Top 12 Dc Gear Motor

Traxxas 1/10 Slash, 2WD, RTR (Includes Battery & Charger): PinkX

  • Traxxas 58034-1 - Slash XL-5 Brushed 1/10 2WD SCT RTR, w/ iD Battery, Pink.
  • Features: Titan 12-Turn 550 modified motor XL-5 waterproof electronic speed control Water-sealed receiver box and steering servo Metal gear Magnum 272 transmission Torque-Control slipper clutch 30+mph top speed Adjustable steel turnbuckles with captured rod ends The tires are mounted on satin-finish 2.2" Slash wheels Included optional 23-tooth pinion gear Traxxas 4-amp DC Peak Detecting Fast Charger Traxxas Power Cell NiMH Battery with iDTM Avai.
  • Includes: (1) Slash Short Course Race Truck (1) TQ 2.4GHz Radio System (1) ESC,(1) Body (1) Motor (1) 7-Cell 3000mAh NiMH Battery (1) 4-Amp DC iD Car Charger Illustrated Instruction Manual Decals.
  • Specs: Vehicle Dimensions: Length: 22.36" (568mm) Width: 11.65" (296mm) Height: 8.42" (214mm) Front and Rear Track: 11.65" (296mm) Distance Between Outer Edges of Wheels Wheelbase: 13.2" (335mm) Ground Clearance: 3.5" (89mm) Weight: 76.2oz (2.16kg) Body Dimensions: Length: 21.3" (542mm) Width: 11.4" (289mm) Height: 5.3" (135mm) Height: 5.3" (135mm).
  • Part number(s) included (in factory packaging): 58034-1.
Check Stock

Champion Fullfillment CMF13005 Champion Power Winch Kit (3,000 lb)

  • Galvanized super-duty aircraft cable (45.9 feet x 3/16 inch).
Check Stock

CHANCS TYZ42 Synchronous Motor TYC-40 AC 12V 5RPM Shaft Length 46MM for Fiber Optic Christmas Ornament …

  • This is a TYC-40 AC 12V 5RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Speed: 5RPM； Shaft Diameter: 4.5mm ； Shaft Length: 46mm； Shaft Screw....
  • 【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
  • 【Package Content:】1PC x Synchronous Motor.
Check Stock

uxcell DC 12V 350RPM Encoder Gear Motor with Mounting Bracket 65mm Wheel Kit for Smart Robot DIY

  • Motor Size: 25mm x 70mm/ 0.98in x 2.77in(D*L).
  • Wheel Size: 65mm x 26mm/ 2.56in x 1.03in(D*T).
  • Great replacement for self-balancing smart robot..
  • This kit is made for beginners to teach them about programming, electronics and robotics..
  • Package Content:1 x DC Gear Motor , 1 x Wheel , 1 x Bracket, several installation parts..
Check Stock

Traxxas 36054-1 1/10 Stampede 2WD Truck BlueX RTR w/TQ Radio/iD/XL-5 ESC

  • Traxxas 36054-1 - Stampede XL-5 1/10 2WD Monster Truck & iD Battery RTR, Blue.
  • Features: Chassis: Fiber Composite Tub .08" (2mm) Thick, Gray in Color. Drive: Rear Wheel, Motor 550 Size Traxxas Titan 12 Turn, Fan Cooled. Radio: Traxxas TQ Two Channel 2.4GHz with Steering/Throttle Trim/Reverse, Throttle Neutral Adjust and High Torque Waterproof Steering Servo, Water Tight Receiver Box with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
  • Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
  • Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
Check Stock

PROGRESSIVE AUTOMATIONS 12V Industrial Linear Electric Actuator. 6 in. 330 lbs. Stainless Steel Rod, High Force, Brushed DC Motor, Durable Stroke for Marine, Automation, Robotics PA-09-6-330

  • 【Specification】: Stroke: 1.2inch-6.5inch (Adjustable).
  • Rated Voltage: DC24V. Under the same 24V voltage, the closer to the axis, the greater the pushing force. The maximum pushing force is 7.5kg. The pushing force will be reduced by about half every 1 centimeter of movement outside the axis..
  • 【Aluminum Alloy Material】: The surface has been polished 27 times, the aluminum body efficiently dissipated the DC motor heat, it can make the motor stays cool to the touch even under load..
  • 【TORQUE】: When the Rocker Arm is Closest to the Axis AND voltage is 24V, the maximum pushing force can reach 15 lbs. However, with the decrease of voltage and the Rocker Arm is Far Away from Axis, the Torque will be smaller.The minimum torque is 3.2 lbs..
  • 【Stroke Adjustable】: The stroke can be adjusted by changing the position of the screw on the slide rail. The stroke of this product can be adjusted according to the needs of users..
  • 【Metal Gear Reduction Box】: All metal gear, you could use gear grease in the gear reduction box. In this way, the friction will be reduced and the machine will work more smoothly..
Check Stock

DAOKI 10PCS Rotary Encoder Module KY-040 Brick Sensor Switch Button Development Board with 10PCS 15×16.5mm Knob Cap, Dupont Cable for Arduino AVR PIC

  • ✔Product type: DC Gear motor with two-channel Hall effect encoder.
  • ✔Main Body Dimensions:74.8 x 25mm / 2.95in x 0.99in (L*D).
  • Out Shaft Dimensions: 11 x 4mm / 0.433 x 0.1575in (L*D) with 10 x 0.5mm / 0.39 * 0.017inches flat cut off.
  • ✔Single Output 240 Pulses Per Revolution: Gear Reduction Ratio: 1/20, Each Loop Output Pulses: 12PPR 20*12=240PPR.
  • ✔Wiring Diagram: Red - Motor power terminal (+).
  • ✔Application:Suit for Projects Such as Robotics,RC Car Model,Custom Servo, Arduino and 3D Printers,DIY Engine Toy..
Check Stock

BEMONOC Garage Door Motor 12V DC Right Angle Reversible Electric Gear Motor 45 RPM High Torque

  • Dc gear motor Dimensions: 175 * 62mm/ 6.88 * 2.44in(L * D).
  • ✔Out Shaft: 10mm shaft with 2 flats where flat to flat is 8mm and threaded end to fit a M6 tightening nut.
  • ✔Mounting: M6 screw holes, include 3 screws.
  • Main Material: Metal, Electronic component.
  • ✔Notice: the motor duty cycle is 100%, it can run continuously, it's our fault to make a wrong label, hope you can understand, any other questions....
Check Stock

Peristaltic Pump Self‑Priming Lab Dosing Pump Large Flow Aquarium Drip Metering Pump Stainless Steel DC Motor Pump(24v)

  • 【Low Noise】The wheel frame has ball bearings, quiet and long service life,with transparent PC removable pump head.
  • 【Replaceable Tube Head】the experimental liquid distribution pump adopts the design screw clasp,detachable while keeping the conveying stable, which is convenient to replace the hose.
  • 【Quantitative Delivery】The Quantitative Delivery Pump with imported peristaltic pump tube,which is resistant to corrosion acids and alkalis, and equipped with constant speed DC gear motor.
  • 【Scope of Application】These small metering pumps have self-priming function and can be widely used in Lab Analytical, analytical testing instruments, ink delivery, ice cream extraction, beverage machine pumps, kitchen equipment warewashing equipment, laundry equipment.
  • 【Specification】DC Motor Voltage: 12V / 24V (optional)--DC Motor Vurrent: 0.5-1.4A--Medium Flow: Flow direction of the pump depends on the positive and negative connections--Flow Range: 0-400ml/min--Pipe: Approx. 6.4 x 9.6mm / 0.3 x 0.4in (Inner Diameter x Outer Diameter)--Roller Type: Ball bearing.
Check Stock

YYQTGG Miniature Vibration Motor, Coreless Vibration Motor Sturdy Low Noise Professional for Beauty Instrument

  • Robust Aluminum Construction: The electric brushless dc motor kit is made of an aluminum alloy shell that withstand heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor, so you can easily switch the rotating gear..
  • Basic Parameters: This brushless go kart motor is strong and efficient. Input Voltage: 48V DC, Output Power: 2000W, Rated Current: 34A, Rated Speed: 4300 RPM, Maximum Speed: 5400 RPM, Maximum Current: 42A, Sprocket: T8F-11T. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi- purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
  • 2000W Brushless Motor: DC electric go kart brushless motor adopts 100% copper core, with low operating noise and excellent speed regulation performance. The high-precision rotor is made of high-tech components, with a glossy surface, waterproof and high efficiency. Get ready to let the race dust settle..
  • Speed Controller Included: This dc electric motor brushless is equipped with a controller, which can provide speed control within the ideal range. Speed adjustment method: Potentiometer. Model: BY15WF02-A, Current: 34A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..
Check Stock

CHANS TYC-40 Electric Synchronous Motor DC 12V 5RPM Shaft 35mm With Power Supply Input 100V-240V Output DC 12V For Ornamental Fiber Optic Christmas Tree

  • 【Description:】It's a combination of an DC 12V motor and a input AC 100V-240V and output DC 12V power supply. Easy to install and easy to operate.....
  • 【TYC-40 DC 12V Synchronous Motor Parameter:】 Voltage: 12V DC； Speed: 5r/min ； Shaft Length: 35mm； Shaft Screw Thread Inner Diameter:....
  • 【DC Power Supply Parameter:】 Input: AC 100-240V； Output: DC 12V ； Output current: 1500mA； Frequency: 60Hz； Power: 15W； Wire Length:....
  • 【Attention:】 1.The power adapter is an DC power supply,NOT suitable for AC motor. 2.Too high voltage will burn the motor and power supply.....
  • 【Package Include: 】 1*TYC-40 12V DC 5RPM 35mm Synchronous motor； 1*DC Power Supply； 1*Module.
Check Stock

CHANCS Small Synchronous Motor TYC-40 12V 5RPM AC Inner-Shaft Length 74mm for Christmas Santa Halloween decoration 2PCS

  • This is a TYC-40 AC 12V 6RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Speed: 5RPM； Shaft Diameter: 4.5mm ； Shaft Length: 74mm； Shaft Screw....
  • 【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
  • 【Package Content:】2PCS x Synchronous Motor.
Check Stock