Top 200 Psi Gate Valve - BuyWiseBest.com

3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)

3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
IAPMO Listed to cUPC - "Lead-Free" Compliant.

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.

PEX elbow connections for easy installation without adaptors, reducing leak points.
Valve can be easily rotated 180° to accommodate supply lines from floor or ceiling.
Flush plug allows valve body to be tested and flushed without the presence of the valve cartridge (ships with trim).
Can be tested using flush plug with air (200 psi) or water (300 psi).
Stainless steel retaining ring with flats secures flush plug and cartridge, eliminating the need for screws.

This valve is used to prevent the back flow of fluids.
Maximum pressure rating 200 psi，200 WOG (water, Oil, gas).
This valve has a brass body with a stainless steel spring for long-lasting durability.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Scuba Refill Adapter with 36" quick disconnect filling whip hose..
Built for standard Scuba K-Valve, J-Valve and H-Valve..
Fill station compatible with standard 200bar / 300bar, 3000psi / 4500psi air tanks..
Made of high quality aluminium alloy, which is anti-rust and durable..
Filling compressed air or nitrogen to your small air tanks / paintball tanks from a larger cylinder..

1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.

Many uses including train and truck horns, light air tool use, tire inflation and more.
Includes pre-installed parts which is as follows, 165/200 PSI automatic pressure switch, drain cock, pressure safety release valve, and 1/2 inch....
Comes with the 480C which is a 200 PSI maximum working pressure, oil-less air compressor..
Replaceable/relocatable air filter element for harsh environments.
This system does not come with air horns or an air hose. Those items must be purchased separately..

Choice of Connections: Fast and easy installation without adaptors reducing leak points.
Available connections include Universal (male thread/female sweat), PEX Crimp, PEX Cold expansion, CPVC, and Stub outs.
Cast Brass Valve Body: Durable. Ideal material for prolonged contact with water.
Flat Back: Allows valve to be mounted flush against cross brace for easy and solid installation.
Test Cap: Allows valve body to be tested and flushed without the presence of the valve cartridge.
Can be tested using test cap with air (200 psi) or water (300 psi).
Stainless Steel Retaining Ring with Flats: Secures test cap/ cartridge in place and eliminates need for screws.
Flats make it simple to loosen ring for quick, easy insertion/removal of test cap/cartridge.
Exclusive Plaster Guard: Plaster guard is designed to protect valve and act as a guide during installation.
It can serve as mounting support for thin wall installations.
Back to Back Capability: Hot and cold can be reversed quickly and easily.
Wide Rough in Range: From 1-3/4 Inches to 2-3/4 Inches from finished wall to the back of the valve.
Includes Screwdriver Stops for easy servicing at the valve.

Higher PSI - Sealed with higher quality ASTM EPDM O-Rings and engineering plastic powder. So our ball valve can withstand a higher pressure(230 PSI) than general products(150-200 PSI)..
High Cost Performance: Pack of 2 full flow ball valve are highly cost-effective, and this premium ball valve can be used for many years, reduce your post-maintenance costs..
Full Port - The best full flow ball valve for your water project. Provide excellent performance in water engineering, pipeline facilities, agricultural irrigation, swimming pool and other commercial pipeline systems..
Easy to Operate and Install - The smooth inner sphere makes the handle easy to rotate. Perfect match with PVC pipe 1 1/2 inch Sch40. standard..
Perfect Sale After Service - We provide online service at any time. If there is any problem with the product, we can return or exchange the goods unconditionally or refund your full amount..

Thanks to the elbow and adapter with pre-applied thread sealant, this valve kit works on air compressors with 1/4 or 3/8 inch NPT drain valve..
The 10” braided steel hose is flexible which prevents breaking and kinks..
Featured a quarter turn drain valve, it makes draining water out of the compressor tank much easier and you don’t have to do that on your knees anymore..
Installation is simply enough and once the old peacock is removed, it will be threaded in with little difficulty..
Fittings are made of heavy duty brass which is corrosion resistant. Working Pressure: 175 PSI, Blasting Pressure: 475 PSI & Max Temperature: 200 ℉.