Top 2 Centrifugal Dryer

Centrifugal clutch Go kart clutch Predator 212 clutch 3/4" Bore 12 tooth with bolt Compatible Predator 212cc 196CC & GX160 GC160 Up to 6.5 hp Engine

  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit 212cc 196CC 2hp-7hp Engines.
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit GC160, GC190, GX120, GX140, GX160, GX200 2hp-7hp Engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit B&S Tecumseh 2-6.5 HP and with 3/4” with 3/4" Bar Shaft and 3/16" Key Way engines..
  • Centrifugal Clutch 3/4" Bore 12 tooth Compatible whit Single Wheel Belt Direct Drive Karts with Tires No Larger Than 15" Tall..
  • Go Kart Clutch kit：Clutch and bolt & hexagonal wrench.
Check Stock

QWORK Centrifugal Casting Crucible, 2 Pack Zirconia Casting Cup Machine Crucible Hooded for Dental Lab, Over 200 Times of Use

  • High quality: QWORK Casting Cup made of fused silica and high-quality zirconia..
  • High efficiency: Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high-frequency casting machine..
  • Note: It is recommended that the melting temperature is not higher than 1371 degrees Celsius or 2500 degrees Fahrenheit..
  • Widely used: Suitable for replacing the ceramic crucible of the centrifugal casting machine..
  • Package include: 2 Pack Centrifugal Casting Crucible..
Check Stock

L20-202Y 20mm Electric Motor Centrifugal Switch, Electric Clutch Controller Parts 3000RPM

  • Motor centrifugal switch: Shaft diameter 20mm, 3000RPM..
  • Advantages: Helps to start the motor safely and quickly. Easy to install and easy to use..
  • Model: The number behind the model L of the centrifugal switch is the size of the large round hole and the size of the motor shaft. For example, L20-202Y, the shaft diameter is 20mm..
  • The difference: The centrifugal switch is divided into a centrifuge and a bottom plate, and the bottom plate is mainly at a different contact position..
  • Friendly Tips: There are two levels and four levels. The two levels are 3000RPM, the numbers are 2.
  • the fourth level is 1500RPM, and the number ends with 4..
Check Stock

Desktop Electric Lab Laboratory Centrifuge Machine Lab Medical Practice w/Timer and Speed Control - Low Speed,4000 RPM, Capacity 20 ML x 6-110v by Lucky Seven

  • Time rang:0~60min or without limit. Maximum relative Centrifugal force: 1790×g. Electric current:AC110V 60 HZ. Capacity:20ml×6.
  • Maximum speed: 4000r/min.6 Tubes are provided in this lab centrifuge, the centrifugal capacity is 20ml per tube, benefitting your workflow efficiency..
  • Table-centrifugal machines are widely used in the laboratory or produce department for organisms、 medical、 chemistry etc. Our lower speed centrifugal machine with the maximum speed 4000r/min and be equipped with/without timer. It mainly be used for the appraisal radioactivity and separate cell or particle..
  • The table-centrifugal machines are widely used in the laboratory or produce department fororganisms、 medical、 chemistry etc. The lower speed centrifugal machine with the maximum speed 4000r/min and be equipped with/without timer. It mainly be used for the appraisal radioactivity and separate cell or particle..
  • Centrifugal machine is easy to use with its clear control panel for controlling the speed and time. bench-top centrifuge is equipped with speed and timer control to meet your requirement.The items are the same as the pictures.We provide carefree return, Our aim at pursuing the maximum satisfaction of our buyers!.
Check Stock

2 Dental Lab Quartz Zirconia Centrifugal Casting Crucible Hooded High Quality

  • 2 Dental Lab Quartz Zirconia Centrifugal Casting Crucible Hooded.
  • Made of fused quartz and high quality zirconia. It will last through many casting jobs.
  • Can be used more than 200 times by centrifugal casting machine, can be used about 20 times by high frenquency casting machine.
  • Bottom size: 2 3/4" (L) x 1 " (W) Height: 1 7/8".
  • Estimated Delivery Time: Between 7 to 14 days.
Check Stock

Centrifugal Clutch 3/4' Bore 12 Tooth 35 Chain for Go Kart Mini Bike Fun Kart 2-7 HP Engine Fits for Honda GX160 GX200 GX140 GX120 GC160 GC19

  • Fits for Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight Greyhound 196cc, Harbor Freight Predator 212cc, Tecumseh Briggs and Stratton Tecumseh engines and 2-6.5 HP with 3/4" shaft Tecumseh Engines.
  • Also fits any other engines with 3/4 crank shaft and 3/16" key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands.
  • Centrifugal clutch 3/4" bore 12 tooth #35 chain screw sets for go kart mini bike fun kart 2-7 HP engines 2300±300 PRM.
  • 3 /4-inch centrifugal clutch for single wheel belt direct drive karts with tires No Larger Than 15" tall.
  • Package included:1x 12 Teeth Centrifugal Clutch, 1x #35 Chain, 2 x built-in screws and 1 x Connecting Link, Easy installation, a perfect replacement part for your mini bike and go kart..
Check Stock

Youxmoto Go Kart Clutch 3/4″ Bore 12T with #35 Chain, 12 Tooth Centrifugal Clutch and Chain for Go Kart Mini bike Honda cloned Engines GC160, GC190, GX120, GX140, GX160, GX200-2-6.5hp, 3/4″ Shaft

  • 【BROAD COMPATIBILITY】: This 3/4 clutch 35 chain Perfect for Go Kart, Mini bike, Fun Kart, and any other engines with 3/4 crank shaft and 3/16” key way, most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands..
  • 【FITMENT】: Fits for 2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Briggs & Stratton 2 – 6.5 HP with 3/4″ Shaft 212 212cc Predator Engine Clutch, and Common clutch for 3.5-7hp engines using #35 Chain..
  • 【WORK WITH】: 3/4″ Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain for 2-7 HP Engines, Engagement Speed 2300±300 RPM..
  • 【PACKAGE INCLUDED】: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link..
  • 【LIFETIME WARRANTY】: Go Cart centrifugal clutch and chain from Youxmoto comes complete with a lifetime warranty. If you are not satisfied with our products, 100% refund or resend..
Check Stock

13 FISHING - Inception Sport Z - Baitcast Reels

  • 6-WAY CENTRIFUGAL BRAKING SYSTEM - The casting reel is equipped with 6-way centrifugal braking system and Beetle Wing rapid access side plates that....
  • JAPANESE HAMAI CUT GEARING - Japanese Hamai Cut Gearing offers a smooth transition of power from the handle and the advanced drag system with....
  • ARROWHEAD LINE GUIDE - The Arrowhead line guide works to increase the fluidity of line release, while a micro click cast control gives anglers the....
  • OCEAN ARMOR 2 SALTWATER PROTECTION PROCESS - The Inception SZ features Ocean Armor 2 Saltwater Protection for increased corrosion resistance in....
  • PREMIUM COMPONENTS - This low-profile casting reel incorporates CZB Spool Bearing Technology, Instant Stop Anti-Reverse, High Spin Spool Shaft, EVA....
Check Stock

Juicer Machine, 500W Centrifugal Juicer Extractor with Wide Mouth 3” Feed Chute for Fruit Vegetable, Easy to Clean, Stainless Steel, BPA-free (Green)

  • Upgraded 500W Motor - Centrifugal juicer machine with upgraded 500W high speed motor, more efficient and powerful, last much longer than other competitor. 3” wide mouth will save your time on cut everything into small sticks..
  • Dual Speed Juicer Machine - Juicer Machine with 2 speed control(12000-18000 RPM), "1" low speed for soft fruits and veg, such as watermelon, orange, strawberry etc. “2” high speed for some hard fruits and veg, such as carrot, apple, pear etc..
  • Centrifugal Juicer with Wide Mouth - Centrifugal juicers have a wide mouth to feed your fruits and veggies into, Save your time on chopping and cutting the fruits and vegetables before juicing..
  • Safety Design and Easy to Clean - Juicer Extractor with locking system arm, it will not work without cover locked into place. Overload protection system will switch off machine once overheating occurs. Detachable parts makes it easy to clean!.
  • To remove filter basket, please grasp the edge of the filter basket and pull up. Notice: Avoid trying to juice things with a low water content..
Check Stock

Mueller Austria Ultra Juicer Machine Extractor with Slow Cold Press Masticating Squeezer Mechanism Technology, 3 inch Chute accepts Whole Fruits and Vegetables, Easy Clean Large Nickel

  • ???? LARGE FEED CHUTE – 3 inch feed chute easily accepts large pieces of fruits and vegetables greatly reducing prep times and also has a smaller feed chute incorporated to make juicing smaller fruits & veggies much easier..
  • ???? GREATER JUICE YIELD WITH DRYER PULP – The patented mechanism spins at 60 rpm extracting up to 60% more juice and 50% more vitamins and minerals than centrifugal juicers. Drier pulp equals less foaming, no clogging and easier quicker clean-ups..
  • ???? ANTI-DRIP DESIGN AND EAST FAST CLEAN-UPS – The pre-clean function allows for no cumbersome clean-ups..
  • ???? SAFER OPERATION & BPA FREE – The safety sensor button assures that if all the parts are not correctly installed and attached, the juicer will not operate. This greatly reduces any possibilities of accidents..
  • ???? QUALITY ABOVE ALL ELSE – Engineered in Germany and built with quality in mind, the Mueller Ultra Juicer was designed and tested through three professional grade inspections to last longer than many others on the market. With an industry leading 2 Year no hassle Warranty + 2 additional Years if you register your product with the manufacturer..
Check Stock

Go Kart/Mini Bike Clutch Centrifugal Clutch Engine Clutch 5/8 Inch Bore #35 Chain 12 Tooth 12T Chain 6.5HP

  • Fit 2 - 6.5 HP Small Engines Parts Honda GC160, GC190, GX120, GX140, GX160, GX200.
  • Go Kart Minibike Belt Direct Drive Fun Kart Centrifugal Clutch 3 4 Bore 12 Tooth #35 Chain.
  • Fit Briggs & Stratton 2 - 6.5 HP with 3/4" Shaft 212 212cc Predator Engine Clutch.
  • Fit Centrifical Tecumseh Engines 2 - 6.5 HP with 3/4" Shaft and Any Other Go Cart Motor Auto Engines with 3/4 Crank Shaft and 3/16" Key Way.
  • 3 4 inch Bar Centrifugal Clutch Performance Parts.
Check Stock

AcPulse Go Kart Clutch Centrifugal Clutch 3/4 in. Bore 10T 10 Tooth for #40 41 420 Chain Up to 6.5 HP 200CC Fit GO Kart Minibike Lawnmower Replace Part

  • Go kart clutch: Centrifugal Clutch 3/4" bore, 10 Tooth for 40,41,420 chain, Up to 6.5HP engines. Common clutch for 3.5-6.5 HP engines, mounts onto crankshaft using bolt and washer on the end of the crankshaft..
  • High Quality centrifugal clutch: 100% Brand New, TS16949 Certified Quality System. Super Grade High Impact/Wear Resistant Steel, 50% Longer Lifetime. Set screws and chain NOT included..
  • Perfect for: Go Kart Minibike Baja Mini Bike MB165 and MB200, including Baja Heat, Mini Baja and the Baja Warrior, 6.5 HP Engines (For Motors No More Than 200 cc Only)..
  • Centrifugal Clutch: Compatible with 2-6.5hp Honda and Honda Cloned Engines GC160, GC190, GX120, GX140, GX160, GX200 Briggs and Stratton and 2-6.5 HP with 3/4” Shaft Tecumseh Engines..
  • Client Support: Please e-mail or call us to refund or replace the product if there is any problem, all we want is to make you satisfied with our products and services..
Check Stock