Top 2port Wall Mount Patch Panel

iwillink 2-Pack RJ45 connectors Cat6A Tool-Free Shielded RJ45 Termination Plug Connector, Zinc Alloy Metal Housing Ethernet Toolless Plug for 23~26AWG SFTP/UFTP/FUTP Cables

  • Toolless Termination - 24 Port Cat6 pass through Patch Panel came with couplers making it easier to connect the cables without any punching down. Simply plug the Cat6 cable into the 24 RJ45 coupler jacks on either side of the Ethernet panel..
  • Gold Plated Keystone - Gold-plated contacts ensure corrosion-free connections and improve connector durability. This patch panel meets and exceeds industry standards to support better network connections up to 10G Ethernet speed..
  • Rack Mountable - Install this Ethernet patch panel in a standard 1U (1.75") height universal 19" rack, cabinet or wall bracket..
  • Easy Repair - The keystone of coupler patch panel are removable if necessary for replacement or upgrade.Meanwhile, if need expand in the future, you can easliy replace cat6 coupler with other coupler such as fiber adaptor, coax coupler, HDMI, VGA and so on..
  • Detachable Back Bar - This patch panel wall mount is made of cold-rolled thick steel coverd by strong,painting and sanding ABS surface.It can effectively improve the working stability of the network connection port, and avoid the occurrence of network failures caused by loose cornerstones and loose cables..
Check Stock

Tripp Lite 24-Port Cat6 / Cat5 Ethernet Patch Panel, Feedthrough Patch (RJ45 to RJ45), 1U Rackmount, Cable Management Bar, (N254-024)

  • 24 PORT: Tripp Lite’s Cat6 Feed-Through 24-port patch panel provides patching without punching down bulk wire to the back of the panel..
  • CAT6/CAT5 PATCH PANEL: Cat6 RJ45 Jacks on both sides of the panel..
  • CERTIFIED: Fully meets or exceeds Cat6 specifications - works with USOC, T568A, and T568B wiring..
  • EASY INSTALLATION + CABLE MANAGEMENT: 19" width mounts easily in 2-Post Relay Rack, or a Wall-Mount Hinged Rack. Detachable cable management bar keeps patch cables neat and tidy on the back of the panel..
Check Stock

StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)

  • 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • maximum weight capacity of 44 lbs [20kg].
  • EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check Stock

Tripp Lite - N060-004 4U Hinged Wall Mount Patch Panel Bracket (N060-004) Black

  • 4U Wall-Mount Hinged Patch Panel Bracket.
  • Keyholes on 16-inch centers plus through-the-wall cabling cut-out.
  • Accepts any standard 19inch Patch Panels.
  • TAA compliant for GSA Schedule purchases.
Check Stock

StarTech.com 8U Wall Mount Patch Panel Bracket - 13.75 inch Deep - 19\ Patch Panel Rack & 1U Server Rack Shelf - Universal Vented Rack Mount Cantilever Tray, Black (CABSHELFV1U)

  • Product 1: 8U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • Product 1: EASY TO INSTALL: The 8U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • Product 1: COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • Product 1: EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
  • Product 2: UNIVERSAL 19'' FIT: This 1U vented server rack mount shelf is designed to fit virtually any 19in server rack and can accommodate an internal depth of 10in (25cm) for your data, IT, networking, or other non-rack mount equipment.
  • Product 2: MAXIMIZE VENTILIATION: The vented shelf plate on th....
Check Stock

Cable Matters UL Listed Mini 12-Port Vertical Patch Panel with 89D Bracket

  • Mini 12-port patch panel supports unshielded (UTP) 22 to 26 AWG solid or stranded cables with 180 degree oriented RJ45 jacks.
  • Compact 10 x 2.25 inch footprint is ideal for installing in tight spaces in a network closet or under a stairwell.
  • Wall mount the panel with the included snap-on 89D brackets and mounting screws.
  • Made for Cat 6a cabling, but backwards compatible with Cat 6, Cat 5e and Cat 5 cabling..
  • 10 Gigabit Ethernet rated patch panel offers identical performance to a 19 inch rack sized 10 Gig network patch panel in a small form factor.
  • 10 Gig rated network performance meets or exceeds TIA 568-C.2 while maintaining backwards compatibility.
  • Dual IDC termination blocks hold the cable in a star configuration for better pair isolation and accommodate either 110 or Krone impact tools.
  • Soho with style for a professional looking structured cabling solution in a home or small office network.
  • Pre-wire up to 12 locations and then Plug & play with standard RJ45 patch cables for connecting a LAN, video and audio streaming, IP camera surveillance and more.
  • Label spaces on the front provide writeable areas for easy identification and a professional looking installation.
  • Durable construction patch panel is built with a black-painted steel panel and gold-plat....
Check Stock

C2G/Cables To Go 03859 24-Port Blank Keystone/Multimedia Patch Panel, Black

  • Customize your networking setup with this 24-port blank keystone patch panel. 2U size is easy to mount & use..
  • Each panel accepts virtually all snap-in jacks, including Cat6. Use keystone jacks and inserts to configure your panel to accommodate a variety of setups..
  • Made from thick gauge metal to support your cables. After install, these patch panels sit flush for a clean, rock solid finish.
  • Clear numbering on the front provides a quick, easy way to identify cable runs..
  • Built for universal rack compatibility. Mounts to any standard 19-inch relay rack, cabinet or wall bracket..
Check Stock

C2G/ Cables To Go 03860 32-Port Blank Keystone/Multimedia Patch Panel, Black, Black

  • Customize your networking setup with this 32-port blank keystone patch panel. 2U size is easy to mount & use.
  • Each panel accepts virtually all snap-in jacks, including Cat6. Use keystone jacks and inserts to configure your panel to accommodate a variety of setups.
  • Made from thick gauge metal to support your cables. After install, these patch panels sit flush for a clean, rock solid finish.
  • Clear numbering on the front provides a quick, easy way to identify cable runs.
  • Built for universal rack compatibility. Mounts to any standard 19-inch relay rack, cabinet or wall bracket.
Check Stock

Iwillink (10-Pack) RJ45 Coupler and Cat6 Ethernet Cable 5 ft (5 Pack)

  • Install this Ethernet patch panel effortlessly in universal 19" racks, cabinets, or wall mount brackets with 1U (1.75") standard height..
  • Heavy duty network patch panel 24 port supports Ethernet, made for Cat 6 cabling, compatible with Cat 5e /Cat 5..
  • Gold plated contacts ensure a correction free connection.Numbered ports and color-coded T568A and T568B wiring diagram give quick reference.White space for easy marking and identification..
  • Universal networking compatibility: Cat 6 Ethernet patch cable uses an RJ45 connector to provide universal connections from computers, printers, servers, routers to network media players, network storage devices, VoIP phones, and other standard office equipment..
  • Premium quality materials: The CAT-6 Ethernet patch cable gold-plated contacts and strain-relief boots provide durability for accurate data transfer and corrosion free connections.Meets or exceeds Category 6 performance in compliance with the TIA/EIA 568-C.2 standard..
Check Stock

Tripp Lite Cat6 Wall-Mount PoE+ Compliant Patch Panel 12-Port 110/Krone 568A/B RJ45 Ethernet TAA (N250-P12)

  • 12 PORT CAT6 PATCH PANEL: This patch panel enables quick, easy cable patching. Just plug Cat6 patch cables into its 12 front RJ45 ports, and use a 110 or Krone punch-down tool to terminate color-coded connections in the rear..
  • POWER OVER ETHERNET PLUS: This PoE+ patch panel maximizes performance with PoE+ applications. Power over Ethernet patch panel prevents spark-gap erosion that can affect transmission..
  • WALL MOUNTING: Durable aluminum panel with ABS plastic frame that mounts easily to wall or desk. Included cable ties and a removable cable management bracket help organize your connections..
  • WIRING STANDARDS: The N250-P12 supports EIA/TIA 568A and 568B wiring standards and is compatible with all network applications. This PoE+ patch panel is TAA-Compliant for GSA schedule purchases. Also known as: poe Ethernet patch panel / poe network panel / network patch panel / Cat6 patch panel / Cat 6 patch panel..
Check Stock

TRENDnet 12-Port Cat6 Unshielded Patch Panel, TC-P12C6V, Wall Mount, Included 89D Bracket, Vertical or Horizontal Installation, Compatible w/ Cat5e & Cat6 RJ45 Cabling, 110 IDC Type Terminal Blocks

  • 10-inch-wide patch panel is well suited for home and SMBapplications.
  • Color-coded labeling for T568A and T568B wiring schemes.
  • Included 89D wall mount bracket for vertical or horizontalinstallations.
  • Organize cable connections with included ties, and portlabeling.
  • 110 IDC type terminal blocks (use 110 or Krone type tool).
  • Use with TRENDnet TC-PDT Punch Down Tool (soldseparately).
  • Supports ANSI/EIA/TIA 568-B.2-1 and ISO/IEC 11801.
  • Operating temperature: -25° – 50° C (-13° – 122° F).
Check Stock

M-Tac Hook and Loop Tactical Morale Patches Board Molle Attachment 4.5 x 3.5 Coyote

  • MOLLE PATCH PANEL - the large patch panel made of high quality materials will perfectly fit your backpack to hold all your morale or funny patches....
  • MOLLE PATCH BOARD - hook and loop molle panel is equipped with a molle mount. Morale patch board has 3 fasteners on the back side of the platform,....
  • FLEX LOOP PANEL MOLLE - affordable tactical patch panel has the plastic base providing patches board with strength and durability, avoid deformation....
  • MORALE PATCH PANEL - having excellent peel, shear and tension strengths features, M-Tac panel with molle webbing is perfect for affixing hook-backed....
  • TACTICAL PATCH PANEL - on the front side, an M-Tac hook and loop panel is sewn onto the plastic base for attaching patches and ID-identifiers..
Check Stock