Top 15xtorque Thrust 2

3575169 Turbocharger Rebuild kit for Holset HX35 HX35W HY35 HX40 HE351 HE351CW

  • ★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment.
  • ★Fit for Holset HX35 HX35W HY35 HX40 HE341 HE351 & HE351CW turbochargers.
  • ★Improved thrust bearing with large diameter oil feed holes.
  • Complete gasket set included. including 28 quality components.
  • ★Commons Vehicles With This Turbo: for Dodge Ram Cummins Turbo Deisel.
  • ★This kit includes: Machined from Copper Bar Upgraded Thrust Bearing 2 Journal Bearings 4 C-Clips to Hold in the Bearings 1 Thrust Collar 1 Thrust....
Check Stock

MRC R4AFF Small Ball Bearing, Double Shielded, No Snap Ring, Inch, 1/4\ ID, 3/4\ OD, 27000 rpm Max RPM, 261 pounds Static Load Capacity, 632 pounds Dynamic Load Capacity

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

10 Sets Thrust Needle Roller Bearings with Washers 0.75 Inch Bore 1.25 Inch OD Industrial Bearing with Nice Load Carrying Capacity and Stiffness NTA1220 2TRA Thrust Needle Roller Bearing

  • Well made: the needle roller thrust bearing has fine workmanship and a nice stability, which can work well and operate efficiently.
  • Notes: it only bear axial load in one direction.
  • Package includes: you will receive 10 sets thrust needle roller bearings with washers, 3 pieces of each set, a total of 30 pieces, sufficient quantity to meet and satisfy your in daily life.
  • Reliable material: the thrust needle roller bearing is made of steel, has good heat tolerance under heavy load, reliable to use, which also has a nice load carrying capacity and stiffness, with a smooth surface, helping it work well.
  • Easy to use: featuring a steel cage guide rail and evenly distributed rollers, the thrust needle roller bearing take less space, reduce friction, vibration and noise, which is convenient to use.
  • It also can be applied as a raceway between the faces of adjacent machine components by combining 2 thrust washers.
  • Fit for: thrust bearing can be widely applicable in your daily life, such as minibike, agricultural machinery, conveying equipment, trailers, robots, elevators, rolling mills and so on.
Check Stock

Apocalypse Now

  • Exterior: 12' 4" x 4' 6" / Weight: 75 lbs. (hull only).
  • Material: 1000 Denier Reinforced / Seam: Quadruple Overlap Seams.
  • Capacity: 2 Adults or 650 lbs / Inflation & Assembly time: 10 mins. Inflation Pressure: 3.2 psi.
  • Engine Capacity: 3 hp gas (15" Shaft) or 70 lbs. thrust Electric Motor (45 lbs. max wt.).
Check Stock

UNK Propeller 14.25 x 21 Prop for Mercury Mercruiser Alpha One 3-Blade Aluminum with Complete hub kit 14 1/4 x 21

  • 14.25" diameter x 21" pitch Aluminum, 3-blade, RH rotation prop.
  • Includes 15 spline hub kit (hub, splined hub, thrust washer, prop nut and keeper).
  • Fits Mercruiser Alpha One (gen 1 and 2), Bravo One 4 3/4" Gear Case Thru-Hub Exhaust with 15 Tooth Spline.
Check Stock

Float Plan

  • Capacity: 4 Adults or 1200 lbs. Exterior: 10' x 5' Assembly time: 15 min..
  • Engine Capacity: 4 hp gas (15 (15" shaft minimum, 45 lbs. Max weight) or up to 74 lb. Thrust Electric (min 30" shaft, 45 lbs. Max weight).
  • Material: 1000 Denier 36 mil Floor: 1000 Denier Reinforced.
  • Speed Estimates: 5-6 mph w/Gas, 4-5 mph w/Electric.
  • Weight: 45 lbs (hull only), 78 lbs (w/ floorboards & motormount).
Check Stock

The Crew - PlayStation 4

  • Capacity: 4 Adults or 1200 lbs. Exterior: 10' x 5' Assembly time: 15 min..
  • Engine Capacity: 4 hp gas (15 (15" shaft minimum, 45 lbs. Max weight) or up to 74 lb. Thrust Electric (min 30" shaft, 45 lbs. Max weight).
  • Material: 1000 Denier 36 mil Floor: 1000 Denier Reinforced.
  • Speed Estimates: 5-6 mph w/Gas, 4-5 mph w/Electric.
  • Weight: 45 lbs (hull only), 78 lbs (w/ floorboards & motormount).
Check Stock

Sea Eagle Green 375fc Inflatable FoldCat Fishing Boat - Pro Angler Guide Package

  • Exterior: 12' 4" x 4' 6" / Weight: 75 lbs. (hull only).
  • Material: 1000 Denier Reinforced / Seam: Quadruple Overlap Seams.
  • Capacity: 2 Adults or 650 lbs / Inflation & Assembly time: 10 mins. Inflation Pressure: 3.2 psi.
  • Engine Capacity: 3 hp gas (15" Shaft) or 70 lbs. thrust Electric Motor (45 lbs. max wt.).
Check Stock

DNA MOTORING TOOLS-00243 24-pcs Disc Brake Caliper Piston Compressor Wind Back Repair Tool Kit for Cars, with Carrying Case,Red

  • ...earch when testing car applications and fitments of our products. To ensure high strength and durability, we engineer the products with only high-quality materials..
  • COMPLETE CALIPER COMPRESSION TOOL - This brake caliper tool kit includes 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters to fit most domestic and import vehicle makes and models and give you everything you need to service your brake pads..
  • SUPERIOR CONSTRUCTION - All components are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off. Highly precise forging and molding help these parts work effectively without damage to your brake pistons..
  • CONVENIENT STORAGE - This Professional Disc Brake Caliper Tool Set can easily store in one hard storage case with handles that is easy to carry and compact for convenient storage. A Essential tool kit for any garage, DIY or professional automobile maintenance..
  • PACKAGE INCLUDES - [18] Adapters for popular car brands.
Check Stock

LEFEET Underwater Scooter S1 Pro with Action Camera Mount, Modular Sea Scooter, 40M Depth Rating for Diving, Snorkeling, Swimming

  • Exterior: 12'6" x 40" x 6" / Deflated: 45" x 15" x 10" / Board Thickness: 6".
  • Hull Weight: 45 lbs. (hull only), 48 lbs. (w/ motor mount). Capacity: 2 Person or 500 lbs..
  • Material: 1000 Denier Reinforced Drop Stitch / Seam: Quadruple Overlap / Air Valves: One Way.
  • Inflation and Assembly Time: 7 Minutes / Inflation Pressure: 12-15 psi.
  • Engine Capacity: 70 lb. thrust (45 lbs. max weight).
Check Stock

4pcs EMAX RS2205 2300KV Brushless Motor 2CW 2CCW for QAV250 QAV300 FPV Racing Drones Multirotor Quadcopter

  • Update Version:Compared to the RS2205, maintain the RS2205 2600KV Brushless Motor's advantage, and 2 grams lighter than the first version of the RS2205,and the new RS225-S cranks out another +100g of thrust..
  • High Quality Guarantee:The new standard of EMAX RS2205-S 2600KV Brushless Motor is upgraded with features racing multirotors absolutely need. The motor is lighter, yields faster bell rotational response, higher thrust..
  • Strong Thrust Power: Produces over +1,000g of thrust using 4S and GF5045BN, is more stronger than other ordinary 2205 brushless motor..
  • Support Your Racing Drone:This 2205S 2600KV brushless motor is perfect for your 210 220 250 280 FPV racing drone quadcopter, and suitable for 5 inch propellers like 5030 5035 5045 props.
  • Size and Design:This have a weight Approx 30g with a normal size-0.87*0.2 inch. 2205-S 2600KV Brushless Motor is no difference between CW and CCW..
Check Stock

Bellabooty Exercise Hip Thrust Belt, Easy to Use with Dumbbells, Kettlebells, or Plates, Slip-Resistant Padding that Protects Your Hips for the Gym, Home Workouts, or On the Go

  • HIP THRUST ANYWHERe, ANY WEIGHT - At home, at the gym, or on the go, use our Bellabooty Belt for efficient and comfortable hip thrust exercises. Our portable hip thrust belt works for any level of user with a variety of weights up to 400 lbs..
  • COMFORTABLE, NO MORE SORE HIPS - The original Bellabooty Belt rests perfectly on your hips. Has a soft padding to protect your hips and a grip to keep the belt in place. No more sore hips with our booty workout equipment..
  • SAFE, EFFECTIVE, PATENTED DESIGN - Designed for natural balance, our hip thrust belt “hugs” your hips. Built with slip resistant padding, you no longer need to worry about the weight sliding and throwing you off balance providing you with better balance than a barbell.
  • EASY SET UP IN 20 SECONDS OR LESS - Bellabooty Belt for hip thrust sets up in 20 seconds or less. Simply loop the straps through or around whatever weights you are using and secure them in place. Close the booty belt and get ready for a great hip thrust workout..
  • SQUATS, PLANKS, LUNGES & MORE - Elevate your workout with the original Bellabooty Be....
Check Stock