Top 2 5 Inches Sata

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

GELRHONR 15Pin SATA Male to 5 x 15 Pin SATA Female Hard Drive Power Right Angle Splitter Adapter Cable Extension Cable for Hard Disk 50CM

  • ✪ 15 Pin SATA to 5 x 15 Pin SATA Right Angle Power Cable Adapter:Converts one 15pin SATA plug into 5 x 15-pin SATA adapter.It works well connected to the sata socket of the power supply and allows you to connect up to 5 hard drives and ssd or other components that require the use of the SATA socket for operation..
  • ✪ This is a quite useful product when faced with not enough SATA power connectors. Upgrades your PC, Compatible with 2.5-inch SSD/3.5-inch hard drives/optical drives, CD Drives, optical DVD Drives, Bluray Drives,etc..
  • ✪ Right Angel Flexible Cable:The sata cable is right angel parallel design ,neat and flat.Easily add this cable adapter to your computer case, do not cover the network and not spread, the wire clean with convenient wiring perforation..
  • ✪ PRODUCT ADVANTAGE:The sata adapter cable is use lossless piercing wiring technology,no degumming,and no burrs.Strong toughness and wear resistance.The interface is designed according to the standard,easy to plug and unplug.High speed to transfer dataThe contact has good contact and will not cause poor contact..
  • ✪ Be note:The 15pin SATA Male 1 to 5 Female SATA 15pin Splitter cable was only designed for the devices with SATA port, not compatible with other ports. If you connect it with oth....
Check Stock

COMeap 6 Pin to 3X 15 Pin SATA Hard Drive Power Adapter Cable for Some Types of Thermaltake Modular PSUs 20-in(50cm)

  • ...5 Pin SATA port to plug into hard drive, riser card or other devices with SATA port.
  • 『Connector』Connector A: 6 pin male(only for some types of Thermaltake PSUs as listed), Connector B: 3x SATA 15 pin female.
  • 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm), Quantity: 1pcs, Self-adhesive tape*1pcs.
Check Stock

Tripp Lite B020-U16-19-K 16-Port Console KVM Switch w/ 19' LCD & 8 PS2/USB Combo Cables

  • 【HIGH-QUALITY MASTER CHIP】Use high-quality master chip. In addition to electrolytic capacitors and high-voltage ceramic capacitors for high-quality network cards, most other resistor components also use SMT chip components, which are more reliable and stable than plug-ins..
  • 【STRONG ANTI-INTERFERENCE ABILITY】The gold finger of this product is made of gold, which not only increases its own anti-interference ability, but also reduces the interference to other devices. At the same time, the nodes of the golden finger adopt circular arc design..
  • 【SUPPORT UP TO 2TB SATA HDD (2.5" AND 3.5")】Connect the SATA HDD (without IDE) to your console, and then use the loader to play games without HDD discs. Sata network adapter can support up to 2TB SATA HDD (2.5 inches and 3.5 inches)..
  • 【WIRELESS NETWORK ADAPTER】This product is used for the SSPH-10350 SATA network adapter of the PS2 console. This is a wireless network adapter. You cannot connect the network cable..
  • 【EASY TO INSTALL】The network adapter is used to connect the SATA hard disk, which can be easily installed within a few minutes, no experience is required, and it is made of high-quality ABS and metal, and is durable..
Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
  • 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check Stock

SABRENT USB 3.1 to SATA Dual Bay Hard Drive Docking Station for 2.5 or 3.5 inches HDD, SSD

  • Supports Standard Desktop 2 5 inches /3 5 inches SATA Hard Drives or SSD.
  • Reverse compatible with USB 1 1 and USB 2 0 and USB 3 0.
  • Hard Drive Duplicator/Cloner Function (Includes Both Type C and Type A Cables Supports 10TB+ Drives) (DS-UTC2).
Check Stock

FebSmart PCIE to 6-Ports SATA 3.0 6Gbps Max Speed Expansion Card for PCs, Servers, NAS-Plug and Play on Windows, MAC OS, Linux System-ASMedia ASM1166 Non-Raid PCIE 3.0 SATA Controller (FS-S6-Pro)

  • 1.The FS-S6-Pro is a PCI express 3.0 X4 interface to 6-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 6X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Working Stations, MAC Pros and Network Attached Storage (NAS)..
  • 2.Select the ASMedia ASM1166 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X4 interface provide 16Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • 3. Plug and Play on Windows Server 2019, 2016, 2012R2, 2012, 2008R2, 2008, 2003R2, 2003 (32/64), Windows XP, Vista, 7, 8.x, 10 (32/64bit), MAC OS 10.4.x, 10.5.x, 10.6.x, 10.7.x, 10.8.X, 10.9.x, 10.10.x, 10.11.x, 10.12.x, 10.13.x, 10.14.x, 10.15.x and most of Linux kernel systems..
  • 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on motherbaord PCIE X4, X8, X16 slot..
  • 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 6X max SATA interface power connector.3. Users must make sure PCs/Motherboards have at least one PCIE X16....
Check Stock

FebSmart PCIE3.0 to 4-Ports 6Gbps SATA 3.0 Expansion Card for PCs, Servers, NAS, MAC Pros-Plug and Play on Windows, MAC OS, Linux System-ASMedia ASM1064 Non-Raid PCIE 3.0 SATA Controller (FS-S4-Pro)

  • 1.The FS-S4-Pro is a PCI express 3.0 X1 interface to 4-Ports 6 Gbps max speed SATA 3.0 expansion card. It allows users add 4X Non-Raid SATA 3.0 Storage or AHCI Boot HDD/SSD on desktop PCs, Servers, MAC Pro and Network Attached Storage (NAS)..
  • 2.Select the ASMedia ASM1064 the most stable Non-Raid PCIE 3.0 SATA controller solution. PCIE 3.0 X1 interface provide 8Gbps total bandwidth. Each SATA 3.0 port will get 6Gbps max speed for AHCI boot and storage..
  • 3. Plug and Play on Windows Server 2019,2016,2012R2,2012,2008R2,2008,2003R2,2003(32/64), Windows XP, Vista,7,8.x,10(32/64bit), MAC OS 10.4.x,10.5.x,10.6.x,10.7.x,10.8.X,10.9.x, 10.10.x, 10.11.x,10.12.x,10.13.x, 10.14.x,10.15.x and most of Linux kernel systems..
  • 4.Compliant with Serial ATA(SATA) Revision 3.1 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backward compatible with SATA 1.0 and SATA 2.0. Support PCIE 1.0,2.0,3.0,4.0 protocol on PCIE X1, X2, X4, X8, X16 slot..
  • 5.Warning: 1. This SATA card was set on AHCI Boot mode, make sure now PCs in AHCI Boot Up mode or will report Blue Screen Death.2. Please make sure users power supply unit (PSU) can provide 4X max SATA interface power supply for HDD/SSD.3. Users must make sure PCs/Motherboards have at least one PCIE slot before purchase.4. Slim ....
Check Stock

Startech.com Usb3sdockdd Usb 3.0 Laptop Docking Station

  • BROAD DRIVE COMPATIBILITY: Standalone 1-to-1 duplicator and eraser for M.2 PCIe NVMe (M-Key), M.2 SATA AHCI (B+M-Key), SATA 2.5/3.5" drives.
  • Duplicate between M.2 NVMe/SATA & 2.5/3.5" SATA drive interfaces.
  • CONFIGURABLE DUPLICATION MODES: Solid State Drive (SSD)/Hard Disk Drive (HDD) cloner supports multiple modes: System & File, All Partitions, Whole Drive & Percentage Duplication.
  • Adjustable Host Protected Area (HPA) settings to include/exclude partitions.
  • CONFIGURABLE ERASE MODES: Drive wiper w/ 5 erase modes: Quick Erase, Full Erase (Single & 3-Pass), Secure Erase (Clear/Purge, meets NIST SP 800-88 Rev 1).
  • Upgradeable firmware complies with future DOD & Government standards.
  • EASY TO USE: External drive duplicator/sanitizer has intuitive button-operated interface w/ full on-screen display (OSD) for increased manageability.
  • Menu incl: Error Reporting, Present Drive Info.
  • LED indicators (Power/Activity, Status, Error).
  • WIDE COMPATIBILITY: M.2 NVMe duplicator supports M.2 NGFF SSDs sized 2230/2242/2260/2280/22110.
  • M.2 NVMe & M2 SATA drives incl. Samsung 850/860/870/950/960/970, WD, HP, & Intel.
  • Supports IDE/mSATA using SAT2IDEADP/SAT32MSAT25....
Check Stock

COMeap HDD SATA Power Cable Right-Angle SATA 15 Pin x2 to Mini 6 Pin ATX Adapter for Dell Inspiron 3653 3650 Series Compatible Part No. GP2JM 14.5-inch(37cm)

  • ... mini 6 pin port, not standard 6 pin port.), 15 Pin SATA port plugs into the hard drive.
  • Compatibility』Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668.
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm), Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • ( Please purchase the mini 8 pin to SATA adapter for DELL OptiPlex series, the link is https://www.amazon.com/dp/B07Z2GBR25 ).).
Check Stock

High Point RocketRAID 640L Internal 4 SATA Port PCI-Express 2.0 x4 SATA 6Gb/s RAID Controller -Lite Version

  • Bios boot to RAID with point-to-point connectivity or through port Multiplier.
  • Quick, background or foreground initialization.
  • Oce/orlm (online capacity expansion/online RAID level Migration).
  • Supports up to 4 SATA 6Gb/s and 3Gb/s HDD/SSD.
  • Driver support for Microsoft Windows 7, 2008, Vista, and Linux distributions.
Check Stock

COMeap Motherboard ATX Mini 8 Pin to 2X Right-Angle 15 Pin SATA Hard Drive HDD Power Adapter Cable for Dell OptiPlex Series 3020 5040 7020 9020 14.5-inch(37cm)

  • 『Connectors』Connector A: ATX 12V mini 8 pin (NOTE: not standard 8 pin), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and a ssd).
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm).
  • 『Note』This cable was only designed for some types of DELL OptiPlex series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • 『Compatibility』Compatible with DELL OptiPlex series such as 3020/3040/5040/7020/7040/9020 MT, T1700MT.
  • 『Mini 8P – 2x Right-Angle SATA』Mini 8 Pin port plugs into the motherboard (NOTE: It is mini 8 pin port, not standard 8 pin port.), 15 Pin SATA port plugs into the hard drive.
Check Stock