Top 2 Pole Power Connector

ABN Car Flag Pole Stand – RV Flag Pole Kit, Truck Flag Mount – Flag Pole Tire Stand, Flag Pole Holder, Flag Pole Base

  • ...al flag, team flag, or any other unique flags at any time.
  • Keep in your motorhome, RV, camper, or vehicle for easy storage and quick setup.
  • EASY TO USE: Place this tailgating flag pole mount under your car tire to support your existing flag pole with the weight of your vehicle or underneath front trailer jack.
  • Lock connector pole into base, place assembly on the ground directly in front of your car tire, drive car forward until tire is directly on top of base plate, slide your flagpole into connector pole and tighten with included set screw.
  • Snap release pin on base allows for quick set up and take down.
  • FITS YOUR FLAGPOLE: RV flagpole tire mount base plate is 15.75 inches x 6.3 inches with 0.1-inch thickness (40cm x 16cm x 2mm).
  • Base ring (connects to included connecting pole) is 4 inches (10.2cm) tall with 2.48-inch (6.3cm) outside diameter (OD) and 2.32-inch (5.9cm) inside diameter (ID).
  • Connecting pole is 15.75 inches (40cm) tall with 2.24-inch (5.7cm) OD and 2.2-inch (5.6cm) ID.
  • Fits most standard 20 to 25 foot flag poles.
  • Ensure your flagpole outer diameter meets these size requirements.
  • BUILT TO LAST: Constructed from solid steel with a black powder coat finish for maximum strength and longevity that resists rust and corrosion.
Check Stock

TISINO 3.5mm to Dual XLR Stereo Cable 1/8 inch Mini Jack to 2 XLR Male Y Splitter Adapter Cord- 3.3 FT

  • These 3.5mm to XLR Cables are Designed to Split a 3.5mm Aux Balanced / Stereo output Signal into two Unbalanced / Mono XLR input Signals (Left and Right Channels), They are ideal for connecting your Smartphone/ PC / Laptop to a Mixer/Speakers or similar device..
  • The XLR connectors are color-coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 19.6 inches(50 cm). The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on a Smartphone that has a 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipment is "OFF" when changing connections..
  • XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity.
  • Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss..
  • Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response..
Check Stock

TISINO 3.5mm to Dual XLR Stereo Cable 1/8 inch Mini Jack to 2 XLR Male Y Splitter Adapter Cord- 10 FT

  • These cables are designed to split a 3.5mm (1/8" aux) balanced / stereo signal into two unbalanced / mono XLR signals (left and right channels). They are ideal for connecting your iPod / iPad / iPhone / PC / Laptop to a Mixer/Speakers or similar device..
  • The XLR connectors are color coded Black(Left Channel) and Red(Right Channel), It splits closer to the XLR ends, the distance to the split point is about 7.5 inches. The 3.5mm plug is a standard 3 pole (2 rings and a tip) connector, This won't work on an iPhone or Android phone which has 4 Pole TRRS port. You may need a TRS to TRRS adapter. Please make sure the power for all your equipmant is "OFF" when changing connections..
  • XLR Connector with internal strain relief for rugged reliability, 20 AWG 4N Oxygen-Free Copper (OFC) conductor for enhanced signal clarity.
  • Heavy Duty Gold-plated connectors resist corrosion, provide durability and improve the signal transmission, ensures minimal signal loss..
  • Heavy Duty Flexible Rubber Jacket, Top quality and made by environment-friendly material, Polyethylene insulation improves high frequency response.DescriptionTISINO 10 FT Gold Plated 1/8" TRS Stereo to Dual XLR male Y-Splitter Cable.
  • This cable is designed to connect an audio device with a mini stereo phone o....
Check Stock

Pair Rockville RPG12 12\ 1600w Powered PA/DJ Speakers + 2 Stands + 2 Cables+Bag

  • ...ered PA speaker for meeting rooms, courtyards, churches, restaurants, stages and any other small to medium venues.
  • FLEXIBLE CONNECTING OPTIONS – An integrated 3-channel mixer has 2-Band (LF/HF) EQ for each channel. Two 1/4” line inputs, two 1/4” mic & XLR combo inputs, one 1/8” AUX input, one XLR loop output connector and Bluetooth connectivity accommodate almost any audio source of your choice. The onboard two-band EQ per input channel helps tune the sound to your preference.
  • EASY MOUNTING - Standard pole mount on the bottom allows you to put this PA speaker on top of a subwoofer with a sub mounting pole (STSD-20B/STSD-M20W sub pole available separately).
  • STURDY CONSTRUCTION W/ PORTABILITY – The white speaker is more than beautiful. The rugged and lightweight plywood enclosure with perforated grille holds up to touring applications. It’s easy to transport with one recessed handle on the back.
Check Stock

Fancasee 2 Pack 6 ft Replacement 3.5mm Male Plug to Bare Wire Open End TS 2 Pole Mono 1/8\ 3.5mm Plug Jack Connector Audio Cable Repair

  • Perfect replacement 3.5mm male plug connector cable apply for most speaker, PA horns, CB, amateur radios, scanners, voltage trigger applications like morse key, cooling fans, power amp & other devices..
  • 3.5mm mono 2 pole male plug to bare wire replacement audio cable..
  • Wiring diagram: PIN 1 - red wire is mono audio.
  • Easy to handle, you really don't have to be a professional to do this. Connect the corresponding bare wires together, wrap and seal the bare wire with insulating tapes..
  • Package contents: 2-Pack 6 ft length, 3.5mm mono TS male plug connector to bare wire replacement audio cable..
Check Stock

Monoprice Unity 200-Watt Bridgeable Power Amp Black

  • Class-d amplifier providing 50 watts/channel (RMS) into 8ohm loads or 65 watts/channel into 4ohm loads. Bridgeable output provides 120 watts into a....
  • 4 pole detachable speaker screw connector (Phoenix connector) with support for up to 12AWG speaker wire. 12-volt trigger input for power-on/off.....
  • Buffered loop output of original signal for connecting additional amplifiers.
  • Rear panel volume gain adjustment. Built-in thermal and short circuit protection circuits.
  • Includes rack-mount ears for mounting a single amp or two amps side-by-side.
Check Stock

Conntek 15306 UL Listed, (30 Feet), 30 - Feet , Black

  • Compatible with RV and Electric Vehicle Use. 3 pole 4 wire grounding.
  • Plug and Connector (Male & Female): NEMA 14-50.
Check Stock

Nema L5-30R 30 Amp 125 Volt Connector L5-30 Locking Power Cord Connector 2P 3W Locking Plug Industrial Grade DIY Twist-Lock Cord Connector

  • UL Certified USA Canada 3Pole Female AC DIY (Rewiarable) receptacle, [Nema L5-30R] 30Amp 125V Female.
  • Solid Nylon housing+ Copper brass blade. Very low resistance and low heat while overloaded. Solid Strain relief apply for cable from AWG#14 up to....
  • 2-Pole, 3-Wire Grounding, NEMA L5-30R Vertical Flame degree 94V-0, Nylon material, the 3 terminals are brass.
  • Twist-Lock Cord Connector Screw lock type design, Solid quality easy for operation and convenient for home DIY.
  • 30A 125V, AC 60HZ It works with SJT STW 18/16/14 and even AWG 10 power cord..
Check Stock

ALOXXI InstaBoost PLATIUM Color Depositing Conditioner Mask – Instant Temporary Hair Color Dye - Hair Color Masque for Deep Conditioning Strictly Platinum 6.8 Fl Oz

  • Custom-Designed:10AWG Wire Special Made For Goal zero Yeti And Jackery solar generator,Portable power generator,Suaoki,Renogy 400WH,EnerPlex Solar....
  • UL/TÜV/CSA/CQC Compatible With MC4 connectors 10AWG Wire 15.7" :Solar Panel Cable Kits Compatible with MC4 And Anderson adapter support 45A Peak....
  • ATTENTION PLEASE:FEMALE Of connector compatible with MC4 is POSITIVE, Please RECONFIRM the Positive and Negative pole of Your solar panel or solar....
  • Multi-Functions:Plug N Play for Portable Power Station Solar Generators But also working for your home Solar PV,Also Perfectly connect to our Solar....
  • Connect Our 8mm adapter works with anderson connector to have big current output works with MC4 connector To 8mm ASIN:B07DK9N2S8.
Check Stock

CURT 55513 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Select Toyota Tacoma, T100, Hilux , Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Honda Civic sedan, Honda Fit, Honda Accord without LED taillights, Mazda 3, Mazda CX 5 and Mitsubishi Galant sedan, 2.4L, single exhaust.
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

Screw Terminal Block Kit 5mm Pitch 2, 3, 4 Pole (40 pcs) by QSU

  • 5 mm pitch/pin spacing to match standard breadboard spacing.
  • Connector can accept wire sizes from 22 to 14 AWG.
  • 5pcs - 4 pole screw terminal block connectors.
  • Interlocking grooves allow you to build a connecter of any length.
Check Stock

YOUQUKEJI 2430 7200KV 4P Sensorless Brushless Motor with 25A Brushless ESC Electric Speed Controller for 1/18 1/16 RC Car Truck

  • 2430 Motor material: 4-pole 12-slot high-torque, 3.5mm gold-plated connector 2.0mm shaft, CNC machined blanks, 6061-T6 aluminum heat sink, secondary oxidation treatment, high-end and exquisite appearance.
  • 25A ESC parameters: motor plug: 3.5mm female bullet connector.
  • Features: High-purity copper windings can maximize efficiency, high-speed ABEC5 oversized bearings. Precisely balanced rotors and smoothness can achieve the best reliability and maximum RPM. Removable/replaceable rotor.
  • Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heatprotection / Throttle signal loss protection / Motor blocked protection/.
  • Widely compatible: universally applicable to 1/18 1/16 brushless cars-multi-installation system for M2.5 screws..
Check Stock