Top 2 layer Pcb

PAUTIX COB LED Strip Lights 20ft/6.1m 6000K Daylight White,504 LEDs/m 6000LM Super Bright DC24V CRI90+ Flexible LED Tape for Cabinet Home DIY Lighting Projects(Power Supply Not Included)

  • .... 180 degrees beam angle design for 50% wider lighting,multiple chips on board for uniform illumination,NO MORE worries about dark spot!(Power interface specification: 5.5mm 2.1mm).
  • 【Safe for Daily Use】Compared to regular LED strip lights,the light is soft and uniform,which is safer to your eyes.With real double-layer PCB board,the PAUTIX COB LED Strip Light has better heat dissipation than others,it's safe for children and pets to touch.
  • 【Widely Use & Durable】COB LED light strip with high color rendering index(90+), rich colors and strong reduction applicable to high-end business clubs, jewelry, cabinet lighting,it also provides super bright light for your dressup mirror /make-up table /closet /bookshelf /wine shelf /TV backlight.High-quality materials and real double-layer PCB board make this COB led strip light durable,the service life is more than 50,000 hours.
  • 【Easy to Install & DIY】With authentic stronger 3M adhesive,PAUTIX COB LED strip lights can be reliably installed,idea for kitchen, cabinet, bedroom, stair, mirror, corridor, DIY backlight, table lamp, toy light, and other places that need decoration.
Check Stock

MSI MPG B650I Edge WiFi Gaming Motherboard (AMD AM5, Mini-ITX, DDR5, PCIe 4.0, M.2, SATA 6Gb/s, USB 3.2 Gen 2, HDMI, Wi-Fi 6E, AMD Ryzen 7000 Series Desktop Processors)

  • Supports AMD Ryzen 7000 Series Desktop Processors.
  • Supports DDR5 Memory, up to 6600+(OC) MHz.
  • Enhanced Power Design: Direct 8+2+1 VRM power, Core Boost, Memory Boost.
  • Premium Thermal Solution: Extended Heatsink, MOSFET thermal pads rated for 7W/mK, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience.
  • High Quality PCB: 10-layer PCB made by 2oz thickened copper and server grade level material.
Check Stock

CIY GK68 Dual Mode Wireless Hotswap Keyboard Kit, DIY 65% Keyboard, Bluetooth 5.0/2.4G Wireless, Replaceable MX Switch 5Pin/3Pin, ABS Shell,Metal Positioning Plate, Sound Insulation Mat(Black Hyaline)

  • Freely match keycap switches: CIY65% wireless keyboard kit, switch hot-swappable shaft base, you can match any switch and keycap at will, DIY your favorite keyboard!.
  • Two wireless modes: Using the classic dry battery life plan, Bluetooth 5.0 and 2.4G wireless technology, two AAA batteries can last up to two months, while supporting smart sleep power saving mode..
  • Switch hotswap: Switch hot-swappable shaft seat, unique design patent, combined with double-layer thick PCB panel, bring longer mating cycle life..
  • Full configuration: ABS one-piece shell, strong hardness, metal positioning plate, sandwich sound-proof silicone, bottom silencing cotton, thick double-layer PCB panel, all are the top configuration, it is the best choice for your keyboard DIY!.
  • Note: When installing the switch, please check that the pins of the switch are not bent. When installing, you need to insert the hot-swap shaft seat vertically. Please refer to the video of switch installation requirements..
Check Stock

CYETUS Espresso Machine for Home Barista CYK7602, Milk Steam Frother Wand, for Espresso, Cappuccino and Latte, Black

  • 【PCB Temp System】 PCB electronic control to ensure the temperatures of water and steam more accurately, thermo block heating and pre-brew system, which will immerse coffee grounds in water to moisten before extraction..
  • 【15 Bar High Pressure Extraction】15-Bar pump delivers the right amount of pressure for maximum flavor extraction and produces a beautiful layer of crema for your espresso..
  • 【Built in Steam Wand】With steam wand, high pressure frothing function will give you more options to enjoy cappuccino, latte or machiato with creamy and rich foam at any time at home. Detachable frothing nozzle is easy to be cleaned..
  • 【2-in-1 filter holder & Double Drip Tray】2-in-1 filter holder automatically delivers 1 or 2 shots, always the exact amount of espresso you desire. The Double drip tray is easy to remove to fit taller cups, such as latte glasses, and also quite friendly for you to clean..
  • 【Our Service】Extra accessories include: 2x coffee glasses, 1x tamper, 1x tamper mat, 1x milk frothing pitcher, 1x apron, 1x cleaning cloth. We offer a one-year warranty and we promise excellent after-sales service. If you have any questions about our product or are dissatisfied with our product, please contact us..
Check Stock

MKS Gen L V2.1 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard

  • Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable..
  • Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS..
  • TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently..
  • Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
Check Stock

MSI MPG Z690 Edge WiFi Gaming Motherboard (ATX, 12th Gen Intel Core, LGA 1700 Socket, DDR5, PCIe 5, 2.5G LAN, M.2 Slots, Wi-Fi 6E)

  • Supports 12th Gen Intel Core Pentium Celeron processors for LGA 1700 socket.
  • Premium Thermal Solution: Aluminum cover with heatsink, heat-pipe, MOSFET thermal pads rated for 7W/mk, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience.
  • MYSTIC LIGHT: 16.8 million colors / fancy lighting effects controlled in one click. MYSTIC LIGHT SYNC supports RGB and RAINBOW(ARGB) LED strips and Ambient devices.
  • High Quality PCB: 6-layer PCB made by 2oz thickened copper and server grade level material.
Check Stock

MKS Gen L V2.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard 1PCS

  • ❤️ Integrate 2560 and Ramps1.4 one PCB,easier wiring and more stable.
  • ❤️Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
  • ❤️ Support a variety of stepper drivers:4988,8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS.
  • ❤️TFT24/28/32/35 & Available to connect external large stepp drivers Accept 24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently.
  • ❤️Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.
Check Stock

Helping Hands Soldering, Toolour Magnetic Helping Hand for Soldering, 4 PCB Circuit Board Holder and Flexible Helping Arms, Third Hand Tool with Heavy Duty Base for Electronic Repair Hobby Craft

  • ...action to the steel base. We included two 9.8″ arms, two 5.9″ arms helping hand arms, completely free your hands up and work easier than ever before. The 360° rotating alligator clip allows you to be more flexible in welding work..
  • Magnetic PCB Holder Pillars: 4 small pillars can hold a PCB board by their multi-layer or tips through the location hole component point. Full metal body is anti-rust and corrosion-resistant, powder-coated promises a longer usage. To make sure the PCB you worked on can be positioning steadily, the pillars’ tips are better to hold boards by 4 location holes..
  • Stainless Steel Base: 9″ x 5. 9″ heavy duty base with industrial-grade weighted construction, never tip over, powder-coated iron base. 4 pcs rubber feet prevent the stable soldering station from sliding around on your workbench, even protect the work surface against scratches and scuffs. NOTE: Due to different manufacturers’ production batches, the iron plate may also be updated at any time(eg with holes or engraved LOGO). Under normal circumstances, it will not affect your normal use..
  • Widely Used & Service: Helping hands soldering for any electronic, welding, crafting, painting, figurine and hobby work, or any precision project that requires extreme accurac....
Check Stock

Gikfun Electronic Hourglass led DIY Kits Welding Practice Board Blue Ray EK1886

  • This is a beautiful electronic hourglass that is fun to build and nice to look at when finished, it is not only a PCB board for practicing welding....
  • Comes with English user manual and online PDF file, which will guide you how to finish step by step, perfect for school basic electronics experiment....
  • The suite adopts double layer PCB, and the circuit consists of 30 pieces white LED blue ray..
  • Under the control of MCU program, it displays analog hourglass image..
Check Stock

MSI PRO Z790-A WiFi ProSeries Motherboard (Supports 12th/13th Gen Intel Processors, LGA 1700, DDR5, PCIe 5.0, M.2, 2.5Gbps LAN, USB 3.2 Gen2, Wi-Fi 6E, ATX)

  • Supports 12th/13th Gen Intel Core, Pentium Gold, and Celeron Processors.
  • Supports DDR5 Memory, up to 7200+(OC) MHz.
  • Enhanced Power Design: 16+1+1 DRPS with 80A SPS, dual 8-pin CPU power connectors, Core Boost, Memory Boost.
  • Premium Thermal Solution: Extended Heatsink, MOSFET thermal pads rated for 7W/mK, additional choke thermal pads and M.2 Shield Frozr are built for high performance system and non-stop gaming experience.
  • High Quality PCB: 6-layer PCB made by 2oz thickened copper and server grade level material.
Check Stock

Cerwin Vega H71200.5D 1200W Max / 760 RMS 2Ω Stable 5-Channel Amplifier

  • Latest High-Efficiency Class D Technology.
  • Surface Mount Component Technology with 2-Layer PCB.
  • RCA “Pass Thru” output for easy system expansion.
  • Fully Variable Crossovers (12dB per octave).
Check Stock

Liftmaster K001A6837 Logic 4 Board Commercial OEM Genuine

  • 【Dimension】 -Size：200mmx150mm/7.87"x5.91"(L*W).
  • 【Material】 -The copper clad laminate is made of FR-4 glass fiber and copper, the number of layers issingle-sided.
  • 【Features】- The copper clad board is resistant to high temperature, is not easily oxidized, is not easily deformed, and is convenient for welding.
  • 【Application】 - PCB circuit boards are very suitable for making PCB circuit boards and models. It is widely used in product development, DIY experiment, maintenance, production, etc.
  • 【Noted】 -The product may be slightly scratched or dirty during transportation, which will not affect its use.
Check Stock