Top 2mazda Rxaux Input
Diamond Audio MICRO4V2 4-Channel 600 Watts RMS Class D Amplifier
- Ultra-compact, high density aluminum alloy chassis provides superior thermal stability | Four layer, glass epoxy circuit board for enhanced performance and reliability | Full Range Class D amplifier technology | Bridgeable for high power operation (CH1+CH2/CH3+CH4) | Balanced differential inputs for superior noise rejection.
- Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Input selector switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
- RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
- Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level....
Check StockResMed AirMini DC Converter 38839
- ⚠️⚠️⚠️❤Attention: ⚠️⚠️⚠️❤1.If the vehicle charger works abnormally, please open its DC terminal to check whether the fuse tube is damaged. If so, please replace the 250V 16A fuse tube, then the product can be used normally. ⚠️⚠️⚠❤2.When the vehicle charger is connected to the equipment, it can support the instantaneous maximum input voltage peak value of 10V-30V..
- ⚠️⚠️⚠️❤3.If the product is applied on other devices than the vehicle, the DC input shall meet the following power: When its DC input is 12V, the input current should no less than 8.3A.
- When its DC input is 24V, the input current should no less than 4A, Otherwise, the vehicle charger may not work..
- Input DC: 12V-24V (9–32V DC MAX) Output:24V 3.75A 90W.
- Compatible With ResMed Airsense 10 Series: AirSense 10, AirSense 10 Elite, AirSense 10 AutoSet, AirSense 10 AutoSet for Her CPAP Machine with HumidAir Heated Humidifier.
- Fits Resmed CPAP and BiPAP Machines S10 370001 +24V 3.75A 90W.
- ResMed AirCurve 10 Series CPAP and BiPAP machine: AirCurve 10 S BiLevel Machine, AirCurve 10 VAuto BiLevel Machine with HumidAir Heated Humidifier.
Check StockAideepen 1200W 20A DC Converter Boost Car Step-up Power Supply Module Adjustable Voltage Converter 8-60V to 12-83V
- 【Features】Input overcurrent protection.
- 【DIY projects】It adopts 7 electrolytic capacitors and a 33MM high-power iron-silicon-aluminum magnetic ring to prevent over-temperature magnetic saturation under high current conditions. Use a piece of aluminum radiator on the back to dissipate heat ,Reserve fan mounting holes, suitable for more DIY projects..
- 【Adjustable Voltage 】1200W 20A DC converter boost Input voltage range is DC 10-60V, Output voltage range is DC 12-80V.can be arbitrary adjustable.
- Input current: 0.5-20A (MAX),Max output power is 1200W.(exceeds 15A, please add fan cooling).
- 【Output Power】Input voltage * 20A, such as: input 12V * 20A = 240W, input 24V * 20A = 480W,input 60V * 20A = 1200W Note: Do not use the short-circuit output method to adjust the current. It is recommended to use a smaller adjustment range..
- 【Widely Application】can be used for high power solar street lamp driving, various LED lighting CV driving, vehicle-mounted and mobile device power, DIY adjustable CV CC power, solar power charging, and various batteries charging..
Check StockGustard A26 DAC MQA Dual AK4499EX AK4191 with Streamer/Renderer XMOS DSD512 PCM768K MQA384K IIS Balanced Audio Decoder(Sliver)
- 1.Proprietary R2R + DSD Architecture 2.True balanced 24BIT R2R + 6BIT DSD (32 steps FIR Filters) 3.Native DSD decoding with 0.01% precision resistors.
- 4.FEMTO Crystal 45.1548MHz, 49.152Mhz 5.Encapsulated Ultra Low Noise Power Supply 6.Adaptive FIFO Buffer Reclocking 7.New Improved DSP Digital Signal Processing FPGA Code.
- 8.DSD1024, PCM1536 Supports On USB & I²S Input 9.Proprietary USB Audio Solution via STM32F446 Advanced AMR Based MCU 10Licensed Thesycon USB Driver For Windows Platform 11.Driverless On Mac & Linux.
- 12.Dual AES/EBU Input Supports 13.Sharp/Slow Filters Option 14:I²S Pinout Configuration 15: I²S DSD Channel Swap Configuration 16:I2S INPUT.
- PONTUS comes with a LVDS I2S input over the HDMI connector . Despite the I2S input has noindustrial standard , it is probably the best digital input interface to-date . NOTE : DENAFRIPS cannot guarantee the compatibility with other 12s devices . DSD DSD64-DoP On All Input DSD1024 On USB & I²S Input Only.
Check StockRockville RKI65BT Dual UHF Wireless Microphones+Bluetooth Karaoke Mic Interface, Black
- Rockville RKI65BT Dual UHF Wireless Microphone w/ Karaoke Interface+Mic Mixer. Connects to any home audio receiver, television iPads, computers, and more. Bluetooth input. 3.5 mm aux input..
- Optical input. Coaxial input. ¼” TS mix output Output passes through the signal of all the mics, as well as any input device. 3.5 mm aux output passes through the signal of all the mics, as well as any input..
- 2 UHF wireless microphones with 8 switchable frequencies. Each mic has a nice heavy feel to it and has a digital display making it easy to switch frequencies. Adjustable echo level. Adjustable tone control. Adjustable music input volume..
- Independent adjustable Mic levels. Wireless frequency range:. Mic A: 556.1 558.4 560.7 562.2 564.5 566.8 568.3 570.6. Mic B: 574.1 576.4 578.7 580.2 582.5 584.8 586.3 588.6..
- Number of channels: 8. THD: 0.5%. Signal/Noise ratio: 90dB. Frequency response : 30 Hz - 18kHz ±3dB. Operating range: 200 Feet. Transmitting Power: 10dBm. Power Supply: 3V (2 AA Batt). 100-240V compatible with included micro USB power cable (5 feet).
Check StockRockville BLUAMP 150 Home Stereo Bluetooth Amplifier Receiver Optical/Phono/RCA
- Rockville BLUAMP-150 2-Channel Home Stereo Bluetooth Amplifier..
- 4 Ohms: 75 x 2 watts RMS and 300 x 2 watts peak. 8 Ohms: 40 x 2 watts RMS and 160 x 2 watts peak. Plays Bluetooth/USB/SD. RCA aux input. Phono RCA input for turntables. Optical input. (2) 1/4" Mic inputs for Karaoke with Echo control and mic volume control..
- (2) sets of RCA Audio Outputs to connect to a subwoofer or another amplifier. Built in Bluetooth 5.0 with 33 foot range. 2 sets of binding post speaker output terminals. Bass/Treble/Balance/Mic Volume/Mic Echo and Master Volume controls..
- Built-in Cooling Fan. Built-in Pre-Amplifier with low distortion. Class D circuit with great sound quality. Solid metal construction with brushed aluminum front panel. Multi function volume knob . LCD Display / Touch Buttons. Frequency Response (±3dB): 50 Hz- 20 KHz..
- AUX Input Impedance: 10k Ohms. AUX Input Sensitivity: 300mV. Phono input impedance: 47K. Phono input sensitivity: 20mV. Output Impedance: 4-8 ohm. Total Harmonic Distortion(THD): ≤0.5%. Signal-to-Noise Ratio(S/N): ≥78dBA. USB: Supports WAV/MP3/WMA. 110-220....
Check StockSony PCMD100 Portable High Resolution Audio/Voice Recorder,Black
- Offers solid state storage, Built-in electret condenser microphones.
- Native recording including DSD, WAV and MP3.
- Simple uploading to computer, Supports USB 2.0.
- "Built-in Mic: Electret condenser microphones. Max input level: 128 dB SPL. Frequency response 20 Hz to 20 kHz.
- Mic Input (Stereo Mini Jack): Input impedance: 22 k ohm, Rated input level: 2.5 mV.
Check Stock6 Beyerdynamic DT-880-PRO-250 Studio Recording Headphones+Presonus Headphone Amp
- Package Includes: (6) Beyerdynamic DT-880-PRO-250 Semi Open Studio Reference Monitor Headphones. (1) Presonus HP60 6-Channel Amplifier Headphone Amp w/ Talkback & A/B Input Mix. Features: Beyerdynamic DT 880 Pro Professional Studio Headphones. Semi-open, diffuse-field studio headphone. Analytical sound. Comfortable fit due to rugged, adjustable, soft padded headband construction. Robust, easy serviceable construction as all parts are replaceable. Single-sided cable.
- Velour, circum-aural (around the ear) ear pads. Supplied in a carrying bag. Details: Transmission type Wired. Headphone design (operating principle) Semi-open. Headphone impedance 250 ohms. Headphone frequency response 5 - 35.000 Hz. Nominal sound pressure level 96 dB. Construction Circum-aural (around the ear). Cable & plug Coiled connecting cable with mini-jack plug (3.5 mm) & adapter (6.35 mm). Net weight without packaging 295 g.
- Click Here To View The Specification Sheet (Link Opens In A New Tab). Click Here To View The User Manual (Link Opens In A New Tab)..
- PreSonus HP60 6-Channel Amplifier Headphone Amp with Talkback and A/B Input Mix. Six independent ultra low noise, high output headphone amplifiers (150 mW per channel). Two sets of stereo inputs (A and B) with balanced TRS connector....
Check StockJuried Engineering TL081CP TL081 High Slew Rate JFET-Input Operational Amplifier Op-Amp IC Breadboard-Friendly DIP-8 (1 Piece)
- The TL081CP JFET-input operational amplifier family is designed to offer a wider selection than any previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit..
- Low Power Consumption: 1.4 mA/ch Typical, Low Input Bias Current: 30 pA, Typical Low Input Offset Current: 5 pA Typical, High Slew Rate: 13 V/μs Typical.
- Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% Typical, Wide Common-Mode and Differential Voltage Ranges, Common-Mode Input Voltage Range Includes VCC+.
- High Input Impedance: JFET Input Stage, Latch-Up-Free Operation.
- Example Applications: Tablets, White goods, Personal electronics, Computers.
Check StockDometic CF-025DC Portable Freezer/Refrigerator Slim/Tall, Gray
- Slim and Tall this model fits into narrow spaces.
- 23 Liter capacity holds 27, 12 ounce cans.
- Strong injection molded cabinet, Deep freeze functionality.
- Two-Stage battery monitor and Upright storage of 2-liter bottles.
- Input voltage (AC) 100-240 V ,Input frequency 50/60 Hz ,Rated input current (AC) 1.3-07A AC100-240V A ,Rated input current (DC) 7A DC12V/3A DC24V A ,Input voltage (DC) 12/24 V.
Check Stock2 Rockville RPG10 10\ Powered 600W DJ PA Speakers+2 Subwoofers+Mounting Poles
- ...180 watts. Rms power: 90 Watts. Built-in USB (2. 0). Built in TF card reader. Lcd display for MP3 player.
- Built-in FM radio tuner. Built-in Bluetooth. Bluetooth pairs in under 4 seconds and has a 35 foot range! High power Class D amplifier is extremely efficient and powerful.
- 5 band equalizer on MP3 player. Xlr audio input. ¼ " Audio input. 3. 5mm line input. 2 mic input (1/4"). 1 Line input for guitar or any audio device or instrument (1/4").
- 1 RCA Input. 1 RCA output. Guitar input volume control. Mic volume and echo controls. Bass/ Treble/ Volume controls. Record function will record your output onto the SD card or USB.
- Mic priority option gives you the option to lower the music when you talk into the mic or you can talk/sing along with the music. Wireless VHF mic receiver built in with 1 microphone included.
- Built-in 12v-7. 5AH battery for portability. Speaker can play for 4-8 hours per charge depending on volume level. Ac power input with built-in battery charger. Built-in wheels and carry handles for easy transport.
- Big power 8" Woofer with ASV voice coil. 3" Large tweeter gives incredible highs! Computer tuned circle port gives added bass punch. Frequency response: 40Hz &dash.
Check StockLD Systems Vocal Effects Processor (LDFX300)
- Microphone input for dynamic and condenser microphones, 16 digital effect presets in 16-bit quality.
- Low-noise instrument input with high input impedance for acoustic guitars, bass guitars or other instruments.
- Separate FX sends for both channels, additional FX loop for the instrument input, HPF and +48 V phantom power for microphone input.
- Signal/peak LEDs for both channels and clip LED for the effects, FX MUTE pedal for muting effects.
- MUTE ALL pedal for muting outputs, Balanced and unbalanced output, Operated on 9 V battery or optional power supply.
Check Stock