Top 3 Inch Exhaust

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

UPOWER 3" Inlet&Outlet Exhaust Resonator,9" Overall Length Center Straight Through Stainless Steel Muffler,Polished

  • SIZE: Inlet: 3" inner diameter - Outlet: 3" inner diameter - Overall Length: 9" - Body length: 6.5" - Body type: 4" round performance resonator - style: Both ends can be inlet, no inlet or outlet difference. Please measure your exhaust pipe’s dimension before purchasing this 3 inch muffler..
  • FIT: 3 inch inlet & outlet exhaust center straight through muffler, universal fit for all 3 inch exhaust pipe. Muffler and exhaust pipe are considered matched as long as they can be welded together seamlessly..
  • PERFORMANCE: The 3 inch inlet resonator muffler is made of high quality stainless steel and used CRF (Continuous Roving Fiberglass) technology, which can absorbs unwanted interior resonance and produces a low, deep tone. Brushed finish for good looking..
  • INSTALLATION: 100% welded design performance resonator for long-lasting durability. Installation instructions are not included, professional installation is highly recommend..
  • WARRANTY: Upower provides 90-days warranty for each resonator muffler. Before purchasing, please make sure the Brand Logo is "U....
Check Stock

VQL Universal Burnt Tip Muffler, 2 inch Inlet Muffler Exhaust, 2Inch Inlet 3Inch Outlet Blue Burnt Exhaust Muffler, Import Muffler Stainless Steel Exhaust Burnt Tip 14.8Inch Length

  • ◆【Widely Use--2 Inch Inlet Muffler】 This is a exhaust muffler, universal fits any 2'' inlet trucks car exhaust tail pipe. muffler suitable for most cars, trucks, cars, etc. with 2-inch air intake and 3-inch air outlet..
  • ◆【Premium Quality - Burnt Muffler】 The import muffler is made of stainless steel and is durable,Straight-through muffler design reduces back pressure while absorbing sound waves, Better air flow design, Improves exhaust velocity performance..
  • ◆【Function and Decorate】 Burnt muffler tailpipe exhaust can not only prevent the deformation of the car exhaust pipe, but also play the role of supercharging and turbulence.The 2'' Inlet 3'' Outlet exhaust muffler is made of high-quality materials helps absorbing sound and producing a low,deep tone.Burnt muffler has a burnt blue tip that adds an aesthetic focal point to the rear of the vehicle, make your vehicle look cooler,Your car will definitely stand out from the crowd..
  • ◆【Size and Material】 2'' inlet, 3'' outlet, 14.8'' length. exhaust tip Pipe built with mirror polished stainless steel & blue plating, blue burnt exhaust tip. Please Measure the size of your Tail Pipe Before purchase..
  • ◆【Lifetime Warranty】 Package Included: 1 x Blue Burnt Exhaust Muffler All our prod....
Check Stock

SPELAB Electric Exhaust Cutout Valve 3.0 Inch 76mm Catback Single Y Pipe with One Controller Remote Kit…

  • One-Touch Loudness: 3.0 Inch Electric Exhaust Cutout Valve Kit fit for all types of vehicles. Note: please make sure you have enough space to install before purchase and make sure your exhaust size is 3.0 inch. Professional Installation is highly recommended. 3.0” Cut-out valve Kit included: 1 x 3.0” exhaust pipe cutout valve with motor, 1 x extension harness (Length: 3.5M), 1 x wireless remote control (without battery), and 1 x control box with cigarette lighter plug..
  • Function: This Cut Out Valve System Kit is specifically designed for single exhaust pipe and made to enhance the performance and power of your vehicle by remotely controlling of cutout valve. The faster the exhaust could be pushed out of the engine, the faster the combustion process could start over which give more horsepower. Aggressive deep sound while ensures smooth exhaust gas flow. SPELAB Butt Joint Exhaust Band Clamp is recommended for installation..
  • Cutout Valve: High-quality chrome-plated steel butterfly plate and valve pipe wall thickening process. You can turn on and off from the inside of the car by remote control. Turn off the switch, keep your original, peaceful exhaust system for comfortable. Turn on the switch, you can get aggressive deep sound. The opening angle of t....
Check Stock

EVIL ENERGY Exhaust Hanger Rubber Insulator Bushing Mount 2 Holes 2Pcs

  • Universal: The exhaust hanger is suitable for most cars, please check the size of the your application before purchasing..
  • Size: 2.88inch×1.85inch×0.82inch. Hole Diameter:0.44inch. Hole Center Distance: 1.49inch. Temperature Range: -4℉ to 248℉..
  • Function: High density rubber muffler hanger helps fix the exhaust pipe position to reduce vibration and noise.Prevent exhaust pipe from scraping along the ground..
  • Warranty: EVIL ENERGY provides a 3-month warranty for the exhaust hanger. If you have any questions, please feel free to contact us via Amazon..
Check Stock

EVIL ENERGY 2.75 ID to 3 OD Exhaust Pipe Reducer Adapter 304 Stainless Steel Universal

  • Size: Small Diameter: 2.75" (2 3/4inch) ID/69.85mm (Fits over 2.75" OD Pipe). Large Diameter: 3" OD/76.20mm (Fits inside 3" ID Component). Length may....
  • Fitment: Universal fit for all exhaust / turbo / intercooler / intake piping connection. Welding is recommended..
  • Category: Pipe to Component (Use when your pipe is smaller than your component).
  • Material: 304 stainless steel. Package: 1PC 2.75 inch ID to 3 inch OD exhaust reducer..
  • EVIL ENERGY provides 3-month warranty for this exhaust pipe adapter reducer. Professional installation is highly recommended. Any problem you have,....
Check Stock

Upower 2 inch Inlet Exhaust Tip Burnt Muffler 3 inch Outlet, 2' to 3' 14.6' Length Exhaust Tip Universal For Car Truck

  • Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.6 inch, Exhaust Muffler body width 4 inch.
  • 2 in 1 Design: This is a 2 inch muffler resonator with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
  • High Quality Material: Upower exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made by premium cotton helps absorbing sound and producing a low, deep tone, durable and Anti-corrosive, never Rusty.
  • Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe..
  • Note: 1 Year Warranty, No instruction is included. Professional installation is highly recommended..
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Dynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool

  • Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
  • 3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
  • Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
  • Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
  • 3-inch Diameter, 7 Degrees Offset, 5 Hip.
  • Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.
Check Stock

4 Pcs Exhaust Hanger Mount Rubber Bushing Insulator Grommet Hanger Bushing Support For Tail Pipe Exhaust System Shock Absorbent Support Bracket Donut

  • Installation steps: 1 Cutting off the rubber from the exhaust Insulator. 2 Use a wire brush to remove dirt & remnant rubber from the hangers. 3 Apply silicone Lube to the retaining ends of the exhaust hangers. 4 Install the new rubber mount.
  • Position: Between the exhaust pipe bracket, muffler, and the chassis hanger. Installed in the hanging exhausts back boxes and exhaust mount.
  • Constructed from durable and robust EPDM rubber material for long life.
  • Package Including 4 pieces rubber exhaust hangers.
Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

  • [Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
  • [Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
  • Insert pipe spread tool into pipe, connect to existing drill, and expand.
  • Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
  • [Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
  • Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
  • [Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
  • [Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.
Check Stock