10 Sizes tile drill bits to meet various needs. Including 6mm, 8mm, 10mm, 12mm, 20mm, 25mm, 30mm, 35mm, 40mm, 50mm, diameter of triangle bit: 6mm, 8mm, 10mm, 12mm. Set include 10 holes saw drill bits+1 hole saw guide clamp+1 screwdriver driver + 4 triangle bit..
  • 【Ergonomic Design】- The large clearance holes along the drill bit help the entry of cooling water and the escape of chips and other particles from the borehole, ensuring smooth punching and making the drilling process easier. When debris gets stuck in the small hole saw. We can use our screwdriver to pull it out. Ceramic drill bit to provide you with the perfect experience..
  • 【Adjustable Fixture】- Adjustable hole saw drilling guide fixture with suction cup-the maximum opening length of the board is 3-1 / 4.
Check Stock

Knakasaki 28PCS 2 in 1 Corded Impact Drill and Hammer Drill High Powerful Blue

  • ?Hammer & Impact 2 in 1?-KNakasaki Hammer drill has the function of combining hammer and drill, according to different tasks, the top button can be easily switched to select the hammer &drill function. Hammer function for drilling on the wall and drill function for drilling holes on steel plates and wood. This hammer drill would be your excellent helper. At the same time, it is also your best choice for gifts.
  • ?Lock Speed Button &17 Precise Speeds Control?-Lock button of KNakasaki impact drill enables you to lock the speed without a constant grip on the trigger to reduce fatigue. KNakasaki hammer drill has variable speed switch with 17dials knob allowing free speed adjustment, you can screwed with low gear and drill with high gear..
  • ?13 MM Keyed Chuck, 360 degree rotating Handle & Depth Gauge?-Its keyed chuck is suitable for drill bits with diameter (=13mm) to meet your requirements for different drill bits. Anti-skid auxiliary handle can rotate 360 degrees, offering greater control, precision, making drilling comfortable and convenient.
  • Thoughtful depth gauge makes your drilling more accurate..
  • ?Powerful & High-Performance?-KNakasaki hammer drill has copper powerful motor (820W), providing 30 percent more power to easily drill.
Check Stock

Magnetic Hex Nut Driver Kit, YSJOYTOOL 33-Piece Power Nut Driver Bit Set for Impact Drill with Drill Bit Extension & Adapter, 1/4" Quick-Change Hex Shank | SAE & Metric | Cr-V Steel

  • Magnetic Power Nuts Driver Drill Bit Tools Set.
  • METRIC: 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm..
  • SAE: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"..
  • Drill Bit Adapter: 1/4″, 3/8″, 1/2″ & Drill Bit Extension: 60mm, 100mm, 150mm & Mni Ratchet Wrench.
Check Stock

30Pcs Diamond Drill Bits Glass Hole Saw Drill Bit Set Cutting Remover Tools for Glass Porcelain Tile Ceramic Marble Granite Bottles DIY(6mm-50mm)

  • [Scope of application]:Diamond Hole Saw bits are versatile drill bits that allow you to cleanly cut glass, ceramics, porcelain, ceramic tile, porcelain tile, limestone, slate, marble, granite, light stone and fiberglass. It is important to note that you must keep your drill bit wet as the friction of the bits and materials build up heat quickly.
  • [Diameter Range]: 16 different drill bits included with this glass drill bit set to meet various demands. Includes the following diameters: 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 25mm, 28mm, 30mm, 35mm, 40mm, 45mm,50mm, 16pcs hole saw drills + 14pcs 6mm Hole opener.
  • [Supreme Quality]: These diamond drill bits are made of industrial grade carbon steel with nickel-plated coated body to resist corrosion. A thicken diamond coating on the tops offers superior cutting strength for maximum drilling outcomes.
  • [Applicable Method]:1,Install the drill bit on a drill such as a hand drill.2,Since the hole opener does not have a central positioning bit, the hole is tilted at 45 degrees during operation, the speed of the drill is slowed down, and the glass and the stone are slowly contacted.3,When a glass or stone appears in a crescent (the crescent is positioned), then the vertical drill begins to work..
Check Stock

Tysun Self Centering Dowelling Jig, 6/8/10mm Wood Dowel Hole Drilling Guide Woodworking Positioner Locator Tool

  • ★【High Precision】The joinery punch locator provides improved version comes with 6mm, 8mm and 10mm bushings and 1mm and 2mm scoring hole for making different sizes of holes..
  • ★【Applicable Wood Board】Suitable for clamping 17-60mm wood board with clear positioning scale, metric locating pin drilling tool, no need to measure, no need for cumbersome test and error adjustment..
  • ★【Fast and Accurate】The arms of the jig are an always reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig’s center bar with the dowel location mark on your board, hold the jig and drill..
  • ★【Convenient and Practical】With the practical joinery punch locator, you can more conveniently work for woodworking. It is a great set tool for both furniture factory and woodworking enthusiasts..
  • ★【Package Includes】1 x Self Centering Dowelling Jig, 3 x Dowel Pin (1 each for 6mm, 8mm, 10mm), 9 x Drill Sleeve (3 x 6mm, 8mm, 10mm each), 3 x Drill Bit (6mm, 8mm, 10mm), 3 x Stopper (6mm, 8mm, 10mm), 1 x Hex Wrench..
Check Stock

Swpeet 13Pcs Tile Hole Saw Set, Including 10Pcs 0.23-3.15 inch Diamond Drill Bits with Hole Saw Guide Jig Fixture and 2Pcs Marking Pen Adjustable Hole Saw Centering Locator Suction Holder for Tile

  • 1, 【10 Different Sizes Diamond Hole Saw】: In this kit, We have prepared 10 sizes for you. Including 6mm, 14mm, 22mm, 26mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, These are made of high strength carbon steel makes these diamond drill bits durable..
  • 2, 【 High Quality Drill 】: Each hole is treated with smooth and accurate surface treatment,and the top oh the hole is thickened to achieve excellent cutting strength..
  • 3, 【 With Adjustable Hole Saw Guide Jig Fixture and Marking Pen】: Adjustable hole saw drill guide jig fixture with suction base.Plates' maximum opening length is 3-1/4", large enough to put in all sizes' hole saws. These marking pens glide on easily, can work well on most clothes, suitable for dress marking, handicraft, shoe marking, embroidery, cross stitch and so on..
  • 4, 【 Power Function】: Removable ball bearings, 2 Modes (3 or 4 bearings fixing ) are optional for you, just flip the plate.Guide hole saw or drill bit to drill clear holes on tile, glass, marble, countertop, granite, etc..
  • 5,【Attention】: Please keep adding water when the diamond drill bits are working on the glass or ceramics.low drill pressure and increased use of water lubrication will extend drill bit life..
Check Stock