Top 3 Channel Power Amplifier

KICKER 2 45L7R152 15 3600w L7R Car Subwoofers+Vented Box+Amplifier+Amp Kit

  • Package Includes: (2) Kicker 15" Car Subwoofers. (1) RockvilIe Dual 15 MDF Solo Baric L7/L5/L3 Vented Subwoofer/Car Sub Box. (1) RockvilIe dB16 8000 Watt/4000w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp. (1) RockvilIe RWK0CU 0 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC. 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal). 20 Feet of 14 AWG Blue Speaker Wire. 4 Spade Terminals. What's In The Box: (1) 15" Subwoofer.
  • (1) Owner's Manual. (2) Kicker Stickers. Features: KICKER 45L7R152 15" 1800 Watt L7R Car Subwoofer, Solo-Baric Sub 2-Ohm. RMS Power Handling: 900 Watts. Peak Power Handling: 1800 Watts. Dual Two-Ohm Voice Coil. Wrap Around Gasketing. Patented Ribbed Corners. Injection-Molded SoloKon Woofer. 360-Degree Back Bracing. UniPlate Back Plate And Pole Piece. Bumped Back Plate. Thick Tinsel Leads. Large Ceramic Magnet. Steel Basket With Spoke Design. Nickel Plated Speaker Terminals.
  • Sensitivity: 88.05 dB. Impedance: 2-Ohms. Mounting Depth: 8.38" inches. Mounting Diameter: 13.75" inches. Minimum Sealed Box Volume: 1.5 cubic feet. Maximum Sealed Box Volume: 3.0 cubic feet. Minimum Vented Box Volume: 3.0 cubic feet. Maximum Vented Box Volume: 6.0 cubic feet. Includes: Amplifier. Bass Re....
Check Stock

Rockville MS10LW 10" 2400w White Marine/Boat 10" LED Free Air Subwoofer Bundle with Rockville DBM12 2000w Mono Amplifier w/Covers+Bass Remote & Rockville RMWK4 Amplifier Install Wire Kit (3 Items)

  • Package Includes: (1)RockvilIe MS10LW 10" 2400 Watt White Marine/Boat 10" Free Air Subwoofer with LED. (1) RockvilIe DBM12 2000w 2 Ohm Marine/Boat Mono Amplifier Amp w/Covers+Bass Remote. (1)RockvilIe RMWK8 8 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. Features: RockvilIe MS10LW 10" Marine Free Air Subwoofer with LED (White). Free air subwoofer does not require any enclosure. Max Power: 2400 Watts. RMS Program Power: 1200 Watts. RMS Power: 600 Watts.
  • Polypropylene cone with Rubber edge. 2.0" 4 Layer dual voice coil. Molded ABS plastic basket made with a special blend that is waterproof and un-breakable (if you literally jump on it, it will not break or bend). Magnet 80 Oz double stacked magnet. Frequency response: 30Hz-4Khz. Impedance: Dual 4 ohms. Sensitivity: 90dB. Total diameter: 10.55". Cutout diameter: 9.0". Mounting depth: 5.6". Specifications: Free Air Resonance (Fs): 31.05 Hz. Electrical Q (Qes): 0.5577.
  • Mechanical Q (Qms): 2.3313. Total Speaker Q (Qts): 0.45. Equivalent Compliance (Vas): 1.676 cu ft / 47.4728 L. One-Way Linear Excursion (Xmax): 0.41 in / 10.5 mm. Reference Efficiency (No): 0.25%. Efficiency....
Check Stock

AIYIMA T10 Tube Preamplifier with Bluetooth and AIYIMA A07 TPA3255 Power Amplifier 300w+300W Class D Amp Bundle

  • The Aiyima T10 is a Vacuum Digital tube preamp for your home stereo system, The effect of the T10 vacuum tube preamp is warm and soft sound quality. Can match with our A07 Power Amplifier, it not only makes the sound sound soft and sweet, but also experiences the Hifi effect of the class D amplifier.
  • The T10 Tube preamp output to the powered speaker, A07 amplifier & passive speaker.
  • A07 Power Amplifier is a 2 Channel Power Amplifier,with 3.5mm AUX output to next active device can made a 2.1 channel audio system,the Max Power Output 300W+300W(Need choose big power adapter),Use TPA3255 Amp Chip.
  • More technical support and help,pls ask me:www.amazon.com/hz/help/contact/A3BG62S1F23IH5#.
Check Stock

AIYIMA DAC A2 Decoder with Bluetooth Support LDAC/aptX-HD and AIYIMA A07 TPA3255 Power Amplifier 300w+300W Class D Amp Bundle

  • Dac-A2 a DC5V Headphone Amplifier Destop DAC ,Built-in Hi-Fi Headphone amp chip can drive 16ohm to 200ohm headphones..
  • DAC A2 use professional Headphone amplifier Chipset TPA6120+OP275,DC 5V power input interface,RCA and 3.5mm headphones outputs. PC-USB:24Bit/96K,OPT/COA:24Bit/192kHz.
  • A07 Power Amplifier is a 2 Channel Power Amplifier,with 3.5mm AUX output to next active device can made a 2.1 channel audio system,the Max Power Output 300W+300W(Need choose big power adapter),Use TPA3255 Amp Chip.
  • More technical support and help,pls ask me:www.amazon.com/hz/help/contact/A3BG62S1F23IH5#.
Check Stock

Bluetooth Amplifier Board 25W+25W HF63 Dual Channel Audio Amplifier DC 10-25V Digital Amplifier Module with TDA7492P Chip

  • High Quality : The amplifier board adopts TDA7492P power amplifier chip, high quality electronic components and military grade PCB board, durable in use..
  • 2 Channel : This board is designed with dual channel output, 25W left channel and 25W right channel, high transmission rate and good sound quality..
  • Bluetooth Connection : The amplifier board is designed with Bluetooth V2.1 module and power supply reverse connection protection, convenient and safe to use..
  • Application : This digital amplifier board is suitable for upgrading and refitting the idle sound box and DIY production. It is suitable for speaker of 4Ω, 6Ω, 8Ω, 16Ω (8Ω is the best)..
Check Stock

4 Rockville WB65KLED 6.5\ 600w Metal Marine Wakeboard LED Tower Speakers+Amp+Mic

  • Package Includes: (2) Pair Rockville RKL65MBW 6.5" 700w Marine Boat Speakers w/LED+Black/White Grilles. (1) Rockville ATOM S20 Marine Bluetooth Amplifier 1600w 4 Channel/Volt Meter+PA Mic. (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit. (1) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin.
  • Features of RKL65MBW: Pair Rockville RKL65MBW 6.5” 2-Way 700 Watt Marine Boat Speakers with LED Lights. CEA Compliant Power Ratings. Power Rating: 350 Watts Peak /85 Watts RMS Per Speaker. Total Power: 700 Watts. Beat sync LED’s flash to the rhythm of the music. You can select either red or blue color LED’s on the wire harness. No extra installation for the LED. It gets a power signal through your speaker wire..
  • Features of ATOM S20: Rockville ATOM S20 1600 Watt Peak/440 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier With Bluetooth. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, RF faostgte etc). 2 Ohm: 110 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm: 70 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 220 Watts x 2 Channel 003c1% THD+N @ 14.4 Volts..
Check Stock

Hifonics ZG-3200.1D Zeus Gamma 3200 Watt Max Power Class D Monoblock Car Audio Amplifier

  • CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier.
  • PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms.
  • MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections.
  • EASILY TIE INTO YOUR SYSTEM: Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power.
Check Stock

Rockville SK510 PACKAGE 10 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts.
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings.
  • Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply.
  • Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable.
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • The RP-2000.1D is one of the most popular amplifiers ever released from Skar Audio and for good reason. Designed for maximum power, efficiency, and affordability, every feature of this amplifier exemplifies its high quality engineering. This amp is rated at a conservative 2,000 watts RMS power at a 1 ohm operating load, and is capable of putting out over 2,800 watts max power at 1 ohm..
  • Featuring a high speed MOSFET power supply, 4-way protection circuitry, advanced PCB board design, and other internal high quality components, the RP-2000.1D outperforms anything else in its class when it comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Powe....
Check Stock

Pyramid PB717X 1000 Watt MOSFET 2-Channel Car Audio Power Amplifier System with Soundstorm AKS8 8 Gauge Complete Car Audio RCA Wiring Installation Kit

  • PACKAGE INCLUDES: 1 Pyramid PB717X 1000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm AKS8 8 gauge complete car audio RCA wiring installation kit.
  • AMPLIFIER: The Pyramid amplifier features a 1000 watt max power, a 2 channel bridgeable amplification, a variable gain control, a MOSFET power supply, low level RCA inputs, a high level low impedance MOLEX input connector, LED indicators, and a automotive type fuse protection.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
  • DIMENSIONS: Dimensions: 9.84'' L X 10.03'' W X 1.96'' H.
  • WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check Stock

KICKER 43DSC69304 6x9 Inch 360 Watt Car Speakers (4 Pack), Boss R2504 1000 Watt 4 Channel Amplifier, and Soundstorm AKS8 8 Gauge Wiring

  • PACKAGE: 2 pairs of Kicker 6 x 9 inch 3 way car speakers.
  • SPEAKERS: a maximum power of 360 watts and an RMS power of 90 watts.
  • A drop in coaxial upgrade with the flexibility to fit nearly any vehicles doors for a vast improvement over factory sound.
  • AMPLIFIER: Boss Audio amplifier has a peak power at 2 ohms of 250 watts over 4 channels, and the channel separation is 90 dB, with RCA Inputs at 4 channels.
  • WIRING KIT: 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire and more.
  • SPECIFICATIONS: Speaker: Mounting depth: 3.25 inches, Mounting diameter: 5 5/8 inches, Weight: 8.9 lbs, Frequency: 30 20 kHz.
  • Amplifier: Dimensions: 10.71 x 10.43 x 2.07 inches, Weight: 7 pounds, Manufacturer warranty: 6-year warranty warrany.
Check Stock

Taramps 4 Channel Car Amplifier – Class D Multichannel Amplifier 1200 Watt RMS Car Electronics Car Audio Subwoofer 2 Ohm Stable Bass Boost Crossover for Car Speakers Sub Amp

  • Quality - This Class D 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class D 1200 Watt RMS Car Amplifier has a power rating distribution as followed 300x4 @2 Ohms, 192x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Crossovers- The Taramps Multichannel Car Amplifier offers you the ease of connectivity by providing the feature of crossover. The 2 channel car amplifier provides you with options of fixed 90Hz Highpass & Lowpass crossovers..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 9Hz-27KHZ, Bass Boost, SNR>88DB, Remote Bass Knob, 2-way protection, hi/low pass crossovers and 2 Ohm Stable.
  • Includes - (1) Taramps 1200W RMS 4 Channel Class D Amplifier.
Check Stock