Top 2 Table 8 Spindle

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

Grizzly Industrial G0779-23-3/8 Heavy-Duty Floor Model Gearhead Drill Press

  • 360 degree table positioning around column.
Check Stock

WEN 4214T 12 in Variable Speed Drill Press & DPA2412T 24 in x 12 in Drill Press Table with an Adjustable Fence and Stop Block

  • Features a 5-amp induction motor, a 12-inch swing, and a 3-1/8-inch spindle travel.
  • Adjust the mechanical variable speed anywhere from 580 to 3200 RPM.
  • Digital speed readout displays current RPM of the machine for maximum precision.
  • Includes a Class IIIA 2.5mW laser, overhead light, adjustable depth stop, table roller extension, beveling 9-1/2 by 9-1/2-inch work table, 5/8-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth).
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

WEN 4214T 5-Amp 12-Inch Variable Speed Cast Iron Benchtop Drill Press with Laser and Work Light

  • Features a 5-amp induction motor, a 12-inch swing, and a 3-1/8-inch spindle travel.
  • Adjust the mechanical variable speed anywhere from 580 to 3200 RPM.
  • Digital speed readout displays current RPM of the machine for maximum precision.
  • Includes a Class IIIA 2.5mW laser, overhead light, adjustable depth stop, table roller extension, beveling 9-1/2 by 9-1/2-inch work table, 5/8-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Measures in at 16.8 by 13.5 by 36.6 inches in size with a weight of 85 pounds.
Check Stock

WEN 4212T 5-Amp 10-Inch Variable Speed Benchtop Drill Press with Laser & DPA2513 24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block

  • Product 1: Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel.
  • Product 1: Adjust the mechanical variable speed anywhere from 530 to 3100 RPM.
  • Product 1: Digital speed readout displays current RPM of the machine for maximum precision.
  • Product 1: Includes a laser, adjustable depth stop, beveling 8 by 7.5-inch work table, 1/2-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Product 2: Expand your drill press workspace.
  • compatible with the entire WEN Drill Press series.
  • Product 2: Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches.
  • Product 2: Unique design provides clearance for the drill press’ table height adjustment crank.
  • Product 2: Adjustable fence and stop block paired with the onboard rulers allow for precise and uniform drilling.
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Grizzly Industrial G0645-1/2 HP Benchtop Mortising Machine

  • 5-amp motor with 1/2-inch chuck provides up to 1725 rotations per minute.
  • 4-1/4 inch spindle travel creates mortises up to 3 inches in depth.
  • Features a spacious 13-1/2 by 6 inch table and a 10 by 8 inch cast iron base.
  • Onboard tool and chisel storage maximizes organization while keeping bits accessible.
  • Includes three chisel bits (1/4, 3/8, and 1/2 inch), a protective chip guard, a chuck extension adapter, 3/4-inch chisel bushing, an adjustable handle, spring-tensioned fence, depth stop, and a two-year warranty.
Check Stock

JET JDP-15F 15-Inch Floor Drill Press 3/4 HP 1Ph 115V 716250

  • 12-1/2" X 17" PRECISION-GROUND CAST IRON TABLE: Features twin T-slot grooves, and four table slots..
  • ONE-HANDED BELT TENSIONING: Allows for rapid speed changes..
  • DRILLING ACCURACY: X-shaped XACTA Laser ensures perfection every time..
  • INCREASED VISIBILITY: LED work light increases visibility for intricate applications..
Check Stock

WEN 4214 12-Inch Variable Speed Drill Press,Orange & DPA2412T 24 in. x 12 in. Drill Press Table with an Adjustable Fence and Stop Block

  • Product 1: Infinitely variable speed ranges from 580-3200 RPMS. Mechanical variable speed delivers equal torque throughout the range. LED read out displays speed..
  • Product 1: Spindle Travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. Front to the back of the motor is 22 inches.
  • Product 1: Quill diameter of 2.17 inches. Durable 2/3hp induction motor develops ample torque and power. Motor: 120 V, 60 Hz. Laser Module: Class III.
  • Product 1: 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right. Width with the handles: 14-1/2".
  • Product 2: Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth).
  • Product 2: Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches.
  • Product 2: Fits any drill press table between 5 and 16 inches in width.
  • Product 2: Designed to fit the entire WEN Drill Press Series.
Check Stock

WEN Bench Mortiser, 5-Amp Cast Iron with Chisel Bit Set (43013)

  • 5-amp motor with 1/2-inch chuck provides up to 1725 rotations per minute.
  • 4-1/4-inch spindle travel creates mortises up to 3 inches in depth.
  • Features a spacious 13-1/2 by 6-inch table and a 10 by 8-inch cast iron base.
  • Onboard tool and chisel storage maximizes organization while keeping bits accessible.
  • Includes three chisel bits (1/4, 3/8, and 1/2 inch), a chuck extension adapter, 3/4-inch chisel bushing, an adjustable handle, spring-loaded cast iron fence, depth stop, and a two-year warranty.
Check Stock

Grizzly Industrial G1026-3 HP Shaper

  • 2 spindle speeds: 7,000 and 10,000 R.P.M..
  • 3 H.P., single phase, 220V motor with reversing switch.
  • 3 interchangeable spindles: 1/2", 3/4" and 1".
  • Table with standard wing attached measures 30-1/2" x 28-1/4".
Check Stock