Top 12volt Inline Fuse Holder

Nilight - 50029R 120 Pcs Standard Blade Fuse 5A/7.5A/10A/15A/20A/25A/30A AMP Assorted Set with 10 Pack 14AWG ATC/ATO Inline Fuse Holder 2 Years Warranty 1 Count Pack of 10

  • Standard Blade Fuse: 0. 75 x0. 74 x0. 3 Inch. Fuse Type: Blade. Material: Zn alloy/Plastic. Protect your car and your electrical device from short circuit, overload etc.Material:plastic.
  • 10 Pack In-Line Fuse Holder: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit..
  • Safety Protection: Unique design of the dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is an inline fuse holder extremely safe and reliable. Easy to use: Turn one fuse slot into two while providing protection for both circuits.
  • Suitable Fuses: Fits for 1A, 2A, 3A, 4A, 5A, 7. 5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19. 1 × 18. 5 × 5. 1 mm.
  • Package Include: 10 x 14AWG ATC/ATO Inline Fuse Holder and 120 PCs standard blade fuse+Puller.
Check Stock

HK 12V 150db Air Horn, 18 Inches Chrome Zinc Single Trumpet Truck Air Horn with Compressor Powerful Loud 150db for Truck Boat SUV Train (Sliver)

  • High-Cost Performance: The HK air horn is made from premium quality chrome plated zinc material to ensure durability and longevity.It can work in a variety of temperature environments, no matter wherever you are..
  • Universal Fit: The air horn fits for any 12 volt vehicle (Car, Truck, SUV, Motorcycle, Boat, off Road Vehicle, Busses etc). NOTE:IT ONLY FIT FOR 12V DC POWER..
  • Super-Loud: 150DB Trumpet Air Horn Compressor Kit will produce a powerful loud tuned train sound that blares out a warning that can't be ignored..
  • Easy to install: Almost everything you need for installing the air horn is included in packing. Package include:1 X Slivery Air Horn,1 X Compressor,1 X Air Hose,1 X Set of Mounting Hardware,1 X Relay,1 X Wired Relay Plug,1 X Fuse,1 X Inline Fuse Holder,1 X Manual.You just need to buy some electric wires..
  • WARNING: This air horn kit is really loud. Please do not use it near school or hospital, residential area..
Check Stock

GNAWRISHING 16 AWG ATC/ATO Inline Fuse Holder(3PCS) and Standard Blade Fuse 5PCS of Each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A Assorted Set

  • 【PRODUCT STANDARD】Fuse Holders 16 gauge (AWG) red color 12 inch/30cm copper wire , and standard blade fuse: 0. 75 x0. 7 x0. 2 Inch. ( 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A) 5pcs each..
  • 【PACKING QUANTITY】 3PCS 16 AWG ATC/ATO Inline Fuse Holder, 5PCS Blade Fuse of each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, total 45PCS Blade Fuses. 6PCS terminals connectors..
  • 【QUALITY ASSURANCE】 It is tin-plated copper strands. This is a very high quality type of wire with excellent resistance to corrosion, and is typically found in marine grade products..
  • 【WATERPROOF AND DUSTPROOF】Waterproof and dust proof capacity and reliable performance..
  • 【OUR INDUSTRY LEADING ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE】 EACH AND EVERY Fuse Holder and Blade Fuse is COVERED with the ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE! If for ANY REASON YOU ARE NOT COMPLETELY SATISFIED with the Fuse Holder and Blade Fuse, we will REFUND the ENTIRE AMOUNT (or replace it free-of-charge)..
Check Stock

MGI SpeedWare 14AWG Inline Fuse Holder Harness with 15AMP ATC ATO Blade Fuse (2-Pack)

  • SUPERIOR PROTECTION — 14 gauge copper wire and blade fuse.
  • VERSATILE — Designed for 12-24vDC ATO/ATC blade style fuses for use in cars, trucks, boats and more..
  • WEATHERPROOF — Tight fitting water-resistant cap protects fuse from dust and moisture.
  • EASY TO USE — Simply connect the inline fuse holder between your power source and load.
  • Package includes 2 x 14 gauge fuse holders, 2 x 15 amp blade fuses.
Check Stock

MGI SpeedWare Mini-ANL/MIDI Inline Fuse Holder with Cover and Bolt-Down Studs (50A Fuse)

  • Protect your automotive, truck, or marine electrical from short circuit.
  • Simple installation. Mount where you need it, connect your inline wires, and bolt down your fuse.
  • Cover ensures dust and moisture stays away from the fuse. A small window allows for quick visual inspection..
  • Fuse is easy to replace. Use with 12-24vDC mini-ANL or MIDI fuses up to 200 AMP.
  • Package includes: 1 x Surface-Mounted Fuse Holder with Cover and 50A Mini-ANL Fuse.
Check Stock

Blue Sea Systems 5129 Fuse ANL 200-AMP

  • Wire Gauge:- It can securely hold the fuse and use it with 1/0,2,4AWG Ring Terminals..
  • Application：These inline fuse will protect your controller, wire, and battery from overcurrent，suitable for auto car, boat ，truck audio video systems or other vehicles..
  • Material：ANL fuse made of copper alloy and gold plating on the surface, durable and reliable to use, heat resistant, melting resistance and good conductivity, clear cover and holder features transparent design, allow you to visually see the operation of the fuse, waterproof cover protect the internal fuses from water and further damage..
  • Notice：Because the fuse will be damaged during transportation, the fuse and fuse box are packed separately and can be used after simple installation after receiving the goods..
  • Package:2pcs ANL Fuse+2pcs ANL Holder+4pcs Copper Ring Terminal+4pcs Heat shrinkable tube.
Check Stock

Recoil FH12-10 10 Pack ATC/ATO Inline 12AWG Fuse Holder with 10pcs 15A & 20A Fuses

  • Heavy duty 12AWG red power wire, Protecting circuits and electrical equipment.
  • Tight-fitting waterproof lid for moisture-proof, waterproof performance and dust proof..
  • Fuse holders wire is made of pure Oxygen Free Copper as conductor to ensure its excellent electrical conductivity..
  • Package include: 10 x Inline holder, 10 x 15A fuse, 10 x 20A fuse.
Check Stock

HUIQIAODS 2 Pack Mini Blade Fuse Holder 18 Gauge Waterproof Pigtail Inline Fuse Holder with 5A ATM Fuses

  • ♪ Premium Quality---Inline blade fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity.Protecting circuits and electrical equipment..
  • ♪ Waterproof Protection---Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust proof..
  • ♪ Heavy Duty 18 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and etc..
  • ♪ Easy Installation: Insert your fuse to the holder or you can change different votage fause,close the cover and then connect the fuse holder to the circut.
  • ♪ Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.
Check Stock

12 Volt, 100 PSI High Volume Air Compressor

  • 12 VOLT Operated - 150PSI Max Working Pressure, engine must be running during use..
  • 150 PSI maximum working pressure and 33% duty cycle.
  • Direct heavy-duty dual battery clamps with 40-amp inline fuse.
  • Includes deluxe carry bag anti-vibration tray and more.
  • Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight..
Check Stock

12 Gauge Fuse Holder ATC/ATO SIM&NAT 5 Packs in-Line Automotive Blade Fuse Holder with 65PCS Standard Car Fuses 1A 2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 35A 40A Automotive Replacement Fuses

  • Heavy Duty 12 AWG Fuse Holders, Protecting circuits and electrical equipment. Easy to add additional circuits for cars, CD players, fax machines and....
  • PREMIUM QUALITY: Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and....
  • SUITABLE FUSES: Fits for 1A - 40A ATC/ATO blade fuse of 19.1 × 18.5 × 5.1 mm.
  • Waterproof cap of fuse holder: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof, waterproof performance and dust....
  • Package included: 5 pack inline fuse holder + 65pcs car fuses sets ( 1A / 2A / 3A / 4A / 5A / 7.5A / 10A / 15A / 20A / 25A / 30A /35A / 40A) 5pcs....
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock

10 Gauge Fuse Holder - 10 AWG Inline Heavy Duty Wire Fuse Holder with 30 AMP ATC/ATO Blade Fuses for Automotive Car Motorcycle Marine RV 2Ft/60CM

  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine..
  • The heavy duty 10 gauge (AWG) tin-plated copper wire is made of high quality material with good electrical conductivity and melting resistance, also....
  • 10 gauge (AWG) thick pigtail wire allow you to splice it into any project..
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Package including: 10 Gauge Inline Fuse Holder with 30A 20A 15A Fuses, 2 years long time warranty, just contact us if you have any issues about the....
Check Stock