Top 2 5mm Connector

KeeYees 60pcs 5mm Pitch 2 Pin & 3 Pin PCB Mount Screw Terminal Block Connector for Arduino (50 x 2 Pin, 10 x 3 Pin)

  • Package include: 50pcs 2 Pin Screw Terminal Block Connector.
  • 10pcs 3 Pin Screw Terminal Block Connector.
Check Stock

5Pairs EC5 Battery Connector Plugs Gold Bullet Male Female 5.0mm Banana Plug Connectors for RC ESC Lipo Battery Device Electric Motor

  • EC5 Style 5mm Battery Connector Plugs - 10 Plugs Total, 5 Male and 5Female Pieces.
  • 5mm gold-plated bullet banana connector plug , good conductivity and continuous stability, the coating protect banana plug from oxidation and extend its life.
  • Stronger Split Bullet Style Male End - Provides a secure connection for battery and motor, designed with convenience and reliability in mind.
  • EC5 Connector for RC hobby, car, boat, plane, helicopter, and Li-polymer battery, etc.
  • High Current - Fits up to 10 awg wire.Protected to avoid shorting and reverse polarity.
Check Stock

AspenTek DC 12V Power Supply Adapter with Inline on Off Switch for Small Led Light Strips,Led Rigid Bars,Led Tape Lights, Under Cabinet Lighting, Output 1000mA, 12 Watt Max

  • 12v power supply with switch inline the 1.2meters/3.8feet US plug cable.
  • easy to turn on and turn off your device.
  • NOT suitable for one roll 16.4 Feet led strip light( Mainly designed for small LED lighting products that draw any amount of power up to 12 watts.
  • It also can be applied to some many small electrical appliances DC CCTV Cameras,IR cameras,massage,etc ).
  • If the power of led light is over 12watts, the led light will flash since the power supply can not offer enough power for the light, in this case, please contact us via email,we will recommend you suitable power adapters.
  • Safety circuit protection function:short circuit,over current,over voltage,over load.
  • Converts from 110 VAC wall outlet into a 12 Volt DC plug(2.1x5.5mm male).
  • Plug and play with 2.1x5.5mm female plug(NOT suitable for 2.5x5.5mm female plug).
  • Comes with a female screw post plug(2.1x5.5mm), you may wire your led light in this connector and then plug it to the power supply.
Check Stock

Extra Large Blood Pressure Cuff Arm, 8.6''-20.4'' Extra XL Replacement Cuff Compatible with All Omron Blood Pressure Machine (BP Machine Not Included)

  • ✅【Adjustable Large Cuff】Eatures a D-ring to adjust blood pressure machine cuff size. Suit adult arm 8.6-20.4 inches (22-52 cm) in circumference..
  • ✅【Compatibility Design】The replacement large cuff is suitable for all blood pressure monitors which bp machine connect hole is 0.27/0.23/0.19/0.15 inches (4mm/5mm/6mm/7mm). Easy installation and adjustable..
  • ✅【Comfortable Arm Cuff】Constructed with comfortable nylon material, with TPU airbag is non-toxic and tasteless. Nylon soft hook Velcro does not grab the hair for long-term usability..
  • ✅【Package Including】Replacement blood pressure cuff with a 5mm connector, user manual, 4mm connector, 6mm connector, 7mm connector, and our lifetime service..
  • ✅【Notice&Warranty】Not include a blood pressure machine. Money-back satisfaction guarantee if you have any quality concerns or other problems, pls feel free to contact us via amazon, we will solve your problem in 24 hours.
Check Stock

PROZOR 192KHz Digital to Analog Audio Converter - Upgrade Volume Adjustable Optical to RCA Converter with Optical & USB Power Cable, Digital DAC Converter SPDIF TOSLINK to Stereo L/R & 3.5mm Jack

  • 192kHz DAC converter prozor digital to analog Audio converter, converts coaxial or Toslink digital PCM Audio signals to analog L/R RCA and 3. 5mm jack Audio simultaneously (input and output cannot be reversed).
  • Supports volume adjustment headphone amplifier function.
  • Audio amplifier chip and volume adjusting switch. Allowing you to drive your headphone directly and adjust the output volume. A similar amp function provides better sound quality..
  • 192kHz 24-bit sampling rate supports sampling rate at 32kHz, 44. 1kHz, 48kHz and 96kHz and 192 kHz.
  • 24-bit SPDIF incoming bit stream on L/R channels, to eliminate noise when no signal input, and automatically mute while non-audio input signal..
  • Aluminum metal casing durable aluminum metal shell makes it heat-resisted and high quality.
  • It can easily install and operate. Powered by 5. 5mm USB power cable (power adapter is not included).
  • Don't use Other plugs, It can only use 5V 1a plug..
  • Gold-plated input & output gold Plated interface to reduce signal transmission loss. Input Audio connector: 1 x Toslink (included 1m 4. 0/OD slink cable), 1 x RCA (coaxial).
  • output audio connector: 2 x RCA/L), 1 x 3. 5mm jack..
Check Stock

Monoprice 50ft 3.5mm Stereo Plug/Plug M/M Cable – Black (100647)

  • This cable features a male 3. 5mm stereo (TRS) plug on each end with molded connector housings and strain relief boots..
  • The cable is ideal for connecting a stereo audio output such as an mp3 player or phone to a stereo audio input such as the auxiliary input on a car stereo system..
  • The 3. 5mm (1/8) stereo TRS connector is more commonly known as the Headphone Jack on portable mp3 players and mobile phones..
  • Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices..
Check Stock

Marinco Power Products CS6365N.OEM Plug Locking Master/50, 50 Amp, 125V/250V

  • A. W. G. : 22-16 0. 5-1. 5mm²/ 16-14 1. 5-2. 5mm²/ 12-10 4-6mm².
  • Comply with all relevant us European standards, install bay makes it easy. Translucent tubing allows for visual inspection of inserted wiring.
  • Used for different types of car audio and security installations, prevents the wire from shorting out by insulating the end of the wire..
  • High quality nylon crimp cap with tin-plated copper ferrule terminals connector.
  • Package AWG 22-16/16-14/12-10 each 100 pcs, total 300 pcs..
Check Stock

Giveet Digital to Analog Audio Converter, DAC Digital SPDIF Optical (Toslink) to Analog L/R RCA & 3.5mm AUX Stereo Audio Adapter with Optical Cable for TV Box DVD PS3/PS4 Xbox Amp Home Cinema

  • 192kHz DAC converter prozor digital to analog Audio converter, converts coaxial or Toslink digital PCM Audio signals to analog L/R RCA and 3. 5mm jack Audio simultaneously (input and output cannot be reversed).
  • Supports volume adjustment headphone amplifier function.
  • Audio amplifier chip and volume adjusting switch. Allowing you to drive your headphone directly and adjust the output volume. A similar amp function provides better sound quality..
  • 192kHz 24-bit sampling rate supports sampling rate at 32kHz, 44. 1kHz, 48kHz and 96kHz and 192 kHz.
  • 24-bit SPDIF incoming bit stream on L/R channels, to eliminate noise when no signal input, and automatically mute while non-audio input signal..
  • Aluminum metal casing durable aluminum metal shell makes it heat-resisted and high quality.
  • It can easily install and operate. Powered by 5. 5mm USB power cable (power adapter is not included).
  • Don't use Other plugs, It can only use 5V 1a plug..
  • Gold-plated input & output gold Plated interface to reduce signal transmission loss. Input Audio connector: 1 x Toslink (included 1m 4. 0/OD slink cable), 1 x RCA (coaxial).
  • output audio connector: 2 x RCA/L), 1 x 3. 5mm jack..
Check Stock

Pyle Video Shotgun Microphone-Professional Cam Mounted Back Electret Condenser External Mic-Compatible for DSLR Camera Camcorder Smartphone iPhone w/ 3.5mm Connector-PylePro PMKSF32

  • 3. 5mm Connector: The video camera camcorder microphone attachment is equipped w/ a standard 3. 5mm plug connector. Compatible w/ devices w/ a 3. 5mm mic jack like iPhone, Android, cameras, camcorder, audio recorder, tablet, laptop and more.
  • CRYSTAL CLEAR VOCALS: This condenser microphone for camera features a line and gradient polar pattern and is excellent in off-axis rejection to reduce unwanted noise of the surrounding. Perfect for interview, podcast, live streaming, YouTube vlog etc..
  • Stable secure shock mount: Pyle Pro shotgun microphone for camera features a heavy-duty secure and stable shock camera mount that effectively absorbs shock and minimizes unwanted vibrations and handling noise that may interference with the recording.
  • Light-weight pen-sized design: The light-weight pen-sized metal construction makes the mic ideal for just about any audio recording application. Perfect for on-the-go recording & works great for social gatherings, weddings to outdoor sporting events.
  • COMPLETE KIT: This shotgun mini mic for camera comes w/ (4) 377 button cell (sr626sw) battery w/ over 100 hours of continuous use so you won't have to worry about insufficient battery power for long time recording. Also comes w/ microphone windscreen.
Check Stock

Insignia 1/4'-to-3.5mm Mini Headphone Jack Adapter - Black

  • Perfect for replacing worn out plugs for headphones or making a cable to a desired length or replacing a broken connector..
  • Easy to handle,you really don't have to be a professional to do this. Just insert the cables in the hoops, twist and lock in place, and only then solder..
  • Suitable for the cable up to 5mm, if your cable is too thin, just use some sleeve to hold it properly to avoid the movement.
  • Package include: 4 Pack connector + Some shrinkle tubing.
Check Stock

Master Airbrush (Pack of 10) TB-003 Empty 3/4 Ounce (22cc) Glass Jar Bottles with 60° Down Angle Adaptor Lid Assembly - Fits Single-Action Siphon Feed Airbrushes, Use with Master Badger Paasche, Iwata

  • Pack of 10 Master Airbrush Model TB-003 Jar and Lid Assemblies. Empty 3/4 Ounce (22cc) Glass Jar Bottles with a 60° Down Angle Adaptor Lid Assembly. For use with siphon feed single-action airbrushes..
  • The connection angle is at the industry standard 60° down angle from vertical that most brands of siphon, suction, or bottom feed single-action airbrushes use. The adaptor connection size is also at the industry standard 1/5" (5mm) size that friction-fits into the airbrushes fluid inlet..
  • The adaptor lid assembly is compatible to fit most popular single-action siphon, suction or bottom-feed airbrush brands including Master, Iwata, Paasche, Badger, Etc....
  • Jar and Lid Assembly Specifications - Material: Glass jar bottle with plastic lid and metal adaptor connector.
  • Connector: 1/5" (5mm) size adaptor at a 60° down angle.
  • Not For Use with Dual-Action Airbrushes: Do not use these 60° down angle jar and lid assemblies with dual-action airbrushes, as the jars will tilt forward when attached, and not be parallel with the airbrush body. Dual-action airbrushes require the 30° down angle from vertical adaptor connector to fit onto the airbrushes properly..
Check Stock

Nilight - 50036R Closed End Crimp Terminal 300 pcs 22-16/16-14/12-10 Gauge Nylon Wire Connector Kit,2 Years Warranty

  • A. W. G.: 22-16 0. 5-1. 5mm²/ 16-14 1. 5-2. 5mm²/ 12-10 4-6mm².
  • Comply with all relevant us European standards, install bay makes it easy. Translucent tubing allows for visual inspection of inserting wires.
  • Used for different types of car audio and security installations, prevents the wire from shorting out by insulating the end of the wire.
  • High quality nylon crimp cap with tin-plated copper ferrule terminal connector.
  • Package AWG 22-16/16-14/12-10 each 100 PCs, total 300 PCS.
Check Stock