Top 12v To 5v Raspberry Pi

GeeekPi Raspberry Pi 4 4GB Starter Kit - 32GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 5V 3.6A 18W Power Supply with ON/Off Switch, HDMI Cables for Raspberry Pi 4B (4GB RAM)

  • Includes Raspberry Pi 4 4GB Model B with 64-bit quad-core CPU (4GB RAM).For 2GB Version,please refer to ASIN: B0B7DFF7TY.
  • 8GB Version,please refer to ASIN:B09LYP7QH3.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • 32GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (4GB RAM).
  • 1x 32GB SD Card (with Card Reader and Adapter).
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

[17.5W 5V 3.5A] Raspberry Pi 4 Case, with iUniker 17.5W 5V 3.5A USB C Raspberry Pi 4 Power Supply with Switch Heatsink 40mm Cooling Fan for Pi 4 4 8gb/4gb/2gb

  • 【Cooling Raspberry Pi 4 Case】Raspberry Pi 4 B Case with 40mm Fan. Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
  • 【Accurately Access All Ports】iUniker Raspberry Pi 4 Model B Case Reserves Enough Space for Pi 4 Model B, So Users Can Access All Ports Without uninstall.
  • 【Advanced Cooling System】Raspberry Pi 4 Case with 40mm Fan.This Fan Has Better Heat Dissipation Performance Than Regular. High Performance Heatsink Help Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
  • 【5V 3.5A Type-C Power】iUniker Raspberry Pi 4 B Case with A Power Supply Which 5V 3.5A Type-C Port and Has UL Safety Certification. Pi 4 Power Supply with Switch Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
  • 【18-month Guaranteed】Our Customer Can Get 18-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Our Team by Amazon Email or Support Email..
Check Stock

GeeekPi Raspberry Pi 4 2GB Starter Kit - 32GB Edition, Raspberry Pi 4 Case with PWM Fan, Raspberry Pi 18W 5V 3.6A Power Supply with ON / Off Switch, 2PCS HDMI Cables for Raspberry Pi 4B (2GB RAM)

  • Includes Raspberry Pi 4 2GB Model B with 64-bit quad-core CPU (2GB RAM).For 4GB Version,please refer to ASIN: B0B3M2HKN6.
  • 8GB Version,please refer to ASIN:B09LYP7QH3.
  • This Raspberry Pi 4B case contains a super quite 40mm PWM fan and 4pcs heatsinks for good heat dissipation of Raspberry Pi 4B..
  • 18W 5V 3.6A Type C Power Supply will make your Pi work more stable. With ON/OFF switch, it's convenient for you to power on and power off your Raspberry Pi 4..
  • 32GB High Speed Class 10 Card with Card Reader and adapter , can work with all version Raspberry Pi.
  • Package Includes:1x Raspberry Pi 4B (2GB RAM).
  • 1x 32GB SD Card (with Card Reader and Adapter).
Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

  • ✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
  • The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
  • ✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
  • For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
  • ✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
  • User manual, pls refer to Geekworm WiKi search(X820)..
  • ✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
  • Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....
Check Stock

New Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection.

  • 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage..
  • 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
  • 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use..
  • 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc..
  • 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check Stock

Geekworm Raspberry Pi Zero 2 W 18650 UPS Expansion Board X306 & USB HUB for Raspberry Pi Zero 2W/Zero W(Not Include Raspberry Pi)

  • 【Compatibility】Compatible with Raspberry Pi Zero 2 W & Pi Zero W, NOT support Raspberry Pi Zero..
  • 【One-Cell 18650 UPS HAT】Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W, Max 5.1V 4000mA Power Backup with 18650 single cell battery holder.
  • 【3-Port USB HUB】On-board three USB 2.0 Ports.
  • Gain 3 USB2.0, downstream ports which offer High-Speed (480Mbps), Full-Speed (12Mbps), and Low-Speed (1.5Mbps).
  • 【How to Power】Power via USB Type-C 5V Power In port of X306.
  • (Recommend to use Geekworm UL listed 20W 5V 4A USB Type-C power adapter (ASIN:B09J856PND) ).
  • 【Cooling Solution】Recommend to use with C296 aluminum heatsink(ASIN: B09QMBCXLB) for Raspberry Pi Zero 2 W. C296 also compatible with Raspberry Pi Zero W by using thermal pads of different thicknesses..
  • 【Packing List】1 x X306 V1.1 Expansion Board.
  • Note: not inlcude Raspberry Pi board,18650 battery, GPIO Header & power adapter..
  • 【User Manual】Installation guide and user manual refer to Geekworm WiKi search X306..
Check Stock

125 ATX Power Supply Breakout Board and Acrylic Case Kit, ATX Power Supply Breakout Adapter for MCU Electronic Component Adjustable Voltage Knob 24Pin

  • 【ATX power splitter board】ATX power splitter board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V10.8V (ADJ) output voltage..
  • 【Precise Screw Positioning】The voltage output terminal of the ATX power expansion board corresponds to each screw terminal..
  • 【With an acrylic box】At the same time, the panel is also equipped with an acrylic box kit for easy use..
  • 【Easy to Connect】Compatible with 3.3V: STM32 MCU, network communication equipment, such as WiFi for Bluetooth and other devices, generally for microcontrollers, and some lowpower modules, etc. 5V: for Raspberry Pi/Tinker Board/Nano Pi/USB interface, etc..
  • 【Widely Compatible】Compatible with 9V motor drive, display drive module, etc..
  • 12V motor drive, LED lights, vehicle equipment requiring less than 24w of power, etc..
Check Stock

Miuzei Case for Raspberry Pi 4, Raspberry Pi 4 B Case with Fan 30mm, Pi 4 Model B 5V 3A Type-C Power Supply for Pi 4 B case, 4 pcs Aluminum Heatsinks Support Rpi 4B 8gb/4gb/2gb (No Raspberry Pi board)

  • ▶【Newest Raspberry Pi 4 Case】9-layer Acrylic Board With Good Nisibility. Miuzei Raspberry Pi 4B Case Perfectly Protects Your Pi 4 Board. You Can Check The Running Status of The Pi Board at Any Time as Well.
  • ▶【Accurately Access All Ports】Miuzei Raspberry Pi 4 Model B Case Layered Design Reserves Enough Space for Pi 4 Model B So That Users Can Access All Ports Without Barriers.
  • ▶【Advanced Cooling System】Raspberry Pi 4 Case with A Fan (35mm). Large Fan Has Better Heat Dissipation Performance Than Regular. Heatsinks Assists Raspberry Pi 4 To Heat Dissipation and Quickly Cool Pi 4 B CPU, GPU and RAM.
  • ▶【5V 3A Type-C Power】Miuzei Raspberry Pi 4 B Case with A Power Supply Which 5V 3A Type-C Port and Has ETL Safety Certification. Pi 4 Power Supply Length 5 ft (1.5m) Without Risk of Overcurrent and Overvoltage.
  • ▶【12-month Guaranteed】Miuzei’s Customers Can Get 12-month Warranty Service and Lifetime Technical Support. Any Doubt Just Reach Miuzei Team via Amazon Email or Support Email..
Check Stock

UCTRONICS Fan Adapter Board for Raspberry Pi Upgraded Complete Enclosure and Raspberry Pi Cluster Case, Compatible with Raspberry Pi 3/3B+/4B, Output 5V Power

  • This fan adapter board is designed for Raspberry Pi desktop cluster cases and supports any Raspberry Pi motherboard with micro USB or USB C power..
  • With 4 pins on the adapter board, it can provide 5v power to two fans, which is the best way to power your fans when your Raspberry Pi GPIO is occupied by the PoE hat and keep your device cool at all times..
  • Plug and play: The fan adapter fits any 5V fans with an XH2.54 duplex connector. Simply plug the red wire of the fan connector into the positive and the black wire into the negative to run. Size:0.51*0.59 inch..
  • Compatible ASIN List: Raspberry Pi Complete Enclosure: B09JNHKL2N, B09S11Q684.
  • Raspberry Pi Cluster Case: B099RR1ZCT, B09K439BTY all are suitable for this fan adapter..
Check Stock

Miuzei Raspberry Pi 4 Case with Fan Cooling Pi 4 Case with 4 Pcs Aluminum Heat Sinks Pi 4B Case for Raspberry Pi 4 Model B -Black/Blue (Pi 4 Board Not Included)

  • Raspberry Pi 4 Case for Raspberry Pi 4 - Miuzei clear blue acrylic raspberry pi 4b case is specially designed for raspberry pi 4 modle b / 4 b, and perfect compatible with raspberry pi 4 /4b. assembly easy for beginners and amateur..
  • Raspberry Pi 4 Case With Fan - New Raspberry pi 4b case with a Silence DC 5V cooling fan and 4 pcs Aluminum heatsinks, cooling system keep your Raspberry pi 4 B cool quickly even the CPU under high load..
  • Raspberry Pi 4 Model B Case - acrylic pi 4 case won’t block the signal.the rubber feet on the bottom lid can provide a stable platform for raspberry pi 4 case so that it allows air to circulate on the bottom side of the board and avoid the screws scratching the desk surface..
  • Easy To Access All Ports - Miuzei raspberry pi 4 case fan can perfect Access to the USB-C Power Connector, Dual Micro HDMI, Audio/Video, USB and Ethernet Ports, GPIO Port, Camera Cable, and Access to the Micro SD Card..
  • Packaging Content & After -Sales - you will receive pi 4 clear blue case, 4 piecess raspberry pi heatsink, 35mm cool fan, 4 piecess rubber feet, screwdrive, awesome looking, it can make your pi looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..
Check Stock

SunFounder Raspberry Pi UPS Power Supply Module V2.0 Supports Pass Through Charging, 5V/3A Lithium Battery Power Pack Expansion Board Compatible with Raspberry Pi 4, 3 and All Model B/B+

  • ➢Raspberry Pi UPS - A Power Supply Module designed for Raspberry Pi UPS compatible with Raspberry Pi 4, 3 and all Model B/B+ series. Also suitable for other boards powered by USB (5V/3A) such as Banana Pi/ODROID-C4..
  • ➢Pass Through Charging - Requires two 18650 Batteries (not included), with Pass through Charging function, it can power to the Raspberry Pi while charging ..
  • ➢Over Charge/Discharge Protection - Charging ends when the total battery voltage reaches 8.4V. When the single battery voltage is below 3.2V, the battery protection activates and the battery is no longer discharged..
  • ➢Balance Charging & Over Heating Protection - The battery charging current will be reduced or even discharged if the voltage of a single battery exceeds 4.2V. If the temperature reaches 75 degrees Celsius, the DC-DC will shut down to prevent overheating damage..
  • ➢UPS Output: 5V/3A, UPS Input: 5V/2A, Dimension: 90mm x 56mm x 24mm.
Check Stock