Top 2 0 Channel Amplifier Audio

Rockville HTS45 800w 5.1 Channel Bluetooth Home Theater Audio System+Subwoofer

  • 6 RCA DVD Audio Inputs. 2 RCA AUX Inputs. FM Antenna Input. Full Function Remote. Zero distortion can be heard even with volume and bass settings all the way up! The sound on this system is better than anything even that cost twice the price! Frequency Response: 300Hz – 20KHz. Amplifier: Class AB, very efficient amplifier with top components! Signal to noise ratio: ≥50dB. Max SPL: 106 dB @ 1w/1m. Input voltage: AC 120V/60Hz. Subwoofer Dimensions in Inches: 6.69” W x 13.58" D x 12.20” H. Satellite Speaker Dimensions in Inches: 4.53” W x 3.54" D x 7.87” H. Net Weight: 18.56 LBS (Shipping Weight: 20.98 LBS).
Check Stock

Pyle 2-Channel Marine Amplifier Receiver - Waterproof and Weatherproof Audio Subwoofer for Boat Stereo Speaker & Other Watercraft - 600 Watt Power, Wired RCA, AUX and MP3 Audio Input Cable - PLMRMP2A

  • WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-65. It has a rugged construction and integrated power wiring harness to combat weather conditions.
  • POWERFUL 600 WATT: This amplifier receiver is powerful with its 600 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control.
  • 2 CHANNEL AMPLIFIER: Pyle’s PLMRMP2A is engineered as a 2-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input.
  • SHORT PROTECTION: Built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. It has 12V DC and 10A fuse.
  • COMPACT AND LIGHTWEIGHT: The amp is compact with an exact dimension of 5.3’’ x 3.5’’ x 2.1’’ and lightweight with only 1.94 lbs. The T.H.D is 0.1%, S/N Ratio is 003e 95 dB, channel separation is 003e 65 dB and the frequency response is 10 - 40kHz.
Check Stock

ALPINE S-A32F 320w RMS 4-Channel S-Series Car Audio Amplifier Class D+Amp Kit

  • (1) Alpine S-A32F 320 Watt RMS 4-Channel S-Series Car Audio Amplifier Class D Amp. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. Install. Terminal Layout: One side. Small footprint for easy installation. Screw terminals (for speaker and power cables). General. Amplifier Type: Class-D (Digital). Channel Design: 4/3/2 Channel. Thermal Management Control. Top Mounted LED Power/Status Indicator. Speaker Level Input with remote turn on.
  • Crossover: Adjustable Low-pass (LPF) / High-pass Filter (HPF). Gain Control: Adjustable. Bass Control: Remote Bass Control (RUX-KNOB2) Ready. Max Power Output Ratings. Total Max Power: 640W. RMS Power Ratings. Per Channel into 2 Ohms, 14.4V (%THD+N): 4 x 80W. Per Channel into 4 Ohms, 14.4V (%THD+N): 4 x 55W. Bridged into 4 Ohms, 14.4V (%THD+N): 2 x 160W. Sound Tuning. Crossover: Variable LPF, 50-400Hz (-12dB/oct ). Crossover: Variable HPF, 50-400Hz (-12dB/oct ). General.
  • Power Requirements: 14.4 V.DC (9 - 16 V allowable). Input Sensitivity (RCA Input): Hi: 0.5 - 10 V Lo: 0.2 - 4.0 V. High Level Input with automatic power on. Cable size: Power Cable AWG 8, SPK Cable AWG 10. Frequency Response (+0, -....
Check Stock

MUSYSIC MU-D16K Professional 2-Channel 2x8000 Watts D-Class 1.5U Power Amplifier

  • 2-Channel Professional D-Class Power Amplifier 2x8000 Watts Peak Output.
  • Stereo Output Power: "2x8000W PEAK, 2x4000W Program, 2x2000W RMS @ 2Ω" "2x4000W PEAK, 2x2000W Program, 2x1000W RMS @ 4Ω" "2x2000W PEAK, 2x1000W Program, 2x500W RMS @ 8Ω" / Bridge Output Power: "8000W PEAK, 4000W Program, 2000W RMS @ 4Ω" "4000W PEAK, 2000W Program, 1000W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 90v-250v 50Hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio frequency protecti....
Check Stock

Pyle 4-Channel Marine Amplifier Receiver - Waterproof and Weatherproof Audio Subwoofer for Boat Stereo Speaker & Other Watercraft - 1200 Watt Power, Wired RCA, AUX and MP3 Audio Input Cable - PLMTR4A

  • WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade rating of IP-65. It has a rugged construction and integrated power wiring harness to combat weather conditions.
  • POWERFUL 1200 WATT: This amplifier receiver is powerful with its 1200 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control.
  • 4 CHANNEL AMPLIFIER: Pyle’s PLMTR4A is engineered as a 4-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input.
  • SHORT PROTECTION: Built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. It has 12V DC and 10A fuse.
  • COMPACT AND LIGHTWEIGHT: The subwoofer amp is compact with an exact dimension of 6.2’’ x 3.5’’ x 2.1’’ and lightweight with only 2.29 lbs. The T.H.D is 0.1%, S/N Ratio is > 95 dB, channel separation is > 65 dB and the frequency response is 10 - 40kHz.
Check Stock

Pyle Auto 2-Channel Marine Amplifier - 200 Watt RMS 4 OHM Full Range Stereo with Wireless Bluetooth & Powerful Prime Speaker - High Crossover HD Music Audio Multi Channel System PLMRMB2CB Black

  • WIRELESS BLUETOOTH CONNECT: This bluetooth is built in with 2. 0 version and with the wide range that could reach up to 30’ + feet even on underwater. It has power protection circuitry and electronic high crossover network that bridge.
  • COMPACT AND POWERFUL: This bridgeable multi-channel amp is prime class and slim pack with 2x100 Watts RMS @ 4Ohm, 2x 200Watt MAX @ 4Ohm and 2x300 Watt RMS @ 2 Ohm and has wire auxiliary RCA audio connection and integrated cable for easy installation..
  • WORKS TO ALL DEVICES: This powerful multi 2-channel marine and car amplifier can immediately connect to all of your favorite gadgets such phone, ipod, iphone, android, tablet and can be used for boat or aquatic vehicle application or in your car..
  • WEATHERPROOF WATER RESISTANT DESIGN: This extremely efficient, 2 channel, 200w outdoor amp is fully marinized with a waterproof and rust resistant coating on the PCB and mechanical casing. Truly, lives the one and only legacy of an auto amplifier..
  • INCOMPARABLE SPEAKER: This latest 200watt 2 channel subwoofer amplifier takes your small vehicle’s no filter music audio system to the next level. It is install with full HD sound, bass control and LED lights indicator that your stereo is working..
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • Power – This Class A/B 1400 Watt Car Amplifier has a power rating distribution as followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease....
Check Stock

MUSYSIC MU-D9600 Professional 4-Channels 2x9600 Watts D-Class 1U Power Amplifier

  • 4-Channels Professional D-Class Power Amplifier 2x9600 Watts Peak Output.
  • Stereo Output Power: "4x4800W PEAK, 4x2400W Program, 4x1200W RMS @ 2Ω" "4x2400W PEAK, 4x1200W Program, 4x600W RMS @ 4Ω" "4x1200W PEAK, 4x600W Program, 4x300W RMS @ 8Ω" / Bridge Output Power: "2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 4Ω" "2x2400W PEAK, 2x1200W Program, 2x600W RMS @ 8Ω".
  • Frequency Response: 20Hz-20KHz,+0,-1dB at watts / THD+N(20Hz-20KHz) ＜0.23％20Hz-20KHz / Siew Rate ＞30V/us / Damping Factor ＞150 / Output Circuitry Class AB / Signai to Noise Ratio ≥96dB / Cross Talk ＞80dB / lnput Sensitivity(8Ω) 1V / input lmpedance 20 k Ω baiance / 10 k Ω unbalanced unbalance balancing 20 k / 20 k /.
  • Three cooling fans / Connectors Input: XLR input, 1/4" input: Speakon connector Output: Speakon, locking type socket, Power Requirements: 115v-230v 50/60 hz.
  • Controls Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ lndicators Panel: the power switch, channel 1 and channel 2 channel gain control.
  • After the board: working mode, pressure limit./ Amplifier Protection With short circuit, overload, overheat, cut peak pressure limit, dc, soft start, relay zero current switch, super audio and radio fre....
Check Stock

Car Stereo Audio Speak Signal Hi-Low Converter for Auto Amp Subwoofer Amplifier CD Player High to Low Adapter

  • 【Car Audio Signal Hi-Low Converter】 It converters car stereo's high audio signal(R+, R-, L+, L-, Ground) to low RCA signal(left & right channel)..
  • 【Amplifier Modify Accessory】 This adapter is suitable for car stereos without RCA output to connect with the after-market amplifier. Although some amp has Hi-Low Convert function, we strongly recommend to have such an external converter to avoid the interference of the conversion inside the amp. Especially useful for CD radio stereo without Line Out port..
  • 【How to Connect】Easy to install: Green wire connect to the Left channel negative. Yellow wire connect to the Left channel positive. Gray wire connect to the Right channel negative. Purple wire connect to the Right channel positive. Black wire connect to Ground..
  • 【Product Dimensions】 Compact sized: 6.4 x 4.3 x2.5 cm/2.52 x 1.7 x 0.98 inch. The shell made by metal, reliable and strong..
  • 【Reliable Service】Ready to respond within a 24 hour time frame. 30-Day money back guarantee, 12 month replacement and lifetime Support..
Check Stock

MUSYSIC MU-D8500 Professional Amplifier – D Class Dual Channel Power Amp, High Performance 8500W 1U Chassis Amplifier with XLR & 1/4 inch Inputs for Home Speakers, Theatre, etc. with Audio Filtering

  • Take your audio experience to the next level with the MUSYSIC 2 Channel Amplifier. This high-performance amplifier is equipped with 3 Step audio filtering and low-voltage power on function to deliver outstanding sound quality, making it the perfect choice for music lovers, audiophiles, and professional audio engineers alike. Its frequency response ranges from 20Hz to 20KHz..
  • With UP TO 4800W PEAK, 2400W Program, 1200W RMS of clean output power @ 4ΩBridge AND 2x4800W PEAK, 2x2400W Program, 2x1200W RMS @ 2ΩStereo the [MU-D8500] Amplifier delivers powerful, distortion-free sound that will fill any room. Its Class D Protection Circuit helps to achieve tailored outputs. Whether you're listening to music, watching a movie, or playing a video game, you'll experience rich, detailed sound that will bring your audio to life..
  • The MUSYSIC MU-D8500 Amplifier is designed with versatility in mind. It features both XLR and 1/4-inch TRS inputs, and Speakon, Banana binding post outputs on each channel so you can easily connect a variety of audio sources, from turntables and CD players to smartphones and laptops. It has high and low pass filters for matching output to any loudspeaker. Comes with 5 Power Outputs based on the connections you make. (Specifications mentio....
Check Stock

Pyle 2-Channel Marine Amplifier Receiver - Waterproof and Weatherproof Audio Subwoofer for Boat Stereo Speaker & Other Watercraft - 400 Watt Power, Wired RCA, AUX and MP3 Audio Input Cable

  • WATERPROOF & WEATHERPROOF: The audio amplifier is waterproof with its marine grade protection. It has a rugged construction and integrated power wiring harness to combat weather conditions as well.
  • POWERFUL 400 WATT: This amplifier receiver is powerful with its 400 watt max. It has an anti-thump turn on and soft turn on or off to save energy. Comes with 2 to 4 Ohm speaker impedance and adjustable volume control.
  • 2 CHANNEL AMPLIFIER: Pyle’s PLMRMP1B_0 is engineered as a 2-channel marine amplifier that powers up any boat stereo speaker and is universally compatible too. It has wired RCA, AUX and MP3 audio input.
  • SHORT PROTECTION: Built with a heavy duty heatsink, thermal overload speaker short protection to protect the amp and your vehicle's electrical system from short circuit conditions. It has 10A fuse.
  • COMPACT AND LIGHTWEIGHT: The amp is compact with an exact dimension of 4.13'' L x 3.35'' W x 1.38'' H and lightweight with only 1.89 lbs. The frequency response is 10Hz - 40kHz.
Check Stock

Car Audio Noise Isolator Filter Radio Noise Eliminator for Auto Truck Boat Speakers Amplifier Equalizer RCA Signal

  • 【Professional Audio Noise Isolator】Eliminates DC Current from the car audio RCA input. Eliminates ground loop noise from radio pre-amp outputs.....
  • 【Application Scenario】This audio noise isolator is especially useful when your car is equipped with a power amplifier or subwoofer. Also works on....
  • 【How to connect】Input Ports: white for right channel, red for left channel. Output Ports: white for right channel, red for left channel..
  • 【Product Dimensions】 6.4 x 4.3 x2.5 cm/2.52 x 1.7 x 0.98 inch. The shell made by metal, reliable and strong..
  • 【Reliable Service】Ready to respond within a 24 hour time frame. 30-Day money back guarantee, 12 month replacement and lifetime Support..
Check Stock