Top 2 Flutes Bits

Jerax tools 3/16 to 7/8 Inch Step Drill Bit M2 HSS Spiral Grooved Step Bit for Stainless Steel Metal Wood Plastic

  • [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle..
  • [Easy & Fast]: With our high-accuracy CNC processing and optimized spiral design over the years, our spiral flutes design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Compared to the Straight flutes, the Spiral flutes guide the debris out faster by its nature, making the drilling smoother and creating fewer burrs for the holes. Once you've tried our spiral design, there's no way back to the straight design..
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel..
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 12 sizes so you can drill 12 different hole sizes, saving you time and effort to change bits. Marked sizes include: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

Topline USA M42 Cobalt #44 Drill Bits 6-Pk

  • Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark).
  • Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes.
  • Precision ground, bright finish with polished flutes that increase chip ejection.
  • 135-degree split point for fast penetration and accurate starting with no center punch.
  • Wire Gauge Diameter: No. 44, Decimal Inches Equivalent: 0.0860, Tap Size: 4-36 NS, Overall Length: 2-1/8-inch.
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

HQMaster CNC Router Bit 1/8” Shank Ball Nose End Mill Titanium Coated Spiral Milling Cutter Cutting Diameter 1/1.5/2/2.5/3.175mm Engraving Carving Tool Set Tungsten Steel for MDF Acrylic Wood PVC 10Pcs

  • PACKAGE CONTENTS: 10pcs Titanium coating ball nose upcut bits assorted in storage case. Number of Flutes: 2. Material: Solid Carbide..
  • DIMENSIONS: Shank diameter: 1/8 (3.175mm).
  • cutting edge diameter: 1mm/1.5mm/2mm/2.5mm/3.175mm, cutting edge length (CEL)/flute length: 4mm/6mm/8mm/12mm, overall length: 37-38mm.
  • RANGE OF PROCESSING: for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc..
  • HIGH EFFICIENCY: these bits own sharp edge which is able for fast engraving that makes high efficiency.
  • durable, high precision and not easy to break.
  • it is smokeless and burr-free while processing.
  • PERFECT CUTTING: the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Check Stock

HIDOTOL Hex Shank Drill Bit Set 13 PCS - Fully Ground High Speed Steel Titanium Impact Hex Drill bits for Metal, Wood, Plastic, Aluminum Alloy, Quick Change, 1/16'-1/4'

  • Quick Change - 1/4 inch hex shank fits into all power tools, more easily and securely without slip and shedding..
  • HSS Titanium Coating - Classic High Speed Steel with titanium coating increases abrasion resistance and durability. Precision fully ground, the cutting edge is hardened and honed for sharpness..
  • Flutes Form & 135° Split Point - 2 flutes form helps clear particles quickly, decreasing friction and heat for a faster and cooler drilling performance. 135° split point reduce feed pressure for easier penetration, improve cutting speed, prevent walking and makes drilling precise..
  • Application - Widely used in aluminium alloy, wood, plastic, sheet metal (within 5mm thickness), etc. Ideal for DIY, home and general building/engineering using..
  • Specifications - Set of 13pcs titanium twist drill bits includes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4". A drill bits holder with size index is included in the set for easy storage and organizing..
Check Stock

Wood Owl 1' Diameter x 7 1/2' Long Ultra Smooth Tri Cut Auger Hand Brace Boring Bit PTEE coated 09713

  • 4 pc set of large bits contains 1-1/8", 1-1/4", 1-3/8" and 1-1/2”diameter by 7-1/2” long Wood Owl Tri Cut Ultra Smooth Auger bits.
  • The patented Tri-Cut Ultra Smooth design has three precision ground cutting edges and three flutes engineered to optimize performance.
  • Tri-Cut design has three cutting spurs that score the outside of the cut producing extremely smooth holes.
  • The precision cut lead screw pulls the bit straight and true through material.
  • PTEE coating minimizes friction and allows quick and easy cutting and chip ejection.
Check Stock

IVY Classic 01543 No. 43 Wire Gauge Drill Bit, M2 High-Speed Steel, 135-Degree Split Point, 1/Card

  • Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark).
  • Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes.
  • Precision ground, bright finish with polished flutes that increase chip ejection.
  • 135-degree split point for fast penetration and accurate starting with no center punch.
  • Wire Gauge Diameter: No. 43, Decimal Inches Equivalent: 0.0890, Tap Size: 4-40 NC, Overall Length: 2-1/4-inch.
Check Stock

DEWALT Drill Bit Set Brad Point 6-Piece DW1720 Black

  • Precise cutting edges of the drill bits for wood or metal are designed to reduce splintering.
  • Brad point tip of drill bits reduces walking.
  • DEWALT drill bit set is engineered flutes for clean effective chip removal.
Check Stock

uxcell Spiral Point Plug Threading Tap M6 x 0.75 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End, 2pcs

  • PACKAGE INCLUDES: There are total 12pcs of taps in 2 different standards( Metric, Inch) that you can use for tapping various threads..
  • DRILLING & TAPPING: This hex shank drill bits can drill and tap at the same time, saving your time and effort..
  • HEX SHANK: This is a set of 12 pieces hex shank drill bits. Drill taps are designed with spiral flutes, which have better the chip clearing process..
  • MARKED CLEARLY: Their specifications are marked clearly on the surface from M3 to M10, so you can find the right drill tap bit you need quickly..
  • HIGH HARDNESS: The hex shank drill bits are made of high speed steel with titanium coated, the drill bits have high hardness, rustproof, solid and durable..
Check Stock

AresMro Hex Shank Drill Bit Set (13Pcs Set+3 Pcs Free), Premium 4341 HSS Titanium Impact Hex Drill Bits for Wood, Steel, Metal, Plastic, Quick Change Design (1/16”-1/4”)

  • 【Combo Set of 16 Pcs】Total 16 Pcs hex shank twist drill bit set including sizes:13 most commonly-used sizes (1/16",5/64",3/32",7/64",1/8",9/64",5/32",11/64",3/16",13/64",7/32",15/64",1/4") to satisfy all needs, additional piece of 1/16", 5/64" and 3/32" for easy replacement..
  • 【Premium HSS Titanium Coating】Industry grade 4341 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. Titanium coating increases wear-resistance and durability..
  • 【Flutes Form & 135°Split Point】2 flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process. 135° Split Point with straight shank prevents walking and makes drilling precise. No center punch is needed..
  • 【Quick Change】1/4 inch(6.4mm) hex shank fits into all power tools more easily and securely, specially for locking into quick change chuck..
  • 【Meet Your Demands】Small Drill bits for soft metal, wood, plastic, steel within 5mm thickness, aluminum alloy and other soft metals. Ideal for DIY projects, household maintenance and repair.×NOT for glass, ceramic or concrete drilling..
Check Stock