Top 201ford Escape Tow Hitch

AUDI Genuine Accessories Curt Triflex Brake Controller ZAW055204A

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 10,000 lbs. gross trailer weight, 1,000 lbs. tongue weight, 12,000 lbs. weight distribution capacity and 1,200 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 4 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, tow hook and other heavy-duty towing accessories.
  • FULLY TESTED. Every CURT class 4 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and durable black powder coat. The finishes co-cure together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This class 4 hitch offers a custom fit on select model years of the Ford E150, E250 and E350 Super Duty.
Check Stock

CURT 11405 Class 1 Trailer Hitch, 1-1/4-Inch Receiver, Fits Select Ford Mustang

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 1 hitch is rated for 2,000 lbs. gross trailer weight and 200 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this aftermarket tow hitch kit is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 1 hitch is designed to factory fit select model years of the Ford Mustang.
  • TESTED FOR SAFETY. Each CURT class 1 trailer hitch design is thoroughly tested, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specifications for safety on the road ahead.
  • Hitch, pin and clip, Ballmount not included.
  • Limited Lifetime Warranty to original purchaser.
Check Stock

CURT 13474 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Ford Bronco Sport, Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 3,500 lbs. gross trailer weight and 525 lbs. tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more.
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Aftermarket hitches are tested according to SAE J684 standards for the utmost safety while hauling.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This hitch offers a custom, factory fit on select model years of the Ford Bronco Sport.
Check Stock

CURT 14017 Class 4 Trailer Hitch 2-Inch Receiver Compatible with Select Ford F-150 Black

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 10,000 lbs. gross trailer weight, 1,000 lbs. tongue weight, 12,000 lbs. weight distribution capacity and 1,200 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 4 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, tow hook and other heavy-duty towing accessories.
  • FULLY TESTED. Every CURT class 4 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and durable black powder coat. The finishes co-cure together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This class 4 hitch offers a custom fit on select model years of the Ford F150.
Check Stock

CURT 12091 Class 2 Trailer Hitch, 1-1/4-Inch Receiver, Compatible with Select Ford Fusion, Lincoln MKZ

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch package is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 2 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack.
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this automotive tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 2 hitch fits select model years of the Ford Fusion and Lincoln MKZ.
  • TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
Check Stock

CURT 13193 Class 3 Trailer Hitch, 2-Inch Receiver for Select Ford Transit-150, Transit-250 and Transit-350

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 6, 000 lbs. gross trailer weight, 900 lbs. tongue weight, 8, 000 lbs. weight distribution capacity and 900 lbs. weight distribution tongue weight (limited to lowest-rated towing component)..
  • VERSATILE DESIGN. This class 3 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more..
  • FULLY TESTED. Every CURT class 3 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing..
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid Bonderite and highly durable black powder coat. The two finishes are co-cured together for exceptional resistance to rust, chipping and UV rays..
  • EASY TO INSTALL. Trailer hitch installation of this class 3 hitch is made easier with its vehicle-specific design. This hitch offers a custom fit on select models of the Ford Transit-150, Transit-250 and Transit-350, and it comes with all necessary hardware for a complete installation on the vehi....
Check Stock

Retired Air Force Custom Hitch Plug for 2

  • This trailer hitch cover plug is made of heavy duty black rubber, fits for standard 2"" x2"" receiver tube and hitch ball..
  • Hitch cover mounts on your trailer hitch with a friction fit, meaning no hitch pin or clip is required..
  • 2inch tow hitch cover, universal fit 2-inch x 2-inch receiver tube, compatible with Class 3 III and Class 4 IV and Class 5 receivers, compatible for Ford GMC Toyota Jeep Dodge Nissan Audi BMW Porsche Chevrolet Mercedes Benz Polaris ATV UTV..
  • This heavy duty rubber plug is designed to protect receiver tube in heavy weather, keeps the rain, dust, snow and ice from the hitch tube and protect the receiver tube from rust..
  • The hitch receiver cover is designed for optimal convenience, allowing you to install it in a moment, whenever needed. Just fit it into the hitch receiver and push it into place..
Check Stock

CURT 14055 Class 4 Trailer Hitch 2-Inch Receiver Compatible with Select Ford E-150 E-250 E-350 Super Duty Black,

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 10,000 lbs. gross trailer weight, 1,000 lbs. tongue weight, 12,000 lbs. weight distribution capacity and 1,200 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 4 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, tow hook and other heavy-duty towing accessories.
  • FULLY TESTED. Every CURT class 4 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and durable black powder coat. The finishes co-cure together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This class 4 hitch offers a custom fit on select model years of the Ford E150, E250 and E350 Super Duty.
Check Stock

CURT 120913 Class 2 Trailer Hitch with Ball Mount, 1-1/4-Inch Receiver, Compatible with Select Ford Fusion, Lincoln MKZ

  • DEPENDABLE STRENGTH. With a strong, welded steel build, this class 2 hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
  • HIGHLY VERSATILE. This class 2 trailer hitch kit has a standard 1-1/4-inch receiver and includes a ball mount with a 3/4-inch hole, allowing you to tow a small trailer or mount a cargo carrier or bike rack (trailer ball sold separately).
  • DUAL-COAT FINISH. For industry-leading rust, chip and UV resistance inside and out, this tow hitch is submersed in a liquid A-coat and co-cured with a durable black powder coat finish.
  • EASY INSTALLATION. This class 2 hitch kit fits select model years of the Ford Fusion and Lincoln MKZ.
  • TESTED FOR SAFETY. Each CURT class 2 trailer hitch design is thoroughly tested at our Detroit facility, using real vehicles in real-world conditions. Our hitches are tested to SAE J684 specs to give you confidence and safety on the road ahead.
Check Stock

CURT 31083 2-Inch Front Receiver Hitch Select Ford F-150 Expedition

  • VERSATILE RECEIVER. Add a useful hitch receiver to the front end of your vehicle with this front mount receiver hitch. The standard 2-inch receiver....
  • RELIABLE STRENGTH. This front hitch is rated for 5,000 lbs. GTW and 500 lbs. tongue weight. It is also rated for 9,000 lbs. straight-line pull....
  • TESTED BUILD. This front mount hitch is fully tested for your safety at our Detroit engineering facility. We test our front trailer hitch designs....
  • CORROSION-RESISTANT. For superior protection against rust, chipping and UV damage, this front hitch is covered in a dual-layer of rust-resistant....
  • EASY INSTALLATION. This front tow hitch is engineered with a vehicle-specific design to fit select models of the Ford Expedition and F-150.
Check Stock

CURT 14053 Class 4 Trailer Hitch, 2-Inch Receiver, Exhaust May Require Modification, Fits Select Ford E-Series Vans

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 10,000 lbs. gross trailer weight, 1,000 lbs. tongue weight, 12,000 lbs. weight distribution capacity and 1,200 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 4 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, tow hook and other heavy-duty towing accessories.
  • FULLY TESTED. Every CURT class 4 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and durable black powder coat. The finishes co-cure together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This class 4 hitch offers a custom fit on select model years of the Ford E150, E150 Econoline, E250, E250 Econoline, E350 Econoline and E350 Super Duty.
Check Stock

CURT 14355 Class 4 Trailer Hitch, 2-Inch Receiver, Fits Select Ford F-150, F-250, F-350, F-450 Super Duty

  • DEPENDABLE STRENGTH. This trailer hitch is rated for 10,000 lbs. gross trailer weight, 1,000 lbs. tongue weight, 12,000 lbs. weight distribution capacity and 1,200 lbs. weight distribution tongue weight (limited to lowest-rated towing component).
  • VERSATILE DESIGN. This class 4 hitch equips your vehicle with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, tow hook and other heavy-duty towing accessories.
  • FULLY TESTED. Every CURT class 4 trailer hitch design is tested in real-world, on-vehicle conditions at our Detroit engineering facility. Hitches are tested according to SAE J684 standards for the utmost safety and reliability while towing.
  • RUST, CHIP, UV-RESISTANT. This tow hitch is protected with a unique dual-coat finish of rust-resistant liquid A-coat and durable black powder coat. The finishes co-cure together for exceptional resistance to rust, chipping and UV rays.
  • EASY TO INSTALL. This class 4 hitch offers a custom fit on select model years of the Ford F150, F150 Heritage, F250, F250 Super Duty, F350 Super Duty and F450 Super Duty.
Check Stock