Top 3 5 Enclosure

StarTech.com eSATA Enclosure - for 3.5in SATA HDD - USB 3.0 / eSATA - Trayless - Metal - External Hard Drive Enclosure - HDD Enclosure

  • Easily connect and hot swap 3.5 in. SATA III hard drives, through eSATA or USB 3.0 with this trayless hard drive enclosure.
  • Access your files how you prefer with support for USB 3.0 and eSATA.
  • Simple set up with plug-and-play functionality.
  • With a sleek, metal design this hard drive enclosure is a perfect desktop companion for your Mac or PC.
  • Supports SATA I, II, and III (up to 6Gbps) / eSATA enclosure / Hard drive enclosure / External hard drive enclosure / HDD enclosure / 3.5 hard drive enclosure / SATA enclosure / USB 3.1 enclosure / 3.5 SATA hard drive enclosure / External HDD enclosure / SATA drive enclosure / External SATA enclosure / 3.5 external hard drive enclosure / Hot swap case / HDD case / Hard drive enclosure USB 3 / eSATA hard drive enclosure / SATA external hard drive enclosure / SATA to USB enclosure / 3.5 hard drive enclosure USB 3 / Removable hard drive enclosure.
Check Stock

BUD Industries JBH-4961-KO Steel NEMA 1 Sheet Metal Box 6 L x 10 W, Gray

  • 【Specifications】Product name: Electrical Box.
  • 【Product Size】Outer Size of enclosure box (Approx.): 5.91"x5.91"x3.54"(150mmx150mmx90mm)(L*W*H).
  • Inner Size of enclosure box(Approx.): 5.16" x 5.16" x 3.27"/131 x 131 x 83mm(L*W*H)- - (Allowable Error: ±2mm)..
  • 【Industrial Electrical Box】: electrical unit is not only weather resistant but also waterproof and does not allow dust to enter. You can drill holes inside depending upon your project requirement with no cracks and compromise.
  • 【Easy to operate】: electrical unit is easy to install, Hinged enclosure makes the opening and closing easier.
  • For the internal mounting, industrial enclosure features an mounting bosses,more convenient for your project..
  • 【Comprehensive Industrial Enclosure】: The junction box features two or three plastic latches for added security and locking. Moisture proof, sunscreen, anti-corrosion for safety from weather based environmental hazards.
Check Stock

ORICO 5 Bay Hard Drive Enclosure USB 3.0 to SATA 3.5 inch Enclosure Magnetic Tool-Free External HDD SSD Enclosure Storage Case Built-in Fan for Data Backup NAS Expansion Up to 80TB 5x16 - DS500U3

  • Tool-Free Installation -- The orico 3.5 hdd enclosure designed with magnetic chips on the cover, no screws and tools needed to helps you easily install the hard drives in 3 seconds to saving your time and improving your working efficiency..
  • Up to 80TB Large Capacity -- The usb hard drive enclosure can support all 3.5 inch SATA hard disks and up to 80TB for every single 16TB storage disk, convenient for enterprise data backup and exchange, also a good tools for the nas expansion..
  • Super-Speed Transmission -- Multi bay usb 3.0 hard drive enclosure, internal SATA, with 2.5 inch and 3.5 inch SATA HDD / SSD connect USB 3.0 high-speed, the 5 bay 3.5 sata hdd enclosure with the speed transmission reaches up to 5Gbps, about 20% faster than the traditional USB2.0..
  • Built-in double ball bearing fan -- A built-in 120mm double ball bearing fan which has good performance on high rotating speed and long service life, the 5 bay 3.5inch enclosure with design of large-area honeycomb holes in the rear panel can helps the heat dissipation..
  • Multi-protection -- Anti-over voltage, over-current, overheat, short-circuit, leakage and other multiple protection designs to ensure the security of data transmission of the usb3 external drive enclosure. Compatible with Supports Windo....
Check Stock

OWC Mercury Pro 5.25\ Optical Drive External Enclosure (NO Drive)

  • Enclosure kit for 5.25" Blu-ray, DVD, and CD Reader/Writers-Add Plug and Play CD, DVD, and/or Blu-ray disc burning to any USB equipped computer.
  • Supports 5.25" SATA I/II optical drives (all CD & DVD devices and Blu-ray drives 6.77 inches (17.2 cm)) and shorter.
  • High-Speed USB 3.0 Interface in a Sleek, Durable Aluminum Chassis.
  • External Enclosure ONLY, Optical Drive NOT included.
  • Includes: OWC Mercury Pro External Optical Enclosure, 0.6 meter (24") USB 3.0 (Standard-A to Standard-B), External power supply and power cable.
Check Stock

MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box Mono Block Amplifier and 8 Gauge Amplifier Amp Complete Wiring Installation Kit

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches.
Check Stock

Kicker 43CVR152 COMPVR 15" 1000W Car Subwoofer+Vented Box+Mono Amplifier+Amp Kit

  • Package Includes: (1) Kicker 15" Car Audio Subwoofer. (1) RockvilIe Single 15" Vented Car Sub Enclosure Box 3.51 Cu Ft. (1) RockvilIe RXD-M1 500 Watt CEA Compliant Rating Mono Class D Car Amplifier. (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's. 10 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 12 Feet of 14 AWG Blue Speaker Wire. 2 Spade Terminals. Features/Specifications:.
  • Kicker 43CVR152 15" 1000 Watt Dual Voice Coil 2-Ohm Car Audio Subwoofer. Power Handling: Peak :1000 watts. RMS :500 watts. Size :15". Injection molded SoloKon cone. Ribbed Santoprene Surround. Perimeter Venting. Spiralead tinsel-lead technology. UniPlate system redirects heat away from motor structure. Stamped Steel Basket. Spring-loaded Push Terminals. Dual 2-Ohm high-temperature voice coils. Top-mount depth : 8-3/16". Mounting Diameter : 13-11/16". Sensitivity : 89.2dB @ 1w/1m.
  • Frequency Response : 25-500Hz. Minimum Sealed Enclosure : 1.8 cu. ft. Maximum Sealed Enclosure : 5.2 cu. ft. Minimum Ported Enclosure : 3 cu. ft. Maximum Ported Enclosure : 5 cu. ft. Subwoofer Design : Round / Circle. Main Cone Color : Dark Gray. Woofer Composition : SoloKn. Woofer Surround : Santoprene Rubber. Weather....
Check Stock

MTX TNP212D2 12' 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block Amplifier, 8 Gauge Amplifier Amp Complete Wiring Installation Kit and Hi/Low Converter

  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack.
  • The enclosure designs delivers bass that exceeds expectation.
  • Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure).
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios.
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal.
  • Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control.
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt.
  • Single 4 ohm voice coils per sub (pre wired down to 2 ohm load).
  • Dimensions (HxWxD) : 13.875 x 29.625 x 1....
Check Stock

ORICO 5 Bay External Hard Drive Enclosure USB 3.0 3.5 inch Chia Support 80TB 5 x 16TB Aluminum Alloy HDD Enclosure with Fan / 150W Disk Data Storage No RAID -9558U3

  • 1.【Flexible Data Backup Storage Solution】: Are you worried lost your data? The 95 series is designed for small to medium businesses company, Video....
  • 2.【80TB Capacity and 5Gbps Transfer Speed】: 5 Bay External Hard Drive Enclosure, Compatible 3.5 inch SATA HDD hard drives, Supports up to 80TB....
  • 3. 【Dual-Core Chip and 150W Power Supply】: The HDD Enclosure Built-in SATA3.0 Dual-Core chip, provide Safety and Stability of Data storage and....
  • 4. 【Dissipates heat efficiently】: The USB 3.0 SATA Hard Drive Enclosure Features an Unibody Aluminum-Alloy Shell and Fan, good in heat....
  • 5. 【PLUG and PLAY, HOT SWAP】: Tool Free design mounts drives without tools and screws in seconds, hot-swapping supported, plug and play. The 3.5....
Check Stock

Yottamaster Aluminum 5 Bay USB3.1 Type C External Hard Drive Enclosure for 3.5 2.5 Inch SATA HDD SSD Support 5 x 16TB Mac Style Direct Attached Storage DAS - [PS500C3]

  • 【Reliable External Storage System for Individuals】This 5 bay hdd enclosure support up to 80TB external expanded storage. The front door adopt user-friendly PUSH Design for easy install and replacement of hard drives. It is an ideal choice for personal storage at home and office. It can support different drive type(s)-2,5"/3,5" HDD/SSDs, so you can take advantage of your hard drives' potential fully..
  • 【80TB Large Storage Capacity 】The 5 bay hard drive enclosure can house up to 5 hard drives, single disk support up to 16TB. Such Large capacity supported let you handle various work demands easily, like digital imaging, video production/editing, duplicating footage, create and manage archives..
  • 【80mm Silent Fan Inside】The 5 bay enclosure built with rugged heat-dissipating aluminum shell, front and rear with cooling holes, a 80mm silent fan inside can effectively accelerate air convection and rapid cooling. It is ideal for noise-sensitive environments..
  • 【For 2,5/3,5-inch Hard Drives】It comes with five removeable trays, allowing for easy installation and replacement of either the large desktop hard disk drives or the portable laptop drives and SSD's. Note: Spare trays are sold separately in a set of six trays, extra screws are provided, Get it....
Check Stock

StarTech.com 3.5" External Dual Hard Drive Enclosure Raid USB-C and USB-A SATA 6Gbps 2 Bay USB 3.1 SSD/HDD Enclosure (S352BU313R)

  • Create high performance external storage with a dual SATA HDD RAID array through USB 3.1 (10Gbps).
  • 2-Bay 3.5" HDD Enclosure with RAID support, including RAID 0, RAID 1, JBOD and SPAN (BIG).
  • 2-Bay hard drive enclosure supports SATA I/II/III (up to 6Gbps) and USB 3.1 Gen 2 (backward compatible with USB 3.0 / USB 2.0).
  • Dual 3.5" HDD/SSD/SSHD External Drive Enclosure provides high speed, high-capacity external data storage for your USB-C or USB-A laptop or computer (both USB-C and USB-A cables included).
  • Solid aluminum enclosure with metal hard-drive mounting tray and built-in fan to assist in heat dissipation / 2-drive 3.5" HDD/SSD RAID enclosure / 2-bay 3.5in enclosure / 2-bay 3.5" HDD RAID enclosure / 2-bay 3.5" SSD enclosure / Dual 3.5" HDD enclosure / Dual bay SATA enclosure / 2-bay 2.5" RAID enclosure.
Check Stock

Yottamaster Aluminum Alloy 5 Bay USB3.0 2.5 /3.5 External Hard Drive RAID Enclosure for 2.5/3.5 Inch SATA HDD Support 5 x 16TB & UASP,Ideal for Personal Storage at Home&Office- [PS500RU3]

  • 【Reliable External Storage System for Individuals】This 5 bay hdd enclosure support up to 80TB external expanded storage. The front door adopt....
  • 【Flexible RAID for Customized Work Need】It supports RAID 0/1/3/5/10/JBOD(SPAN)/CLONE RAID modes. You can optimize/simplify your workflow by....
  • 【80mm Silent Fan Inside】The 5 bay enclosure built with rugged heat-dissipating aluminum shell, front and rear with cooling holes, a 80mm silent....
  • 【For 2,5/3,5-inch Hard Drives】It comes with five removeable trays, allowing for easy installation and replacement of either the large desktop hard....
  • 【5Gbps Transfer Rate】This 5 bay hdd enclosure adopt USB3.0 protocol, transfer rate up to 5Gbps (MAX). Equipped with a versatile USB3.0 Type-B....
Check Stock

Xscorpion (WHT12 1/2" Wafer Head Tek Pointed Screw, (Box of 200)

  • DUAL VENTED 12 INCH SPEAKER ENCLOSURE BOX: The Bbox 12-inch double vented Pro Audio Tuned subwoofer enclosure is designed for optimum bass response and low-frequency reproduction which is ideal for lower profile sound quality subwoofers. Get the most out of your vehicle's subwoofer with car stuff designed for power and quality..
  • THE DESIGN: Our subwoofer box enclosures are built with a durable MDF that is 3/4" thick for solid frequency response and accurate music reproduction and we use a CNC Miter to ensure an airtight fit for your powered subwoofer. Our Dado design and construction offers a precision fit for our car subwoofer boxes & enclosures, which ensures a rattle and noise free environment..
  • SPECIAL FORMULA: We use Aliphatic wood glue on our 12" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 12 inch subwoofer box also gets a second application of glue around all internal joints after the final assembly..
  • HIGH QUALITY SOUND: We use quality materials like our special aliphatic resin wood glue and brad nails from a pneumatic nail gun to create a tight hold on the MDF parts during the glue drying process to ensure that our subwoofer boxes have an airtight no-leak, no-rattle air chamber improving the overall sound quality ....
Check Stock