Top 1way Of Die

Hornady Match Grade 2 Die Set, 338 LAPUA MAG (.338) (544399) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Match Grade Die 338 LAPUA MAGNUM 2-Die Set (.338) (544399) give you total control over neck tension when resizing. Tight tolerances at the press translate into tighter groups at the range.
  • Find the Match Grade Bushing Dies You Need - these precision dies give the handloader more control over the loading process. They feature self-centering, interchangeable neck sizing bushings, that are held to strict tolerances to provide superior accuracy to eliminate the chance of over-sizing your case necks and overworking the brass (not included with die).
  • Full Length Sizer Die - features precision-polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady....
Check Stock

Hornady Custom Grade New Dimension 2-Die Set, 6.5 CREEDMORE (.264) (546289)- Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die, Sure-Loc Rings, & Storage Box

  • Die Set for the Avid Reloader - hand crafted and polished for an unmatched finish, the Hornady Custom Grade New Dimension 2-Die Set for 6.5 CREEDMORE (.264) (546289) is necessary for each cartridge that you reload to decap, de-prime, resize, and seat/crimp the bullet.
  • Find the Custom Grade Dies You Need - these precision dies give the handloader more control over the loading process. Depending on the caliber of die set/alignment sleeve you are using, the Hornady Crimp/Seater Die will either "taper" or "roll" crimp your cases.
  • Full Length Sizer Die - features a Zip Spindle, with a series of light threads cut on the spindle and spindle collet. This eliminates spindle slippage and makes tightening the spindle lock a breeze when making adjustments.
  • Seating Die - the floating bullet alignment sleeve and stem improve bullet seating and accuracy by pre-aligning the bullet and case before seating. The Hornady bullet seating die also applies a crimp to secure the bullet in the case.
  • Precise Machining for Accurate Reloading - Hornady reloading dies are designed for a true match to your chamber. Keep several appropriate Hornady die sets for each caliber size at your reloading bench. Includes a full length sizer die, seating die, plastic storage box, two Sure-Loc ri....
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

Cuttlebug Cutting Plate B 6'X13'-

  • Can be used on an embossing cutting machine, the transparent durable cutting pad makes it easy to place materials for precise die-cutting..
  • Ensure both sides of the cutting pads are used, to help extend the life of your pads!.
  • The see-through PC plastic allows easy placement of materials for a precise die cut..
  • Allows complex graphics and complex patterns for die-cutting, suitable for small die-cutting machine, they are not suitable for large injection machine..
  • The clear acrylic die cutting plate is made of quality acrylic board, which is very suitable for your cutting and diy use, and it is very practical..
Check Stock

RCBS 20515 Carbide Die Set 9MMLUGER/9x21/9x23,OD Green 9mm Luger

  • Carbide Die Sets consist of a Carbide Sizer Die, Seater Die, and Bullet Seater Plug.
Check Stock

Lionel Racing Kevin Harvick 2019 Busch Harvick Beer 1:64 Nascar Diecast

  • 1: 64 scale die-cast action racing collectables measures 3" X 1.2" X 1".
  • Driver: Kyle Busch | sponsor: intersate batteries | model Year: 2019 | car Make: Toyota | car model: Camry.
  • Finish: Standard | Production Quantity: limited edition.
  • All 1: 64-scale die-cast will come on a base.
  • Each limited edition 1: 64-scale collectible die-cast includes manufacturer-specific engine detail, die-cast body, and detailed interior. Each 1: 64-scale collectible die-cast also features a dintm (die cast Identification number) for registration as well as a silver sticker with 1 of 0000 indicating production run size..
Check Stock

Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT

  • Lathe Tailstock Sliding Tap Die Holder MT2 Shank - Tapping Threading Reaming Drilling - 2MT.
  • ​​​A Tail Stock Tap Die Holder Should Be Among The First Accessories a Machinist Makes For His Lathe, Since Threading With A Hand Held Die Stock....
  • 3 Die Holders Are Interchangeable & Can Hold Die Sizes of 13/16" + 1" + 1-1/2"..
  • 3 Tap Holders Are Interchangeable & Can Hold Taps 0" to 1/4" + 1/4" to 1/2" + 1/2" to 3/4".
  • EXCLUSIVE - TAP AND DIE HOLDER SET - OTHER SIZE MT1 AND MT3 IN OUR SHOP !.
Check Stock

Anna Griffin AG-523H Fancy Flip Card Kit Die Single

  • 20 cards 20 die cut shapes 10 card stock sheets 48 interior sentiment stickers 24 Exterior sentiment stickers 24 Exterior sentiment die cuts.
  • Also includes 72 flower die cuts 48 foil stamped corners 30 foil die cuts 1 mat 1 set of dies 150 foam adhesives 30 envelopes perfect for any crafter.
Check Stock

Hornady Lock-N-Load Die Bushings, 10 Pack – Change Dies Quickly with a Simple Twist – Compatible with All Reloading Presses - Item No. 044096

  • Hornady Lock-N-Load Die Bushings – The Lock-N-Load bushing system will forever change the way you switch from one caliber to another. Lock-N-Load technology allows you to change dies and start loading another caliber in a matter of seconds. Includes 10 die bushings.
  • Maximize Reloading Time – Quickly and easily change from one die to another with a simple twist.
  • Positive Locking Action – Holds the dies in perfect alignment. Compatible with all Hornady Reloading Presses.
  • The Easy Way – Get the most out of your reloading press. Change the caliber by a simple twist of the die counterclockwise.
  • How to Use – Thread your die (7/8"-14 thread) into the Lock-N-Load Die Bushing and insert the assembly into the press bushing. Twist it clockwise to lock it in to position, then adjust your die as usual and tighten the lock ring.
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

18V OCTANE Brushless 1/2 in. High Torque 6-Mode Impact Wrench

  • ULTIMATE PIPE THREADER SET: Dependable, heavy-duty construction tools including die heads, ratchet assembly, ratchet handle, alloy dies, and a coordinating carrying case for organized use on job sites.
  • DESIGNED FOR EASE OF OPERATION: Makes threading pipe or conduit quick and effortless and uses individual die heads for each pipe size and manually operated ratchet.
  • DUCTILE CAST IRON DIE HEADS: Kit includes 1/2-in., 3/4-in., 1-in., 1-1/4-in., 1-1/2-in., and 2-in. sized die heads, and all of the sizes fit in the ratchet without any additional pieces.
  • CONVENIENT CARRYING CASE: Lightweight yet rugged carrying case accommodates all dies heads in the set to keep them organized and together and features labeled compartments for clear identification.
  • 1/8"-2" PIPE CAPACITY: Works with any 12-R die heads with a 1/8-in. to 2-in. pipe capacity, all threader sets use the same 12-R dies in die head.
Check Stock

302 Stainless Steel Round Shim, Unpolished (Mill) Finish, Hard Temper, ASTM A666, 0.40mm Thickness, 8mm ID, 10mm OD (Pack of 25)

  • Die Button Shims quickly adjust the height of sharpened die buttons.
  • Made from a 302 full hard stainless steel.
  • Easily extends the "life" of a die button and saves time over hand punching custom shims.
  • Large I.D. accommodates multiple size die openings and reduces the risk of "slug stacking".
Check Stock