Top 2 Flutes End Mills - BuyWiseBest.com

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Corner rounding end mills are designed to take the edge off sharp corners.
Four flutes produce a better finish than fewer flutes.
High-speed steel is compatible with a variety of materials.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Non-center-cutting design supports peripheral milling and finishing.

Corner rounding end mills are designed to take the edge off sharp corners.
Four flutes produce a better finish than fewer flutes.
High-speed steel is compatible with a variety of materials.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Non-center-cutting design supports peripheral milling and finishing.

[ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
[ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
[ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
[ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
[ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..

Corner rounding end mills are designed to take the edge off sharp corners.
Four flutes produce a better finish than fewer flutes.
Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Non-center-cutting design supports peripheral milling and finishing.

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Dimensions ---- Shank diameter: 1/4inch / 6.35mm.
Strong and Durable ---- Milling cutter is made of HHS-AL material, it is high-wearable and has a long life.
Smooth cutting and fast chip-removal, gives outstanding cutting performance and wear resistance..
Sharp Edge ---- The design of 4 flutes, sharp edge, and superior wear resistance at high cutting speeds.
Durable, high precision and not easy to break.
easy installation and improved work efficiency..
Application ---- 1/4 inch end mill bits are suitable for side milling, end milling, finish machining, etc. For carving, cutting, engraving, milling in materials like die steel, carbon steel, alloy steel, cast iron, tool steel, titanium, aluminum, rosewood, density board, wood, acrylic, PVC, MDF etc..
Package Contents ---- 8pcs 1/4” end mills, each is individually packed in a plastic storage box..

5 PC SET 3/16, 3/8, 1/2, 5/8, 3/4" DRAWBAR END THREAD: 7/16" -20.
Hardened and ground For Bridgeport type milling machines.
Hardened and ground. For double and single end mills (single end mils only for sizes over 5/8").
5 PC SET For Bridgeport type milling machines. DRAWBAR END THREAD: 7/16" -20.
For double and single end mills (single end mils only for sizes over 5/8").

Contains Kodiak Cutting Tools brand premium quality USA made ball nose solid carbide end mills.
4 flute ball nose end mills are center cutting and made from premium sub-micrograin carbide.
Stub length end mills for extra rigidity.
Fitted wood block stand included and each size comes in a marked plastic tube.
Contains 1pc of each diameter: 1/8, 3/16, 1/4, 5/16, 3/8 and 1/2.

Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
Shell mills can easily be held with Straight Shank arbors.
Clearance & relief angels are built into the base.