Top 2ton Bottle Jack

BAOSHISHAN 4 Ton Bottle Jack Double Ram 6-1/4\ to 15-3/8\ Lifting Range Hydraulic Jack Car Jack Portable with Carrying Case

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 4 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/8"..
  • [WITH CARRYING CASE] - The double ram bottle jack with case is easy enough to store away in the vehicle or garage. And the color of the compact box is random, BLACK or GRAY. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 4 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or ma....
Check Stock

BAOSHISHAN 3 Ton Double Ram Bottle Jack 6-1/2\ to 16-1/2\ Lifting Range Portable Hydraulic Jack with Carrying Case

  • [HIGH LIFT] - This high lift bottle jack have a double ram design with extension screw. The car jack fully extends up to 16.54" on the basis of constant capacity and volume. The double extending ram makes it easy to put the jack in place and it extends enough to easily raise the high clearance cars..
  • [DOUBLE RAM] - The double-ram design means you can get it into places where a traditional 2-4 ton jack would fit, but you have almost TWICE the lifting height since the second tube does not start extending until the first one reaches its maximum height. Combined with the extension screw, this fully extends to over 16 inches (about 10" of total lift)..
  • [WITH CARRYING CASE] - The bottle jack with case is easy enough to store away in the vehicle or garage. If the box you received is damaged, please do not hesitate to contact after-sales service to replace it. And the color of the compact box is random, BLACK or GRAY..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 3 ton jack to lift cars. It allows the hydraulic jack to be adjusted to accommodate desired work height. The diameter of the top is 0.8 inches..
  • [STURDY STRUCTURE] - Although the main bottle is only slightly larger than a 12oz soda can, and the overall weight is about 5.5 ....
Check Stock

BAOSHISHAN 6 Ton Double Ram Bottle Jack 6-1/4\ to 15-3/4\ Lifting Range Hydraulic Welded Bottle Jack Car Jack

  • [DOUBLE RAM] - The double-ram design plus extension screw top means you have 3 stages of lifting stroke, which has a better range of motion than a traditional single ram 6 ton bottle jack..
  • [BETTER RANGE OF MOTION] - The 6-1/4" starting height allows stubby bottle jack to fit most car clearance, and it has a double ram design with extension screw, which would fully extend up to 15-3/4"..
  • [SAFETY VAVLUE] - Each jack is tested for safety. The secure valve will automatically protect jack hydraulic system when overload. Equipped with a high-quality, glide-action pressure pump which is designed to lift with min effort..
  • [SCREW TOP] - Don't forget to screw the 2-3/8" tip up before using the 6 ton jack. It allows the hydraulic jack to be adjusted to accommodate desired work height while X-shaped top adds versatility. Thickened steel base increases stability and strength..
  • [PARAMETER] - Rated capacity: 6 ton (12,000 lbs) | Max height: 400mm/15.75" | Min height: 160mm/6.30" | Total lift: 9.45" | Adjustable height: 60mm/2.36" (extension screw top) | Net Weight: 4.9kg/10.8lbs.
  • [WARRANTY] - BAOSHISHAN provides ONE-year Warranty for the double ram jack. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-....
Check Stock

Hydraulic Welded Bottle Jack 50T(110,231lbs) Capacity for Auto Repair and House Lift, Red

  • ...resistance and high/low-temperature flexibility allowing it to operate at temperatures between -4°F and 113°F..
  • 【COMPACT AND PORTABLE】Its compact size is suitable for narrow and low working spaces, and can be easily carried in the trunk of a vehicle. In addition, the bottle jack has a handle that makes it easy to move and carry to any location. .
  • 【HIGH SAFETY】The bottle jack is equipped with a safety valve that can automatically protect the hydraulic system in case of overload to prevent damage to the jack. At the same time, the height-limiting device prevents over-pumping and gives you safety assurance. The bottle jack uses a rubber oil plug with a seal inside, which ensures a good seal against oil leakage..
Check Stock

BESTOOL Hydraulic Welded Bottle Jack, 20 Ton (40,000 lb) Capacity, Hydraulic Jack with Anti-Leakage Design Structure, Black

  • Bottle jack 20 ton engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks.
  • BESTOOL jack is tested for safety. Built-in oil-bypass and secure valve will automatically protect jack hydraulic system when overload.Keep Red bottle jacks from being damaged and keep you safe..
  • Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity.
  • Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 2-3/8".
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits,Car jack surface paint is oil-proof and anti-corrosion.Easy to clean.
  • Hydraulic bottle jack designed for residential and commercial use that can be widely used for sedans, suv, travel trailer, station wagon, mini bus.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
Check Stock

US JACK D-51126 20 Ton Bottle Jack Made In USA

  • OTC's 8-Ton Bottle Jack features a rugged forged cylinder and base to ensure strength and prevent leaks, along with a chromed pump piston and ram for additional rust resistance.
  • In-line design (pump mechanism centered on the cylinder) makes the jack much easier operate and manuever into position with the handle compared to offset designs.
  • Specifications include: 4-15/16 inch long stroke, 7-13/16 inch minimum retracted height, 15-3/4 inch maximum height with screw extension, 3 inch long screw extension.
  • 1-3/8 inch diameter saddle, 3-9/16 inch x 6 inch rectangular base.
  • OTC bottle jacks will provide years of reliable service, but eventally time and use will require new seals so every OTC bottle jack includes a free, life extending, seal kit.
Check Stock

VEVOR Pneumatic Bottle Jack 50T Hydraulic Car Jack Lift Range 27-43cm Air Transmission Jack 110231lbs for Heavy Duty Vehicles

  • 【HIGH LIFT CAPACITY: 50T】- The capacity can reach up to 50 Ton (110231lbs). More than that, hydraulic jack's lift height ranges from 10-1/2" to 17" (27cm-43cm). The highly rugged construction makes you worry nothing..
  • 【DURABLE & RELIABLE 】- The air tube made of high strength material and reinforced seal of the tube can ensure the safety and durability when you are at work..
  • 【AIR HYDRAULIC 2 IN 1 JACK】- Integrating pneumatic jack with hydraulic jack into this one car bottle jack, we found the adaptibility and practicability are beyond your imagination..
  • 【EASY TO TRANSPORT】- With two big wheels and a portable handle, the bottle jack is not a trouble when it comes to movement and and splicing handles also mean that the storage is easy..
  • 【WIDELY USED】- It is an ideal choice for automotive, heavy duty truck repair, moving machinery and heavy equipment and a variety of maintenance applications..
Check Stock

BAOSHISHAN Low Profile Bottle Jack 10 Ton Double Ram Jack 4-7/8’’ to 8-7/8’’ Lifting Range Hydraulic Jack Stubby Short Bottle Jack

  • [IDEAL FOR LOW GROUND CLEARANCE]- The 4-7/8" starting height allows shorty bottle jack to fit most low ground car clearance, and it has a double ram design. The car jacks fully extend up to 8-7/8" on the basis of constant capacity..
  • [STURDY STRUCTURE]- The compact bottle jack is designed with high-quality heavy duty alloy steel structure to ensure quality and durability. The pressure pump is designed to lift with minimal effort..
  • [APPLICATION]- Ideal for automotive and agriculture repair shops, loading docks, garages, warehouses, and factory floors. Also this is a heavy duty jack to help level heavy equipment..
  • [WARRANTY]- BAOSHISHAN provides a one-year warranty. If there is any oil leakage, damage or malfunction of the sturdy bottle jack, please do not hesitate to contact the after-sales service to replace it..
  • [PARAMETER]- Rated capacity: 10 ton (20,000 lbs) | Max height: 225mm/8.86" | Min height: 125mm/4.92" | Lifting height: 100mm/3.94" | Net Weight: 7.7kg/16.98lbs.
Check Stock

Knob for Bottle Jack Valve Release Screw On Harbor Freight Hydraulic Press Made of 6061 Aluminum (3/8\)

  • hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw.
  • It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip..
  • It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench).
  • This particular part is designed for the Harbor Freight Hydraulic Bottle Jack used in the 6, 12 & 20 ton arbor presses but will work on any bottle jack with a 3/8 and 7/18" diameter valve release screw having a.
  • DO NOT USE WHEN LIFTING VEHICLES: ONLY TO BE USED ON HYDRAULIC PRESS APPLICATIONS!.
Check Stock

YETI Rambler 12 oz. Colster Can Insulator for Standard Size Cans, Black

  • Fits 750 ml. wine or other beverage bottles. Fits 24 oz cans or pint bottles. Great collapsible beverage insulator for large cans of beer, Energy Drinks or large Iced Tea beverages..
  • Great to keep track of your beverage and add a bit of flair to a gathering. Wash the hugger in your washing machine. Design will not come off..
  • This wine bottle cover or wine hugger is sewn and printed in the United States by Caroline's Treasures..
  • Wine insulator or wine bottle insulator. make great hostess gifts, house warming gifts, or wedding gifts. These collapsible wine insulators are machine washable and dryable..
  • Jack Russell Terrier gifts, Jack Russell Terrier collectibles, Jack Russell Terrier Hugger Valentine's Day.
Check Stock

SWAG Off Road Electric Drive/Bottle Jack Kit For The Harbor Freight Tubing Roller

  • Converts your manual Harbor Freight Tubing Roller into an electrically powered roller with hydraulic downward pressure..
  • All material is laser cut out of 1/4" steel, springs, bottle jack clamp and detailed color instructions are provided..
  • This kit uses the Harbor freight electric pipe threader and the Harbor Freight 4 ton bottle jack..
Check Stock

BAOSHISHAN 4 Ton Bottle Jack 10-5/8\ to 24\ Lifting Range High Lift Double Ram Bottle Jack Hydraulic Bottle Jack Truck Jack Jeep Jack

  • ...RE] - Designed with high-quality alloy steel structure to ensure quality and durability. Inner/outer welded structure, longer service life and stronger overall structure. The pressure pump is designed to lift with minimal effort..
  • [ONE YEAR WARRANTY] - BAOSHISHAN take the responsibility of one year warranty for this bottle jack, professional and friendly after-sales team will help you solve the problems. If there is any oil leakage, damage or malfunction of the bottle jacks, please do not hesitate to contact the after-sales service to replace it..
  • [PARAMETERS] - Rated capacity: 4 ton (8,000 lbs) | Max height: 610mm/24.02" | Min height: 265mm/10.43" | Lifting height: 345mm/13.58" | Net Weight: 7.1kg/15.65lbs.
Check Stock