Top 2pc Threaded Ball Valve

New FloodStop for Water Heater/Whole House FS 1.00-NPT v4 Lead Free

  • Motorized Full-Port Ball Valve (1 inch NPT pipe threaded, valve length: 4 inches).
  • Control Unit (uses Battery Backup 4 X AA Size not included).
  • One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
  • Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.
Check Stock

Watts Brass & Tubular 2T-M2 Washing Machine Water Shut Off Valve

  • WASHING MACHINE SHUT OFF VALVE: This manual washing machine shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine..
  • WATER SHUT OFF VALVE: It prevents the washing machine hoses from bursting preventing water damage in the home. Inlet adapter fittings allow either 1/2″ threaded or 1/2″ solder copper x 3/4″ washing machine hose threads on hot & cold-water outlets..
  • SINGLE LEVER CONTROL SHUT OFF VALVE: It is manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses.
  • INSTALLATION: It can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places..
  • BALL-TYPE DESIGNED VALVE: The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves..
Check Stock

Aupoko R134A R12 Valve Core Quick Remover Installer, Air Conditioning Adjustable High Pressure (Red) and Low Pressure (Blue) Valve Core Tool, 2 Pack

  • ☀ ADJUSTABLE --- The R12 valve core quick remover installer is adjustable to fit the different valve core. Good for vehicle/car/auto air condition, household air conditioner, HVAC Maintenance or repairing..
  • ☀ WELL-DESIGN --- Built-in stainless-steel ball valve: the well-designed ball valve and threaded remover lets the user block off the system while changing the valves cores, allowing for no refrigerant loss..
  • ☀ 1 YEAR WARRANTY --- Valve Core Quick Remover Installer sets are made by high quality brass alloy, last long.
  • easy to operate and install, strong sealing for durability and safety. We offter 12 months warranty, if it can’t work normally during the warranty time or any other question, please feel free to contact us, we will refund or reship for you without any reason..
Check Stock

New FloodStop Multi-Purpose FS 1/2-NPT v4 (Lead Free)

  • Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded).
  • Control Unit (with Battery Backup 4 X AA Size).
  • One output contact (normally open) that can be connected to an Alarm, Home Automation or Auto-Dialer systems if desired.
  • Output Contact Wires - approx 3ft to valve and approx 7ft to sensor.
Check Stock

Lichamp HVAC R410A Manifold Gauge Set AC R134A, Freon R22 R32 410A 134A Diagnostic Manifold Gauge with Hose Kit Air Conditioner Refrigerant Recharge Kit

  • 1. Multifunctional A/C Gauge Set, professional 3 way automotive air conditioning diagnostic manifold gauge set will compatible with R134 R22 R32 R410 refrigerants, perfect for AC freon charging, evacuation, diagnostic check and recovery work..
  • 2. Extra large and colored dials with fahrenheit degree unit is easy to read, gauge rated 800psi (red) and 550psi (blue) max pressure. Sight glass design will help you see the flowing liquid refrigerant, when charging the refrigerant..
  • 3. Include 4 pieces extra long 5FT and high impact hose, thickening hose body with precise valve core depressor and 45 degree bend on one end for convenient access. Hose rated 800psi max max working pressure and 4000psi burst pressure..
  • 4. Precise movement with upgraded gauge shell, stands up to heavy use and accidental drops, all metal parts made from durable bass and aluminum materials. Great for your home garage or mechanic shop..
  • 5. Come with every thing you need for a efficiently ac charging work, package include: 4 valve gauge, 4pc hoses, 2pc Adjustable R134A Adapters, 2pc R410A liquid safety valve, adjustable can tap, 2pc tank adapters, R410a swivel adapter, calibration screwdriver, valve core remover, gloves.
Check Stock

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut-Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

  • PVC MATERIAL - PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project....
  • THREAD & 150 WOG - Female threaded for connecting to male threaded pipe fittings. 150WOG working pressure, suitable for irrigation and water supply..
  • SAFETY - T handle for manual on/off control, easy operation.
  • Santoprene seats and stem packing reduce the risk of leakage..
  • ASTM - 1-1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste....
  • DURABLE - Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life..
Check Stock

Sioux Chief 696-1021GF Ox Box Gas Outlet Box 1/2 NPT White

  • Box is available for ½" or ¾" iron-pipe applications or ½" CSST applications in both standard and fire-rated products.
  • ¼-turn ball valve for easy, secure, accessible operation.
  • Recessed box is made of high-impact ABS providing the strongest finished installation for all gas appliance needs.
  • Valve has CSA certification to ANSI Z21.15-1997 / CGA 9.1-M97.
Check Stock

Sioux Chief 696-1031GF Ox Box Gas Outlet Box 3/4 NPT White

  • Box is available for ½" or ¾" iron-pipe applications or ½" CSST applications in both standard and fire-rated products.
  • ¼-turn ball valve for easy, secure, accessible operation.
  • Recessed box is made of high-impact ABS providing the strongest finished installation for all gas appliance needs.
  • Valve has CSA certification to ANSI Z21.15-1997 / CGA 9.1-M97.
Check Stock

DERNORD 1/2\ Stainless Mini Ball Valve Female x Male NPT Thread with Stainless Steel Handle Pack of 2

  • 0.5 Inch NPT Female&Male threads for connecting to male threaded pipe fittings.
  • SUS316 body and ball for extra strength and corrosion resistance.
  • Inline valve for connecting two pipes going in the same direction with Double-seal system.
  • Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation.
  • Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing).
Check Stock

4 Way Gas Distribution Co2 Distributor Manifold With 5/16 inch Barb/Stem Splitter Beer Integrated Check Valves for Homebrew Beer Making Brewing Tool

  • ???? Gas Manifold, Machined from a single piece of aluminum with built-in check valve protects your shunt and prevents gas backflow..
  • ???? Designed with a 2-point screw hole on the top for easy installation to other equipment. 5/16″ threaded ports barbed inlet and 5/16″ barbed outlets..
  • ???? The distributor allows you to split the gas supply into multiple lines. Each line has its own shutoff valve. Chrome Plated valves with spring loaded Ball check valve. Run with 4 lines from one CO2 source..
  • ???? Due to the one-way valve mechanism, the pressure drop between the ball valves in these manifolds is approximately 2 psi. You will need to set the pressure on the regulator to 2 psi above the pressure required in the keg.).
  • ???? Made of prime aluminum, brass and stainless steel material, which is extremely durable. MONEY-BACK GUARANTEE -customer satisfaction is our #1 policy!. If you are not satisfied with our product or if you experience any issues, Please contact us.
Check Stock

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

  • 1-1/2’’ - Meets ASTM and ANSI standards.
  • Maximum pressure rating of 150 psi at 73°F.
  • Santoprene seats and stem packing reduce the risk of leakage.
  • NPT female threaded for connecting to male threaded pipe fittings.
Check Stock

SHMONO Inline PVC Ball Valve 1-1/2 inch Compact Single Handle Water Shut-Off Valves Female Thread x Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

  • Maximum pressure rating of 150 psi at 73°F.
  • NPT female threaded for connecting to male threaded pipe fittings.
  • 1-1/2’’ - Meets ASTM and ANSI standards.
Check Stock