Top 110mm Stepper Motor

Nema 23 Stepper Motor 4.2A 3.0Nm (425oz.in) 100mm Length with 8mm Shaft for CNC Mill Lathe Router

  • The most powerful Nema 23 stepper motor available. Ideal for CNC Mill Lathe Router..
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

Iverntech NEMA 17 Stepper Motor with Integrated Tr8x2 2mm Lead 310mm T8 Lead Screw for 3D Printers Z Axis or CNC Machine…

  • Iverntech NEMA 17 Stepper Motor with Integrated 310mm Tr8x2 Lead Screw.
  • High torque nema 17 stepper motor, 500mN.m, 42x42x48mm, 2 phase 4 wires.
  • Come with 1 set anti backlash nut and 1M (39.37") motor wire.
  • Great replacement for 3D Printers Z Axis, CNC Milling, Small Robotics, Stage Lighting, Laser Engraving.
Check Stock

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

  • 【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion..
  • 【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver)..
  • 【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value)..
  • 【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down..
  • 【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc..
Check Stock

4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router

  • ♞【Product】4 Axis nema23 stepper motor driver usbcnc controller kit.
  • Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue.
  • ♞【Driver】FMD2740C driver Voltage: DC12-50V.
  • Current: rated maximum output reaches: 4A.
  • Subdivision precision 2 8 16 32 64 128 10 20 optional.
  • ♞【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software.
  • ♞【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V.
  • 【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it..
Check Stock

INTLLAB High Flow Corrosion Resistant Vacuum Peristaltic Self-Priming Pump with Stepper Motor 12V/24V High Flow Peristaltic Pump, DP-520-48S

  • Volts:DC 24V，Flow rate:110 mL/min，Speed:350rpm,Pharmed BPT tube：3.2mm ID × 6.4mm OD.Working temperature: 0~40℃，Relative humidity 003c80%，Rotor:3 rotors..
  • Suitable for the transmission of viscous and non-viscous liquids, stepping motor, high precision..
  • Pump tube material: Pharmed BPT tube，tube service life＞1000H.It has very good chemical resistance.Operating temperature range -51℃~132℃..
  • Note: The stepper motor needs to be used with the control board, and the speed control can be carried out through the control board..
  • Application: accessories for Filling packaging，Experiment，Laboratory，research institutes，Food and beverage..
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

Eiechip® CNC 3D Printer Kit for Arduino Mega 2560 R3 + RAMPS 1.4 Controller + LCD 2004 + 6X Limit Switch Endstop + 5 A4988 Stepper Driver 3D Printer Interface & Driver Modules

  • 3D Printer Accessories Set meets most needs. Including CNC Shield V3.0, UNO R3 Board, A4988 StepStick Stepper Motor Module..
  • The 3D printer stepper motor shield V3 can be used as driver expansion board for engraving machines and 3D printers..
  • It has in total 4 channel slots for A4988 stepper motor driver modules for driving 4 channel of stepper motors..
  • Each channel of stepper motor only needs 2 IO ports, which means 8 IO ports is sufficient to manage 3 stepper motors..
  • This shield can make quick work for managing stepper motors in your project..
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock

3D Printer Heatsink Kit + Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling TMC2130 TMC2100 A4988 DRV8825 TMC2208 Stepper Motor Driver Module (22pcs)

  • Can be applied for passive cooling of Stepper Motor Module TMC2130 TMC2100 A4988 DRV8825 TMC2208.
  • With thermal conductive adhesive tape backing.
  • Stepper motor driver module is not included.
  • Dimension: 0.35 x 0.35 x 0.47 inch / 9mm x 9mm x 12mm (L*W*H), Weight: 0.04 oz / 1 gr per piece.
  • Includes 22 pieces blue aluminum heatsink.
Check Stock

Doesbot CNC Z-Axis Sliding Table 3018 Engraving Machine Upgrade DIY Metal Kits

  • Stepper motor: Apply to Nema17 42BYG Stepper.
  • Screw: T8 stainless steel screw, lead 8MM, copper anti-backlash nut.
Check Stock

K11-100mm CNC Router 4th Axis Rotational Axis A axis 100mm 3 Jaw Chuck Rotary Table Dividing Head Reducing ratio 6:1 with 65mm Tailstock for CNC Milling Engraving Machine

  • Stepper motor: Nema23 2-phase 57 stepper motor.
  • Reducing ratio: 6:1(belt deceleration mode).
  • Accessories: Set of Anti-claw and wrenches.
Check Stock