Top 28mm Caps

KAMANINA Bronze Marbled Replacement Finials for 1 or 7/8 Inch Curtain Rods, M6 Screw Drapery Rod Finials, Set of two

  • 【Size Information】The installation diameter of the curtain rod head is a little inward, the diameter of the opening is about 29 mm, and the inside is about 27 mm. Please confirm the diameter of the curtain rod used before purchase. You can also wrap tape on the 2 ends of the curtain rod to accommodate smaller curtain rods..
  • 【High Quality】Curtain rod finials are made of high-quality plastic, light and durable, non-polluting and environmentally friendly..
  • 【Hollow Pattern】Decorative curtain rod caps with a vintage hollow lantern appearance, make your home window more fashionable and attractive. The gold coating on the outside may have a slight chromatic aberration in different light..
  • 【Easy to Use】Gold drape rod caps are very easy to install and remove, no need installation tools..
  • 【Wide Application】Plastic curtain rod finials are suitable for windows decoration in your living room, dining room, bedroom, and so on. Fit for approximately 28mm/1.1in diameter curtain rods..
Check Stock

Wheaton 986701 HDPE 20mL Liquid Scintillation Vial, with Polypropylene Metal Foil Lined Screw Cap Attached (Case of 500)

  • Screw caps attached to vial to maintain cleanliness.
  • Dimensions with cap attached: OD 28mm x H 61mm.
Check Stock

High Density Polyethylene Vials, 20ml Capacity, 22mm Poly Lined Plastic Screw Caps, White, 500 per Case

  • Made from Wheaton 180 low potassium borosilicate glass.
  • Background counts are consistent and low, ultraviolet transmission is high.
  • Screw caps attached to vial maintains cleanliness.
  • Dimensions with cap attached: OD 28mm x H 61mm.
Check Stock

High Density Polyethylene Vials, 20ml Capacity, 22mm Foil Lined Plastic Screw Caps, White, 500 per Case

  • Made from Wheaton 180 low potassium borosilicate glass.
  • Background counts are consistent and low, ultraviolet transmission is high.
  • Screw caps included but not attached to vial.
  • Dimensions with cap attached: OD 28mm x H 61mm.
Check Stock

Chemglass CG-4900-04 Borosilicate Glass 20mL Clear Scintillation Vial, with Solid PTFE Lined Cap (Pack of 144)

  • Made from Wheaton 180 low potassium borosilicate glass.
  • Background counts are consistent and low, ultraviolet transmission is high.
  • Screw caps attached to vial maintains cleanliness.
  • Dimensions with cap attached: OD 28mm x H 61mm.
Check Stock

Maymom Pump Parts Compatible With Spectra S2 Spectra S1, Incl Flanges (28mm) Valves Tubes Bottles Backflow Protectors, Not Original Spectra S2 Accessories Replace Spectra Flange Spectra Duckbill Valve

  • "Product Content: 28mm Flange (x2 Large Flange), Backflow Protector(x2), Tube(x2), Duckbill Valve (x2), Bottle with a Two-Piece Travel Cap (x2). All Products compatible with Spectra 9+, Spectra S1, Spectra S2 Breastpump. This kit does NOT include Dome Caps and Nipples..
  • "Maymom-made products. Not Original Spectra S1 Accessories. Not Original Spectra S2 Accessories. Not Original Spectra Pump Parts. All pump parts made by Maymom LLC..
  • "Maymom pump parts perform as well as OEM parts. Interchangeable and compatible with Spectra pump parts. Ideal Spectra replacement for Spectra Duckbill Valve (Spectra Valve), Spectra Backflow Protector, Spectra flange, Spectra Tubing, Wide-Neck Spectra Bottle. Maymom flange size available: 15mm, 17mm, 19mm, 21mm, 24mm, 25mm, 27mm, 28mm, 30mm, 32mm..
  • "The two-piece cap of Maymom bottle features rewritable surface top for labeling date or baby's name for daycare or daily storage use. Write with regular ball pen or dry erase marker. Erase with soapy water..
  • "Comply with FDA regulations for plastic materials that contact food. Material does NOT contain BPA. Can be sanitized with, boiling water, water steam or microwave-steam bags..
Check Stock

Mudder 31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Silver)

  • Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.
  • Movement size: shaft length is 31 mm (1-1/ 5 inch).
  • Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
  • Center of hole hand size: hour hand is approx. 90 mm (3.5 inch).
  • minute hand is approx. 120 mm (4.7 inch).
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: when you install it, please keep the hour hand and minute hand parallel.
Check Stock

31 mm Long Shaft Quartz Clock Movement DIY Clock Repair Kit (Black)

  • Long spindle clock: good handwork DIY clock replacement movement parts with metal hook, which meet your installation needs.
  • Movement size: shaft length is 31 mm (1-1/ 5 inch).
  • Jump second movement, suitable for 16 - 21 mm (5/ 8 - 4/ 5 inch) thickness clock panel.
  • Center of hole hand size: hour hand is approx. 90 mm (3.5 inch).
  • minute hand is approx. 120 mm (4.7 inch).
  • Wide application: they are fit for cross-stitch, three-dimensional embroidery, craft clock, frame-less draw clock, and specially suitable for DIY quartz wall clock replacement movement parts, etc..
  • Warm notice: when you install it, please keep the hour hand and minute hand parallel.
Check Stock

Wheaton 986560 Borosilicate Glass 20mL Liquid Scintillation Vial, with 24-400 White Polypropylene Foamed Polyethylene Lined Screw Cap Attached

  • Made from Wheaton 180 low potassium borosilicate glass.
  • Background counts are consistent and low, ultraviolet transmission is high.
  • Screw caps attached to vial maintains cleanliness.
  • Dimensions with cap attached: OD 28mm x H 61mm.
Check Stock

Altland Aluminum Car Battery Tie Down Bracket (Matte Red)

  • Matte Red CNC Machined Aluminum Battery Tie Down.
  • Overall length - 8.58" (218mm). Bolt hole center-to-center - 7.48" (190mm).
  • Designed for batteries 6.89" (175mm) wide or slightly narrower..
  • Fits most group 21, 22F, 22HF, 22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, 48, 49, 85, 86, 90, 91, 92, 93, 95R, 96R, 97R, 98R, 99, 124, and 140R batteries..
  • This tie down will NOT fit between raised vent caps on the surface of some batteries. Please measure your battery before ordering..
Check Stock

12888 High Torque Quartz Clock Movement Replacement Parts with 350 mm / 13.78 Inch Long Spade Hands

  • Clock movement replacement: high torque clock with hook, long shaft, drive long clock hands (10 mm to 450 mm)..
  • Movement size: Total shaft length is 23 mm (29/32 inch),thread length is 12 mm (15/32 inch),suitable for 4 - 8 mm (5/ 32 - 5/16 inches) thickness clock panel..
  • Center of hole hand size: hour hand is approx. 174 mm (6.85 inch).
  • Minute hand is approx. 350 mm (13.78 inch).
  • Second caps is approx. 7 mm (0.28 inch)..
  • DIY clock supplies: the complete clock movement kit is suitable for repairing or making a clock, serving as good replacements for large and thick clock frames..
  • Warm notice: when you install them, please keep the hour hand and minute hand parallel.
  • And please do not use too much pressure to avoid bending them..
Check Stock

Vortex Optics Defender Flip Cap Set - Eyepiece E-10 (41.5-46mm) & Objective Lens Cover O-24 (28-31 mm)

  • Virtually indestructible, the Defender flip caps are the most versatile and durable on the market, these are the last flip caps you'll ever need. Made in the USA..
  • A stainless steel spring flips the Eyepiece into multiple stop positions: vertical, 45 degrees and 90 degrees. The vertical position is for inserting your dope disk in to have easy access to while shooting. Dope disk NOT included..
  • The E-10 fits all Vortex Riflescopes EXCEPT the 1-inch tube Viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41.5-46 mm | 1.6-1.8 inches.
  • A stainless steel spring flips the O-24 cap into multiple stop positions at 45 and 90 degrees. Outside diameter: 28.25-31.25 mm | 1.1-1.2 inches.
  • Objective-24 fits: RZR-16003, RZR-16004, RZR-16005, PST-14ST-M, PST-14ST-A, PST-43111, PST-1605, PST-1607, SE-1624-1, SE-1824-1, CF2-31035, CF2-31037, CF2-31047.
Check Stock