Top 16 Holes Flute

Steel Tap Extractor Set M4 M5 M6 M7 M8 M9 Broken Head Taps Remover Stripped Screw Tap with Box 6 Piece

  • ❤ LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • ❤ 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • ❤ SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • ❤ SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • ❤ QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

Sonata for Flute and Piano in D-Sharp Major Op 94 II Scherzo Presto

  • Best Profiisunal Bansuri Flute For Concert Quality Indian Bansuri Bamboo Flute - Made, Tuned & Checked By Indian's Finest BANSURI Musician.
  • PROFESSIONALLY TUNED - SCALE: D - Sharp Middle INDIAN - MADE TO PERFECTION.
  • LOW FREQUENCY & COMPLEX TONE - WARM, SWEET AND SEAMLESS.
  • Material:- Premium Quality Bamboo PACKED IN SUPER SAFE Bag FOR AN INSURED TRANSIT.
Check Stock

Drill America 1\-60 High Speed Steel 3 Flute Center Reamer, Dew Series

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Through-hole flute style has a single flute that passes through the cutting head to reduce vibration and chip clogging.
  • Designed for countersinking holes for centers or for enlarge existing holes.
Check Stock

Zaza Percussion- Professional Polished Bamboo Bansuri Flute - Indian Flute With Carry Bag D- Sharp Middle

  • Best Profiisunal Bansuri Flute For Concert Quality Indian Bansuri Bamboo Flute - Made, Tuned & Checked By Indian's Finest BANSURI Musician.
  • PROFESSIONALLY TUNED - SCALE: D - Sharp Middle INDIAN - MADE TO PERFECTION.
  • LOW FREQUENCY & COMPLEX TONE - WARM, SWEET AND SEAMLESS.
  • Material:- Premium Quality Bamboo PACKED IN SUPER SAFE Bag FOR AN INSURED TRANSIT.
Check Stock

uxcell Masonry Drill Bit 16mm x 160mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for SDS X4 Impact Drill

  • Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 2-flute design for fast dust removal.
  • Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life..
  • Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank.
  • Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock.
Check Stock

uxcell Masonry Drill Bit 16mm x 200mm Carbide Tipped Rotary Hammer Bit 9mm Round Shank for SDS X4 Impact Drill

  • Carbide Tip: Carbide-tipped drill bit head is harder and tougher to extreme loads. 4-flute design for fast dust removal.
  • Flute Design: Optimized flute design to reduce bit stress and make the bit run cooler for long life..
  • Centric Tip: Centric tip for optimal hole geometry and provides rounder holes. For use in drill requiring Special Direct System shank.
  • Wide Use: Designed for fast drilling in concrete, masonry, artificial stone, and rock.
Check Stock

Flute Cases Oxford Cloth Carrying Case Bag Flute Accessories Waterproof Wear Resistant Lightweight 16 Holes Flute Carrying Bag for Transverse Flute 39.5 x 12 x 7cm

  • Material: Made of high quality Oxford cloth material, durable and wear resistant, can be used for a long time.
  • Box Size: Approx. 39.5 x 12 x 7cm / 15.5 x 4.7 x 2.7in. The Longest Length of the Strap: Approx. 103 x 3 x 1cm / 40.5 x 1.2 x 0.4in.
  • Easy to Clean: Upper handle and adjustable shoulder strap make it more convenient to carry and easy to clean.
  • Suitable for: Suitable for 16 holes flute. Protect your flute from bumps. Keep all parts of the flute neat.
  • Easy to Stone: No matter where you choose to take it, your flute will be comfortable to carry and well protected. There is a special zipper bag for storing accessories such as cleaning sticks and cleaning cloths.
Check Stock

Be91eiter Damaged Screw Extractor Set, 22 PCS Stripped Kit for Broken Bolt All-Purpose HSS Remover Set with Magnetic Extension Bit Holder & Socket Adapter, Silver

  • ❤ LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • ❤ 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • ❤ SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • ❤ SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • ❤ QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

NEIKO 10198A Step Drill Bit Set | 5 Piece, 4mm- 35mm | Metric Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits, 135 Degree Point

  • 135° SPLIT POINT TIP: Each step down drill bit is made with high strength HSS and is black and cobalt-treated for added durability to ensure long service life and longevity. The design of the tip angle increases cutting speed with self-centering and prevents walking off the surface of workpiece..
  • 2 FLUTE DESIGN: This metric stepper drill bit has a two-flute design that clears chips faster, smoother, and allows particles to escape easily making cleaner holes at any worksite..
  • TRI-FLATTED SHANK: Each unibit optimally fits into power tools such as impact drill chucks securely and eliminates slip for higher efficiency of output..
  • HSS COBALT STEP BIT: This step up drill bit set cuts through steel, sheet metal, wood, plexiglass, enlarges a hole, and other surfaces creating relatively clean holes with only a small amount of pressure and deburrs as you drill..
  • MULTIPLE HOLE DRILL BIT: 6 millimeter shank: (9 steps- 4, 5 , 6, 7, 8 ,9 10, 11, 12 mm),(5 steps- 4, 6, 8, 10, 12 mm) and 8mm shank (7 steps- 6, 8, 10, 12, 14, 16, 18 mm),(10 steps- 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm) and 10mm shank (13 steps- 6, 8, 10, 13, 16, 18, 20, 22, 25, 28, 30, 32, 35 mm)..
Check Stock

IRWIN Step Drill Bit, 1/8-Inch to 1/2-Inch Step, 1/4-Inch Shank (10231) Silver|Silver metallic

  • This product is manufactured in United States.
  • Save time because you don't need to change drills for different-sized round holes in thin materials. Each drill acts as a pilot for the next size..
  • Patented single-flute cutting edge gives greater control through steps and a true round hole every time..
  • Ideal for drilling holes into thin materials such as stainless steel, copper, brass, aluminum, plastic and laminates..
  • Speed Point tip penetrates faster than previous Unibits and prevents walking. 3-faltted hex shank prevents slipping in drill chuck..
  • Drill diameters etched in flute for easy identification..
  • SpeedPoint tip penetrates faster than previous Unibits and prevents walking. 3-faltted hex shank prevents slipping in drill chuck..
Check Stock

Luckyway 1-Piece 15 Steps HSS-CO(M35) 1/4 Inch to 1-3/8 Inch Titanium Step Drill Bit for Metal, Stainless Steel Drilling

  • DIMENSIONS - 15 STEP SIZES: 1/4",5/16",3/8",7/16",1/2",9/16",5/8",3/4",7/8",15/16",1",1-1/8",1-3/16",1-1/4",1-3/8"..
  • APPLICATION - Capability and durability in drilling holes in plastic, aluminum, copper, stainless steel,HRC40 steel plate and many other types of sheet metal.★If used in 4mm stainless steel plate, can make more than 500 holes. ★It can be used to bore holes in steel plates up to HRC40..
  • MATERIAL - HSS-CO(M35)for longer life, higher efficiency,very easy drilling.Service life: M35>M2>HSS4241.
  • FEATURES - 135° SPLIT POINT TIP: increases cutting speed with self-centering and prevents walking..
  • TWO-FLUTE DESIGN: Clears chips faster and allows particles to escape easily..
Check Stock

29-Pack Woodworking Chamfer Drilling Tools WENHUALI 6 Countersink Drill Bits 7 Counter Sinker Drill Bit 8 Wood Plug Cutter 3 Step Drill Bits and 3 Countersink Drill Bit with 1pcs Center Punch.

  • ...d, particle board, fiberboard, logs, plastic boards, PVC pipes used on hand drill, bench drill and electric drill..
  • 3 Pcs 1/4" Metric Hex Shank HSS Step Drill Bit Set – With titanium coating, it has great heat/ corrosion/ rust resistance. Specification: 3/16''-1/2'', 1/4''-3/4'', 1/8''-1/2''. Suitable for drilling holes within 0.12 inch (Iron Plate, Copper Plate, Aluminum Plate).
  • within 0.2 inch (Wood, PVC sheet, Insulation Boards). Not recommend for hard and brittle materials such as stainless steel, glass, tile floors, walls etc..
  • 7Pcs 3- Pointed Countersink Bit for Wood – Made of high carbon steel with high hardness & abrasion resistance, large chip flute and five edge chamfers can drain sawdust faster and easier(Size include: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 10mm). With 1pc hex L-wrench, you could easily remove and adjust counter sleeve depth and drilling depth..
  • 8Pcs 3/8" Shank Wood Plug Cutter Drill Bit Set – Made of durable carbon steel, it is used for tapered 1/4", 3/8", 1/2", 5/8" corks to cover recessed screw holes or hide imperfections.Could cut the plug 22mm/23mm/25mm/26mm in depth as well..
  • 6Pcs 1/4" Hex Shank 5 Flute Countersink Drill Bit – Made of high speed steels, they're pectect for sinking 90° holes into Wood and PVC boards f....
Check Stock