Top 22mm Deep Socket

ABN Twist Socket Set Lug Nut Remover Extractor Tool - 5 Piece Metric Bolt and Lug Nut Extractor Socket Tools

  • SOCKETS PROVIDE STRONG GRIP ON LUG NUTS: The ABN Twist Sockets Set Stripped Bolt Extractor Set allows you to bite into and remove worn locking nuts to....
  • USE WITH YOUR TOOLS: 1/2-inch square drive fits your wrench drives.
  • For use with ratchet, breaker bar, or hand wrench (not included).
  • PERFECT SIZE FOR YOUR NEEDS: These lightweight twist socket nut extractors includes 17MM, 19MM, 21MM, and 22MM bolt and nut remover sockets.
  • EASY TO USE: Choose an appropriate twist ratchet socket from the deep twist socket set then hit it with a hammer onto the damaged nut.
  • BUILT TO LAST: HRC 50-53 hardened alloy steel provides this twist socket lug nut remover set with maximum strength and durability.
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) v....
Check Stock

24 Piece Mechanics Tool Set - SAE & Metric

  • This 1/2-in drive mixed depth impact socket set contains 24 SAE and metric standard depth sockets, 24 SAE and metric deep sockets, 3 extensions, 3....
  • This set is intended for use with an impact tool to provide maximum installation of heavy duty fasteners.
  • Standard depth impact sockets include 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27mm as well as 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16,....
  • Deep impact sockets include 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 and 27mm as well as 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1....
  • 1/2-in drive accessory tools include a 3 impact extensions measuring 3-in, 6-in and 10-in, a 1/2-in drive impact swivel adapter, a 3/8-in drive impact....
Check Stock

TEKTON 1/2 Inch Drive Deep 12-Point Socket Set, 26-Piece (3/8-1 in, 10-24 mm) | SHD92204

  • Includes 11-pc. 1/2 in. drive deep 12-point sockets: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 in..
  • 15-pc. 1/2 in. drive deep 12-point sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
  • 12-point opening fits double hex (12-sided), hex, and square-shaped fasteners.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go.
Check Stock

NEIKO 02481A 1/4\ Drive Impact Socket Set, 30 Piece, Metric Sizes 4 – 15 MM, Deep and Shallow Sockets, Chrome Vanadium Steel, 3/8” to 1/4” Reducer, Hex Shank Socket Impact Adapter, Socket Wrench Set

  • ¼ DEEP WELL SOCKET SET: Quarter inch drive socket set is constructed of heavy duty Chrome Vanadium (CrV) steel and black phosphate coating for high torque impact applications. Standard and deep sockets have a high contrast laser-etched marking..
  • 6 POINT MM SOCKET SET: Six point hex socket tool set for applying optimal turning power on those stubborn bolts and fasteners. Mechanic tool set with chamfered socket has rounded corners to prevent round off and stripped sockets..
  • IMPACT REDUCER & ADAPTER: Includes a 3/8” drive to 1/4" drive reducer that is impact grade for use with a 3/8 ratchet or 3/8 impact wrench. 1/4 hex to 1/4 inch drive socket adapter to use with power tools, quick connect chuck or quick disconnect drill..
  • STORAGE CASE: Mini socket set come with a sturdy and strong blow mold carrying case that doubles as a socket organizer and features socket size labels. Small socket set holds extra deep sockets and standard sockets in one..
  • SIZES: 14 pieces of 1/4-inch drive standard impact sockets in 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14, & 15 millimeter.
  • 14 pieces of 1/4 in. drive deep impact sockets in 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm & 15mm..
Check Stock

Titan 21095 4-Piece 1/2-Inch Drive Non-marring Impact Deep Lug Nut Socket Set

  • 1/2-Inch Drive x 17mm, 19mm, 21mm and 22mm deep socket | 6-Point | 3-5/8-Inch overall length.
  • Impact grade lug nut socket is constructed of chrome-moly steel for strength and durability.
  • Features a non-marring core and sleeve that prevents damage to wheels, custom rims and lug nuts | outer sleeve can be removed for thin wall applications.
  • Hollow core design for use on longer wheel studs | color coded for easy identification.
Check Stock

TEKTON 3/8 Inch Drive Deep 12-Point Socket Set, 19-Piece (6-24 mm) | SHD91116

  • Includes 19-pc. 3/8 in. drive deep 12-point sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24 mm.
  • 12-point opening fits double hex (12-sided), hex, and square-shaped fasteners.
  • Socket geometry is designed to apply force to flat sides of fasteners and not the corners, preventing round-off.
  • Deep-length sockets reach into wells and accommodate the excess threads of longer shafts.
  • Extra-large die-stamped size markings are easy to read and can’t wear off.
  • Polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.
  • Four detent grooves provide a secure connection with the drive tool.
  • Beveled inner rim of the socket opening helps guide it smoothly onto fasteners.
  • Twist-to-Lock Socket Rail organizes and securely holds sockets in place, both for in your toolbox and on the go.
Check Stock

Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set-5 Pcs, 02 Oxygen Sensor Socket Offset Wrench Remover Tool,A7841F-FBA +Thread Chaser,by Lucky Seven

  • Oxygen Sensor Socket Wrench Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
  • Oxygen Sensor Socket Wrench Set Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires，Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines..
  • 5 Pcs Oxygen Sensor Switch Socket Wrench Kit and Thread Chaser Set-3 types of universal socket wrenchs cover various situations of oxygen sensor location,6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar..
  • Oxygen Sensor Socket Wrench kit-Including 3 oxygen sensor sockets and 2 thread chasers for cleaning and repairing damaged threads,oem oxygen sensor wrench socket,oxygen sensor wrench socket,o2 oxygen sensor socket wrench,o2 sensor socket wrench,oxygen sensor wrench set,oxygen sensor wrench tool,oxygen sensor wr....
Check Stock

TITAN 21094 1/2-Inch Drive x 22mm Non-marring Impact Deep Lug Nut Socket

  • Non-marring core and sleeve protects custom wheels and lug nuts from scratches and abrasion.
  • Attractive Green finish for easy identification.
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • Our New MotoBox has everything you need to make sure your bike is dialed in..
  • Designed for professionals and the weekend warriors, it's the perfect set up to have in the pit or in the back of the truck..
  • 12-Piece 1/4" Metric drive 6-Point socket set (4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm). 7-Piece 3/8" Metric drive 6-Point socket set (15, 16, 17, 18, 19, 20, 21mm). 5-Piece 1/2" Metric drive 6-Point socket set (22, 24, 27, 30, 32mm). 10" Groove joint water pump pliers. 6" Long nose pliers. 7" Heavy-duty diagonal side cutter. 5-1/2" Scissors. 4" Flush cutter. 6-Piece 1/4" Drive screwdriver set (SL3, SL4, SL5.5, SL6.5, PH1 & PH2)..
  • 15-Piece Metric combination wrench set (6, 7, 8, 9, 10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-....
Check Stock

NEIKO 02448A 1/2 Drive Master Impact Socket Set 65 Piece Standard SAE 3/8 -1-1/4 & Metric 10-24 mm Sizes Deep & Shallow Kit Includes Adapters & Ratchet Handle 1/2 Impact Socket Set

  • HIGH DURABILITY: The impact socket set 1/2 drive metric and standard is made of high impact grade components of this master kit are constructed of drop-forged premium chrome vanadium Cr-V steel to withstand extreme levels of torque changes against fasteners..
  • 6 POINT DESIGN: The 6-Point hex 1/2 impact socket set design prevents round-off on nuts and bolts under high torque exertion and hammering stress from the use of an impact wrench or electric wrench with a strong output..
  • DUAL MARKINGS: The impact socket set 1/2 drive has a highly visible laser-etched markings on the black phosphate finish makes it easy to identify drive socket sizes and measurements to allow for fast application, efficiency, and accuracy in your automotive workspace..
  • ORGANIZED CASE: The included impact socket set case is blow molded to fit each individual socket size and features labels for organized storage with secure lever locks to prevent opening accidentally at the job site..
  • SET INCLUDES: This complete shallow & deep impact socket set contains: 58 x 1/2" Drive sockets - SAE (Deep and shallow): 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-1/4", metric (Deep and shallow): 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24mm.
Check Stock

NEIKO 02330A 1/2 Impact Socket Set, 45 Piece Deep and Shallow Assortment, Metric Sizes 9mm to 32mm, Chrome Vanadium Steel, Extension Bars, Universal Joint and Adapter, 1/2\ Drive Deep Well Socket Set

  • 1/2 IMPACT SOCKET SET: The high impact grade components of this master kit are constructed of drop-forged premium chrome vanadium Cr-V steel to withstand extreme levels of torque changes against fasteners..
  • 6 POINT DEEP IMPACT SOCKET SET: The 6-Point hex socket design prevents round-off on nuts and bolts under high torque exertion and hammering stress from the use of an impact wrench or electric wrench with a strong output..
  • HIGH VISIBILITY SHALLOW IMPACT SOCKET SET: The highly visible laser-etched markings on the black phosphate finish makes it easy to identify drive socket sizes and measurements to allow for fast application, efficiency, and accuracy in your automotive workspace..
  • STORAGE CASE: The included socket set case is blow molded to fit each individual socket size and features labels for organized storage with secure lever locks to prevent opening accidentally at the job site..
  • INCLUDES: Sizes - (40) Deep and Standard Length Metric Impact Sockets: 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 27, 30, 32mm.
Check Stock