Top 3 8 inch Chuck

uxcell Drill Chucks, 3/8-24UNF Threaded 1.5-10mm Capacity with Chuck Key for Electric Impact Corded Cordless Drill

  • [SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
  • [CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
  • [3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
  • [APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
  • [MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.
Check Stock

Festool 564535 CXS Compact Drill Set

  • 3 tools in 1, Fast Fix enables the use of the Centrotec chuck, a keyless chuck and a right angle attachment for gaining access to tight spaces.
  • Tough inside and out, the CXS features sophisticated electronics that protect the tool and batteries from overcurrent, under voltage, and overheating.
  • An ultra-compact design weighing in at less than 2lbs means maximum comfort during extended use.
  • Extremely long battery life and recharge time of only 30 minutes. Keyless Chuck Capacity - 1/32 - 3/8 inch.
  • Service All Inclusive - Three year warranty on drill, charger and batteries.
Check Stock

PNBO Lathe Chuck 2 Inch,2-Jaw Dedicated Pen Drilling Lathe Chuck,Wood Lathe Chuck

  • Product 1: Perfect for pens, bowls, cups, chess pieces, and other small workpieces.
  • Product 1: Fits workpieces up to 12 inches long and 8 inches wide.
  • Product 1: 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes.
  • Product 1: Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM.
  • Product 2: Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects.
  • Product 2: Internal jaws tighten around workpieces varying from 1.6 to 2.8 inches in size.
  • Product 2: External jaws spread inside of workpieces with pilot holes ranging from 2 to 3.2 inches.
  • Product 2: Included screw chuck provides even more options for supporting your projects.
Check Stock

findmall 17Pcs MT3 Shank ER40 Chuck Spring Collet Chuck Set with Collets 1/8 Inch-1 Inch Set and Box Fit for CNC Engraving Machine and Milling Lathe Tool

  • Product Material: Made of high quality alloy steel.
  • great processing and fine making compatible with durability and toughness..
  • Main Parameter: ER40 clamping range: 2-26mm.
  • Drawbar end thread: 3/8inch-16. Accuracy: 0.0005inch..
  • Collet Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1inch..
  • Wide Application: The brand new precision collet chuck holder for professionals and hobbyists demanding milling and drilling applications..
  • Package Contents: 1 x MT3 ER40 Collet Chuck.
Check Stock

LittleMachineShop.com HiTorque Deluxe Mini Mill with DRO (4190)

  • Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting.
  • 18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis.
  • Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more.
  • Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print.
  • Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

  • Spring Steel Design: High grade spring steel frame ensures better overall balance of tool holder assembly. Durable and long lasting. Polished body to be smooth and rust resistance. 6pcs CAT40 End Mill Holders Size: 1/4", 3/8",1/2", 5/8", 3/4", 1".
  • Both ER32 and ER16 Chuck Gage or projection length is 2.75".
  • 1pcs Precision Keyless Drill Chuck 1/2 Capacity..
  • Great Accuracy & Speed: CAT40 collet chuck accuracy in Tenth. Collet Set: T.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy. High concentricity. 6pcs CAT40 End Mill Holder in Projection Length: 2.5".
  • ER32 and ER16 Chuck Gage or projection length is 2.75". Collet Chuck of high speed is balanced to meet all industrial standard. Stable performance..
  • Multiple Collet Sizes: 12pcs ER32 collets set by 16th: 1/8".
  • 10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
  • Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for le....
Check Stock

Milton S-505 Analog Tire Inflator with Pressure Gauge, 15\ Hose Single Head Air Chuck, Made In USA 10-160 PSI

  • ACCURATE: Performance-tested and calibrated. Measures in pounds per square inch (PSI, 10-60, 2-lb. increments). Kilopascal readings also available per special order (kPa, 80-840, increments of 20)..
  • SINGLE HEAD CHUCK: Ideal for motorcycles and other hard-to-reach tire valves..
  • INFLATOR: Heavy-duty construction. Magnifying window lens. Full-swivel chuck. 15-inch hose. 3/8-24 threads..
  • REPLACEABLE PARTS: Gauge and valve cartridges can both be replaced. (Milton #507 and #512 for all 500 Series Milton window inflator gauges)..
  • OTHER #505 PARTS: Replacement hose whip/length = Milton #508.
Check Stock

HFS(R) Keyless 3/8in Drill Chuck - Universal Replacement fits most 3/8-in Drills with 24 UNF Thread Mount Shaft - Holds 1/32-3/8\ 0.8-10mm 1/32-3/8\ Bits

  • Application: This medium duty steel keyless drill chuck is a versatile product that fits almost every brand drill motor. Compatible with cordless and portable drills..
  • Features: 3/8in Drill Chuck Key-Less Hold and Turn to Tighten or Loosen Chuck.
  • Size: Chuck can tighten on drill bits from 1/32 inch to 3/8 inch (0.8mm - 10mm). Carbide jaw-inserts (for 10 mm. capacity) reduce bit slippage and enhance wear resistance.
  • Ergonomic and strong design with full metal sleeves in black oxide finish that eliminates the possibility of rust.
  • With through hole for clockwise and anticlockwise rotation.
Check Stock

WEN 4214T 12 in Variable Speed Drill Press & DPA2412T 24 in x 12 in Drill Press Table with an Adjustable Fence and Stop Block

  • Features a 5-amp induction motor, a 12-inch swing, and a 3-1/8-inch spindle travel.
  • Adjust the mechanical variable speed anywhere from 580 to 3200 RPM.
  • Digital speed readout displays current RPM of the machine for maximum precision.
  • Includes a Class IIIA 2.5mW laser, overhead light, adjustable depth stop, table roller extension, beveling 9-1/2 by 9-1/2-inch work table, 5/8-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth).
Check Stock

NEIKO 20754A 3/8” Drill Chuck Adapter | Chuck Drill for Impact Drivers with 1/4 Inch Quick Change Shank | Drill Converter Includes 1/2-Inch Adapter for Impact Guns | Hex to Chuck Drill Bit Adapter

  • TRANSFORMS IMPACT DRIVERS: This mini drill chuck is an easy way to adapt or convert cordless impact drivers, cordless power tools, and wrenches to do....
  • EASY ON AND OFF: Socket drive chuck adapter has a 3-jaw chuck securely holds round-shank drill bits and includes 1/2 inch adapter to quickly go from....
  • DRILL CHUCK EXTENSION: This chuck for your impact drill extends the reach of your impact drill or driver. Gives you the freedom of one-handed drilling....
  • HEX SHANK DRILL: Drill chuck for impact driver has a standard 1/4" hex drive chuck is an excellent fit to power tools and is constructed of Cr-V metal....
  • FITS A WIDE RANGE OF BITS: Hand drill adapter is the ideal capacity and clamping range for all drill bit sizes from 1/16” to 3/8” drill bits to....
Check Stock

Greenlee - Carbide Cttr Quick Chge 6Pc Hole Making 660

  • Ejector Spring on all sizes above 3/4-inch makes removal of slug easier. Minimum chuck size of 3/8 inch (9.5 mm).
  • Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking.
  • Precision carbide teeth for optimum performance and durability.
  • Includes 5 cutter heads, arbor, hex key and case.Dimensions 7/8 inch, 1-1/8 inch, 1-3/8 inch, 1-3/4 inch and 2 inch cutter heads.
Check Stock

TEXALAN Woodworking Drill Chuck with 2 Morse Taper Mount 5/8 INCH

  • [Installation]: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • [Packing]: Includes the 5/8 inch Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • [Application]: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
  • [Usage]: Tightens with a Chuck key for excellent grip. Removes easily with knock out bar.
Check Stock