Top 25 Mm Air Chamber

Missouri Meerschaum - Country Gentleman Corn Cob Tobacco Pipe - Straight Bit

  • The pipe has a genuine, hardwood insert in the bottom of the bowl..
  • Length: 6.00 in. - 1152.40 mm Bowl Height: 2.25 in. - 57.20 mm Chamber Diameter: .75 in. - 19.05 mm Chamber Depth: 1.50 in. - 38.10 mm.
Check Stock

BACOENG Universal Vacuum Chamber Series: Standard 1.2 Quart

  • Universal Chamber Series: Traditioanl Heat Cured Silicone Gasket Chemically Resistant to Butane and Polar Solvents..
  • Service Kit include: 5 Feet Reinforced Vacuum Hosing+Adaptors+PTFE Tape.
  • Glycerin filled Industrial Vacuum Gauge (Shock resistant for shipping and accurate to within 0.5inHg) Measuring Range：0-29.25inHg(Equal to 14.3PSI/0.1Mpa/750mmHg).
  • High Strength Stainless Steel Container, Hydro Tested for Leaks.
  • Unique Metal Air Regulator (attaches to valve assembly, reduces air flow back into chamber, reduces noise, protect gauge).
Check Stock

JXINGY 14 Inch Electric Bicycle Tire 14x2.125 Non-Pneumatic Honeycomb Solid Tire

  • ✅ 100% ANTIPINCHAZOS: Proof of nails, crystals and arcenes in bad condition.
  • ✅ ULTRALIGHT: Lighter than most deck combinations + air chamber + rim bottom.
  • ✅ LONG DURABILITY: 6 km guaranteed although you can roll more than 10 km. ✅ MAINTENANCE FREE: Forget about maintenance and checking inflation pressure.
  • ✅ VARIETY OF COLORS: We have 12 different colors that will make your bike unique and look new.
  • ❗ COMPATIBILITY: Make sure you have a compatible rim inner width (ETRTO). ❗ Mini Veil 16 / 18 x 1.25 (Dual Size for Brompton) : 17-20 mm.
Check Stock

Free Swimming Baby Inflatable Baby Swimming Float Ring Children Waist Float Ring Inflatable Floats Pool Toys Swimming Pool Accessories for The Age of 3-36 Months(Blue, L)

  • ... supported by the strength of the shoulder so that the baby will not slide down. The BLUE one doesn’t have a seat,If you are looking for a float with leg support,please choose the YELLOW one..
  • ★【Convenient & Simple】Easy to inflate and deflate.folds easily for storage and transport,Double-decked air chamber design, first inflated the small air chamber , and then inflated the big airbag.
  • ★【Premium Quality】Adopt preferable PVC material with thickness of 0.25mm. It possesses waterproof, non-toxic and durable characteristics,The workmanship and design meet the requirement of toy international safety standard.
  • ★【Quality Guarantee】Each product is detected by gas.Pay attention to inflatable do not charge too full(80%-90% of inflating is enough),If you have quality problems, please contact us！Free Swimming Baby guarantee your baby floats will arrive without any issues or we will replace them for free. No Questions Asked.
Check Stock

Inflatable Boat Set 2-3 Person Thickened Fishing Boat Hard Inner Bottom Floor Boat with 3 Separate Air Chambers

  • ...he hull maxload:518 LBS + The inflatable bottom plate maxload:187 LBS)，Outside dimension：90‘’*50‘’，Inside dimension:63‘’*23‘’,Total weight:about 41 pound,Fishing have never been easier with the 2 built-in fishing rod holders.
  • SAFETY:Three separate air chambers, two on the hull and one on the bottom,if one of them is damaged,the other air chamber will not be affected,even if only one chamber is intact,it can still reach the shore safely..
  • MATERIAL：0.7mm thickened PVC clamping net material hull, strong and durable, not easy to deformation，The bottom plate added nylon wire，After inflating it, its hardness is close to that of the board，It is more stable when standing inside the boat, and the bottom plate also serves as a separate air chamber to provide additional buoyancy，If the inflatable boat breaks and leaks air,It can still stay afloat，One more layer of security for life..
  • In order to facilitate packaging folding, the air plug is in deflated state when leaving the factory, as the boat before inflatable must press the center of the high pressure valve spring rod turn right 90 ° or to the le....
Check Stock

Aluminum Tobacco Pipe Nails - Set of 6

  • 3 in 1 Tamper, Reamer & Pick tool set. Made of Stainless Steel and Rosewood..
  • Overall Size: 3.31" (L) x 0.69" (W) x 0.25" (T) / 84.12 mm (L) x 17.72mm (W) x 6.37mm (T).
  • Is great for cleaning & removing ash & other residue in the stem and shank as well as the bowl chamber..
  • The product has very stylish look, easy to use and very practical. Excellent choice for your liked pipe..
  • Portable, light weight and easy to carry. Weight: 1.25oz/35.44g.
Check Stock

Absolute USA VEGD12+ Dual 12' Universal Vented Ported sub Box Subwoofer Enclosure

  • Universal Fit Dual Chamber 12" Vented Ported Car Sub Box Subwoofer Enclosure.
  • 15MM MDF Black Carpet with Speaker Terminal Competition Grade High Performance Subwoofer Box Engineered to Sound Incredible.
  • Machine precision cut mounting holes. Top of the line Glue for extra durable adhesion. High quality Splver spring loaded terminals. Designed, tested, and engineered to work with most of today’s popular woofers..
  • Pneumatic Applied Brad Nails to pull tight and hold the MDF parts during the glue drying process and help assure a no-leak, no-rattle air chamber.
  • Premium Silver Push Spring Loaded Terminal Cups.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

4\ Axial Exhaust Fan, HoseVary 3000RPM 120mm DC Dual Ball Bearings Air Exhaust Vent Muffin Fan for DIY Cooling Project (120mm to 4\ Duct Adapter)

  • PWM VARIABLE SPEED: The speed is adjusted from 0%~100% by manual controlling of the dimmer.Equipped with the PWM controller, directly connect with the female socket of fan and select the desired speed level will start it..
  • QUIET & AGING-RESIST: The measurement of noise level is carried out in an anechoic chamber with the microphone positioned 1 meter from the air intake. Testing fan shall be hung in clean air . Noise background＜18dB . The average service life of the fan can be estimated when 90% of the fan can operate normally after aging under the rated voltage,25℃,65%RH dust-free environment.
  • MULTIPLE-APPLICATION: To meet the various applications as need, the kit included two ducting ends to mount in round pipes, such as growing tent, 3D laser experiment, 3D cutting ventilation, 3D spray paint to exhausting bad airs or help cooling. Using directly with the casing fan by two sides of mounting meshes equipped in any small areas or square pipes..
  • PRACTICAL KIT: Package included: 1 * DC12V Axial Fan (120x38mm),1 * 3V~12V US Plug Power Adapter, 2 * Metal Ducting Adapters (for 4-inch hose / pipe), 2 * Black Metal Meshes, 8 * Fastened Screws , 1 * English / Japanese User Manual. The "Hose Vary" team will response within 24-hour reply and....
Check Stock

PTSLKHN 5 Pairs of Eyeglass Nose Pads, Upgraded 15x8mm Soft Silicone Air Chamber Glasses Nose Pads, Screw-in Nose Pads Replacement Kit

  • Product Contains: 5 pairs of screw-in air chamber nose pads, 10 universal screws for nose pads, 1 piece 3-in-1 micro screwdriver..
  • These high-quality silicone nose pads are soft, are comfortable with no bad smells, and feature an air chamber design that helps to evenly distribute pressure and keep your glasses in place..
  • The upgraded hard-core design features a plastic backbone that is embedded in the nose pad, making it more stable and less likely to fall off. Diameter 1.0 standard stainless stee screws for normal nose pads replacement..
  • This 3-in-1 screwdriver has three different heads: 1.7mm Phillips, 1.7mm flat, 2.5mm Hexagon. The Phillips is perfect for eyeglass nose pad and frame screws removal, flat and Hexagon for backup, just in case..
  • We want you to be happy with your purchase. If you're not satisfied with your purchase, please contact us for a full refund or replacement..
Check Stock

Missouri Meerschaum - Missouri Pride Corn Cob Tobacco Pipe - 5th Avenue Straight Bit

  • The Legend is the best-selling corncob pipe in the world from the oldest and largest corncob pipe makers since 1869.
  • Smooth polished bowl with a coating that gives it a soft yellow color.
  • Available in 5th Avenue bowl shape with an amber straight bit that accept 6mm filters.
  • Approximate Dimensions: Length: 6", Bowl height: 1.75", Chamber diameter: 0.75", Chamber depth: 1.25".
Check Stock

BVV 10\ Vacuum Chamber Digital Heat Pad

  • 10Vacuum Chamber Digital Heat Pad Please Read Before You Buy! Chamber NOT Included, Sold Separately..
  • Heat Pad must fit correct size of the chamber! Fits 2&3 Gallon aluminum pots and 1.6 Flat Chamber This Digital Heat Pad will adhere to the bottom of a chamber vessel with a peel and stick backing. This unit will hold a temperature within a degree to the set temperature (dependent on the environment and air movement)..
  • This unit will hold a temperature within a degree to the set temperature (dependent on the environment and air movement)..
  • The temperature offset must be found to set the controller accurately..
Check Stock