Top 1w 445nm Laser Engraver

IPL Glasses Eye Protection, 200-2000nm Wavelength, Absorption Technology Laser Safety Goggles UV 400, Tanning Goggles, Eyewear, Eyepatch, Eyeshields for Infrared LED Red Light Hair Removal Beauty Therapy

  • For intense pulsed light protection, IPL Safety Goggles Glasses 200nm~2000nm, OD 5+. Compatible with 405nm, 445nm,450nm, 635nm, 650nm pulsed light etc, for laser hair removal and laser beauty treatment, all-round absorption.
  • Safe for use with sunlamps and UV 400nm light treatment devices.
  • Cosmetic patient & operator laser protective goggles, suitable for Intense pulsed light: IPL, cosmetic laser procedures, leds treatment, Removel Tattoo, teeth whitening, indoor or outdoor tanning.
  • Made by thermoplastic polyurethane frame, polycarbonate lens, humanized design, comfortable to wear, EN207 CE certified.
  • Special for ergonomics, harmlessness, comforts, airing and flexibility.Safety glasses with wrap-around design.Flank with unique ventilation and protection system, protect eyes from splashing all-round.
Check Stock

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

Laser Safety Glasses Goggles Eye Protection UV Eyewear Blocking OD4+190nm to 540nm Eyeglasses for Hair Removal Treatment Cosmetology Operator for Blue Light Sanitize,Dental Operation Adjustable Temple

  • Professional Eye Protection : The Wavelength Laser Safety Glasses Compatible with Typical 405nm, 445nm,450nm, 520nm, 532nm laser light . This laser safety glasses are OD 4+.
  • Visible light transmittance: 30%, Enhance Red Beam Laser at daylight high-impact, splash-resistant, eye protection. Designed for laser exposure in industrial, military and medical applications to reduce eye injury..
  • Durable & Comfortable : We offers advanced collection of polymer or polycarbonate laser safety eyewear filters. We employ leading material science at our production facilities to consistently manufacture the most advanced laser absorbers and coatings. a lightweight, sophisticated frame, these stylish safety glasses ensure user comfort all day long..
  • Prevent UV Blue light Blocking : Eye protection goggles to prevent UV and violet/blue/red/infrared Lasers, and for hair removal eye protection, reliable and practical..
  • One Size Fit Most Design :Adjustable temples for laser safety glasses fit most people. Wrap-around, one-piece, scratch-resistant lenses protect you or your patient's eyes from laser damage in all directions.
  • What You Will Get : The Laser Goggles with Case and Clean Cloth .1-year manufacturer warranty. Any issues or concerns, pls contact us freely , we will repl....
Check Stock

Lights88 Laser Module Red\Line\ Laser Generator 650nm 5mw (2 Pack) Diode Lasers

  • 12V TTL 200mW To 2W 445nm 450nm Laser Diode LD Power Supply Driver Board.
  • Input Voltage: DC 8-14V Max. Output Voltage: DC 12V (adjustable) Max.
  • For Red, Green and Blue Laser Drive Power.
  • AC / DC can be used, regardless of positive and negative input to improve the non-professional user convenience.
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • ...s steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving module kit protective lens can have no fingerprints, it will affect the cutting ability, and the performance of the module decreases..
  • SPECIFIC PARAMETER DETAILS – Fixed focus: 45mm.
Check Stock

ENJOYWOOD Laser Engraver, Desktop and Handheld 2 in 1 Laser Engraving Machine, Fiber Marking Machine for Metal Plastic Leather, 0.001mm/4K Engraving Accuracy, 0.01mm Compressed Laser spot.

  • 【High Power Laser Engraver Machine】 100W whole machine electrical power, the pulse peak optical power can reach 20000W.Upgraded compressed spot technology.The ultra-fine laser focus area is reduced to 0.02mm in diameter, and the minimum markable character is about 0.06mm*0.15mm (tested with focusing film)..
  •  【Fine Engraving】0.01mm ultra-long and ultra-fine end-pumped infrared laser enables every detail of engraving to be presented, perfectly presenting 4K-level high pixels. Precise positioning,ENJOYWOOD M4 adopts dual-infrared light positioning design, which can accurately locate the marking position without offset..
  • 【Desktop and Handheld 2 in 1 Laser Engraver】 M4 adopts a highly integrated design, and the core components are lightweight, which brings more usage scenarios. It can be hand-held to mark on non-horizontal surfaces, walls, and facades. Start your creation anytime, anywhere..
  • 【Industrial Galvanometer Technology】 M4 marking machine uses 1064nm wavelength infrared light ....
Check Stock

LaserPecker 3(Basic) Laser Engraving Machine, Fiber Laser Engraver 1064nm Cold Red Light 0.01mm Compressed Spot, 48000mm/min High Speed Handheld Fiber Laser Marking Machine for Metal Jewelry Plastic

  • Fiber Laser Engraver for Metal and Plastic: LaserPecker 3 laser engraver with 1064nm fiber laser for metal and plastic materials. e.g: stainless steel, gold, silver, aluminum, titanium, copper, coated metal plate.
  • acrylic, plastic, etc. Can be directly engraved without any preprocessing..
  • Much Smaller Compression Spot: LaserPecker 3 laser engraving machine adopts a 0.01mm*0.01mm ultra-fine compression spot, achieving detailed and vivid engraving images. Present pixels with 4K level perfectly..
  • Ultra Fast Engraving: LaserPecker 3 fiber laser marking machine with innovative galvo technology achieves high-speed engraving at 48000mm/min. Comparable Industrial-grade engraving speed brings a subversive experience..
  • Easy To Focus, Quick To Start: LaserPecker 3 laser engraving machine adopts dual infrared light positioning design (When the two red light spots are coincident, the focus is correct), which can accurately locate the marking position without offset and good position.
  • Quickly and accurately control the lifting of electric stand, can be realised easy focus on objects of different heights..
  • Versatile Base, Create With Easy: With the help ot the positioning plate on the base, the position of the engraving objects can be fixed/adjusted, making batch engra....
Check Stock

Comgrow Laser Rotary Roller, Laser Engraver Aluminum Y-axis Rotary Roller Engraving Module for Engraving Cylindrical Objects Cans, with 8mm-86mm Adjustment for DIY Laser Marking Different Size

  • 【Wide compatibility】Comgrow rotary laser engraver is applicable to Laser engraving machine and 3D Priter. Work with COMGO Z1, ROBO CNC laser, Comgrow Laser Master, Creality 3D printer Ender 3 and most other brand laser engraver.Note the description in Figure 2.
  • 【Easy Setup and Use】Ready to use laser rotary roller after unpacking, Connect to laser engraving machine simply by replacing Y-axis terminal, no assembling needed, smaller size to better work with most laser engravers..
  • 【Perfectly matched with engraving machine to engrave round objects】The One-piece rubber laser engraver rotary, hardness up to 70A, stronger friction, allowing you to perform 360-degree engravings on round or cylindrical objects such as cups, pen,bottles, pipes, bowls, drums and tubes and over-length plate engraving or cutting..
  • 【Engraving Table Height】 This aluminum rotary laser engraver has a height of 2.36”. Please ensure the space between your machine’s laser head and engraving table can accommodate this added height. Adjustable axes distance up to 3.39” to process a wide range of cylinder diameters..
  • 【One-year Warranty】 Comgrow rotary engraver includes a 12-month warranty to guarantee a reliable product in good working order.We are COMGROW manufacturer....
Check Stock

M140 M-Type Japan 2W+ 445nm Laser Diode 5.6mm TO-18

  • M140 M-Type Japan 445nm 5.6mm TO-18 Blue Laser Diode.
Check Stock

LIGHTWIN Blue Purple Laser Beams with 600 Lumens Flashlight for Pistols, 3 in1 Laser Light Combo, Tactical Laser Flashlight USB Rechargeable Laser Sight, Strobe & Steady Flashlight for Picatinny Rail

  • 【3 in 1 Laser Light Combo】: Laser class : IIIA.
  • wavelength of the purple laser: 380-470nm, blue laser 445-450nm. Up to 200m range (at night) with 600 Lumens flashlight. Robust anodized aircraft grade aluminum material makes the laser light firm and stable, can stand strong impacts and vibrations, IPX6 Waterproof and lightweight..
  • 【Quick USB Rechargeable】: LIGHTWIN purple and blue laser is bulit-in USB charging. Charging time is only 2 hours. The running times are: 6hr/laser, 1.2hr/light, 55min for both laser and flashlight. When the power is lower than 10%, the low power indicator light will be red, indicating that it’s time to charge in time now.
  • 【10 Sighting Modes + Strobe Function】: 3 in 1 purple blue laser flashlight combo has multiple 10 sighting modes : Purple LASER ONLY / BLUE LASER ONLY / Purple LASER LIGHT / BLUE LASER LIGHT /STEADY LIGHT/STROBE LIGHT / Purple LASER STROBE LIGHT / BLUE LASER STROBE LIGHT / Purple BLUE LASER STEADY LIGHT / Purple BLUE LASER STROBE LIGHT. Press the light button for 3 seconds to switch to strobe mode..
  • 【Windage & Elevation Adjustment】: Elevation(UP/D) adjustment has two adjustment holes, one is purple laser and the other is blue laser. For ....
Check Stock

ATEZR V35 Plus 160W Laser Engraver with KR PRO Chuck Rotary and KA Air Assist, 35W Output Power Laser Cutter, DIY Laser Engraver and Cutter Machine for Wood, Black Acrylic, Metal etc.

  • 【WORLD’S FIRST 35W LASER Engraver】Atezr V35 PLUS 35W Laser Engraver has 160W machine power and 34-36W laser power. This allows ATEZR V35 PLUS laser cutter to cut 18mm paulownia wood, 12mm black acrylic, and a maximum of 30mm paulownia wood, 40mm black acrylic in one go. Atezr V35 PLUS is the first 35W laser engraver on the market today, delivering unrivalled speed and precision for all your engraving needs. From wood to glass, Atezr V35 Plus can handle it all, creating deep, detailed engravings in no time. And, with faster processing times, you can complete engraving jobs quickly and efficiently, allowing you to take on more work and grow your business..
  • 【SUPER ACCURACY - HIGH-QUALITY WORKS】Atezr V35 PLUS Laser Engraver and Cutter Machine adopts spot coupling technology, the laser consists of six beams of diode lasers to achieve ultra-fine compression spots as small as 0.06 x 0.1 mm. You can achieve very sharp and precise lines and contours with Atezr V35 PLUS Laser Cutter, even when working with very complex designs. And a higher compression can provide faster processing times and reduce the likelihood of burning or scorching the material. Higher compression spots can also help reduce the amount o....
Check Stock