Top 2 5 Inch Hard Drive Bracket

StarTech.com 3.5' to 5.25' Front Bay Adapter - Mount 3.5' HDD in 5.25' Bay - Hard Drive Mounting Bracket w/ Mounting Screws (BRACKETFDBK)

  • TAA Compliant: This TAA compliant 3.5" to 5.25" hard drive mounting bracket adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases..
  • Easy to use: The front bay hard drive mounting bracket lets you install a 3.5" floppy drive, external facing USB hubs, media card readers, and fan controllers into the front bay of your computer..
  • Sturdy design: The 3.5" to 5.25" front bay bracket features an attractive open-faced black bezel that provides a secure fit..
  • Easy installation: This hard drive mounting bracket comes complete with 4 x mounting screws for a hassle-free installation..
Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

ORICO 3.5 Hard Drive Enclosure Type-C to SATA III Aluminum 5 Bay Raid External HDD Enclosure Up to 80TB Support RAID 0/1/3/5/10/JBOD/ClONE/Normal-WS500RC3

  • ...enclosure adopts high performance master control scheme, and set with SATA3.0 interface, the data transfer rate of the sata 3 enclosure can reach up to 5Gbps with the A to C data cable, which can effectively improve the rate by about 20% than USB2.0.
  • [Screw Installation] - You need to loosen the cover screws and the bracket screws when install your hard drive in the drive bay enclosure. Multi protection for the hard drive and the data safety, flexible the open and install way of the 5 bay hdd enclosure, ensure the data in a safe environment.
Check Stock

Zerone 5.25 to 3.5 / 2.5 Bay Mounting Bracket Kit 5.25 Bay SSD to Dual 2.5 HDD/SSD & One 3.5 HDD/Device Front Bay with Mounting Screws

  • [Good Function] This plastic, floppy-drive adapter bracket lets you install 2.5inch / 3.5inch floppy drives into a 5.25 inch bay..
  • [Value Upgrade Of PC Drive Bay] Included mounting screws. Comes with a baffle. Multifunctional combination to improve the use value of PC drive bay..
  • [Practical] Fits 2 x 2.5 inch HDD / SSD + 1 x 3.5inch HDD..
  • [High Quality] Made from engineering plastics, strong and durable, which can support long time use..
  • [Wide Compatibility] This floppy-drive bracket is compatible with standard 5.25inch bay of PC..
Check Stock

ORICO USB 3.0 to SATA External Hard Drive 5 Bay Docking Station with Duplicator Offline Clone Function for 2.5 or 3.5in HDD, SSD Support 5X 10 TB

  • 1.【50TB Large Capacity & Compatible 2.5/3.5 inch HDD SSD】: External 5 Bay hard drive docking station support up to 50TB (5x 10TB hard drives), compatible with 2.5 inch / 3.5inch SATA I II III HDD SSD hard drives, Perfect solution for backup and processing IT data, batch processing data, formatting, file transfers, data recovery, gaming data backup, etc..
  • 2.【Offline Clone and Duplicator 】: The Orico 5 Bay External hard drive docking station can be used to Offline offline cloning / Duplicator from an source hard drive to target disk without connecting to a computer, or as external storage to transfer data between a hard drive and your computer..
  • 3.【USB 3.0 Hard Drive Dock Superspeed up to 5 Gbps】: SuperSpeed USB 3.0 Hard Drive Enclosure DOwith data transfer rates up to 5Gbps, support UASP Protocol. 20% faster than the traditional USB 3.0, and backward compatible with USB2.0 and USB1.1..
  • 4.【Tool-free & 180° Heat dissipation Function】Plug and Play, No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation. Hard Drive Stock With the movable design, the hard drive is more stable and Open-type design brings better heat dissipation function..
  • 5.【Compatible Operating System】: The 5 Bay HDD SSD Docking Station....
Check Stock

SSD Bracket 2.5 to 3.5 Adapter 2Pack, Hftywy SSD Mounting Bracket Kit 2.5 to 3.5 SSD HDD Hard Disk Drive Bays Holder Metal Mounting Bracket Adapter with Screws for PC SSD

  • ★ 2.5 to 3.5 Hard Drive Adapter SSD Bracket Converts 2.5" Notebook Hard Drive to 3.5" Desktop Hard Drive Bay Mounting Bracket Adapter.
  • ★Precise Fit- 4 screw holes are designed on the Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
  • ★Specifically designed for SSD drives. Optimise your PC performance and make the most of the internal space inside your PC..
  • ★Using precision die stamping, great assemblability, easy to install. 2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
  • ★Package includes 2Pack of Hard Drive Holder, and 1 x screw driver and all screws needed..
Check Stock

SSD Bracket 2.5 to 3.5 Adapter, FXAVA SSD Mounting Bracke SSD Bracket 2.5 to 3.5 Adapter SSD HDD Metal Mounting Bracket Adapter Hard Drive Holder for PC SSD 2Pack

  • 2.5" To 3.5" - 2.5" To 3.5" Mounting Adapter Bracket SSD Caddy, Support 2.5" hard drives (SSD and HDD) of laptop, compatible with SATA I, SATA II, SATA III..
  • SCREWS INCLUDED- 16 pcs(8pcs per adapter) screws included for each 2.5 to 3.5 bracket to ensure you can mount the bracket onto the PC case. 4 screw holes are designed on the SSD Bracket Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
  • Easy to install 2.5" to 3.5" mounting adapter bracket. Suitable for HDD/SSD.
  • Metal Material- Our ssd mounting bracket is made of metal,which could strengthen the heat-sinking capability, so provides your hard drive a full protection..
  • Package Include: 2 x ssd mounting bracket 2.5 to 3.5 , 16x Screw.
Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

  • You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
  • Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
  • Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
  • Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
  • Made of plastic body,quick and easy installation.
Check Stock

Tewmsc 2.5 to 3.5 Hard Drive Adapter SSD Mounting Bracket 2.5\ to 3.5\ Drive Bay Metal Adapter Mounting Bracket Hard Drive Holder with 5pcs Reusable Cord Organizer

  • Metal Material- Our ssd adapter 2.5 to 3.5 is made of metal,which could strengthen the heat-sinking capability, so provides your hard drive a full protection..
  • 2.5 to 3.5 Adapter - 2.5" To 3.5" Mounting Adapter Bracket SSD Caddy, Support 2.5" hard drives (SSD and HDD) of laptop, compatible with SATA I, SATA II, SATA III..
  • PRECISE FIT- 4 screw holes are designed on the ssd bracket, which precisely corresponds to the 4 screw holes on the hard drive..
  • SCREWS INCLUDED- 16 pcs(8pcs per adapter) screws included for each 2.5 to 3.5 bracket to ensure you can mount the bracket onto the PC case..
  • Package Include: 2 x ssd mounting bracket 2.5 to 3.5 , 16x Screw, 5pcs colorful Reusable Cord Organizer.
Check Stock

ORICO 5 Bay Docking with Clone USB 3.0 to SATA External Hard Drive 5 Bay Docking Station with Duplicator Offline Clone Function for 2.5 or 3.5in HDD/SSD Max Support 5X 16TB [6558US3-C]

  • 【80TB Large Capacity & Compatible 2.5/3.5 inch HDD SSD】: External 5 Bay hard drive docking station support up to 80TB (5x 16TB hard drives), compatible with 2.5 inch / 3.5inch SATA I II III HDD SSD hard drives, Perfect solution for backup and processing IT data, batch processing data, formatting, file transfers, data recovery, gaming data backup, etc..
  • 【Offline Clone and Duplicator 】: The Orico 5 Bay External hard drive docking station can be used to Offline offline cloning / Duplicator from an source hard drive to target disk without connecting to a computer, or as external storage to transfer data between a hard drive and your computer..
  • 【USB 3.0 Hard Drive Dock Superspeed up to 5 Gbps】: SuperSpeed USB 3.0 Hard Drive Enclosure DOwith data transfer rates up to 5Gbps, support UASP Protocol. 20% faster than the traditional USB 3.0, and backward compatible with USB2.0 and USB1.1..
  • 【Tool-free & 180° Heat dissipation Function】Plug and Play, No reboot and additional driver needed, hot-swapping, easy and quick Tool-Free installation. Hard Drive Stock With the movable design, the hard drive is more stable ....
Check Stock

KOOBOOK 2Pcs 5.25\ to 3.5\ 2.5\ SSD HDD Tray Caddy Case Adapter Hard Disk Drive Bays Holder Cooling Fan Mounting Bracket for PC

  • You can use it for 1 drive,2.5" SSD or 3.5" HDD.Supports computer cases with an available 5.25 inch drive bay.
  • allow to Mount 1x 3.5 - inch （or 2.5 inch or SSD）Drive and 1x 12cm fan..
  • Above Install hard disk , below install the fan. Make sure the hard disk high speed read and extend drive life..
  • when you install a fan, it will account more than a optical drive..
  • This adapter can adapts any 2.5" or 3.5" form factor drive to 5.25" drive tray..
  • Dimension 145 x 120 x 8mm(L x W x H)/ approx. 5.71 x 4.72 x 0.31 inch..
Check Stock

ORICO 5 Bay Raid Hard Drive Enclosure Magnetic Aluminum USB 3.0 to SATA for 3.5 inch HDD Tool Free Storage Case Support 7 RAID Modes Up to 80TB(5X16TB) - NS500RU3

  • ... LARGE CAPACITY -- Every single disk of the 3.5 usb raid enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
  • QUALITY CHIP CONTROL -- The 5 bay usb enclosure adopts three high quality chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
  • GOOD HEAT DISSIPATION PERFORMANCE -- A 92mm cooling fan built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external raid enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard drive..
  • 12 MONTH QUALITY ASSURANCE WITH LIFETIME TECHNICAL SUPPORT - All ORICO products purchased through Amazon include an 12-month quality assurance and lifetime technical support. If for any reason, you are dissatisfied with the product, just....
Check Stock