Top 3 Inch Hose

Hose Clamp, Stainless Steel Hose Clamps for 1 Inch to 2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line, Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch, 1/2 inch, 3/8 inch, 5/8 inch, 1 inch, 2 inch, 1-3/5inch, 2-1/2 inch. Stainless steel clamps with various size can meet your different clamping requirements..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applic....
Check Stock

WINL Stainless Steel Hose Clamps - 16 Pack Worm Gear Drive Hose Clamps SAE 16 Clamping Range 3/4 Inch to 1-1/2 Inch (19mm-38mm) for Automotive Plumbing, 3/4'', 1'', 1 1/4'' Hose Clamps

  • ...t, anti-rust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL stainless steel hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The SAE size #16 hose clamps have clamping range from 3/4 inch to 1-1/2 inch (from 19mm to 38mm), great for hose or pipes within this range, perfect as 3/4 inch hose clamps,7/8 inch hose clamps,1 inch hose clamps,1 1/5 inch hose clamps, 1 1/4 inch hose clamps etc. . The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • Effortless Installation: WINL size 16 hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
  • Wide Applications: WINL stainless steel hose clamps are perfectly suitable for home, automobile, industrial, gardening, mechanical, electronic, boat, marine and more. The hose clamps are perfect for seal hoses, water pipes, plumbing, pipes, fittings, cables, tubes, fuel lines, cars, tr....
Check Stock

Vacuum Attachment Adapter Kit- Vacuum Hose Adapter - Pool Supply 1-1/4" or 1-1/2" Hose Connector - Hose Reducer Adapter - Reducer from 35mm/38mm/42mm to 32mm - from 1 3/8 inch to 1 1/4 inch

  • ...ou more options for your vacuum cleaner. Please consider diameter of adapters and check the inner/outer diameter of your vacuum hose before ordering to make sure these adapters can fit with your vacuum hose..
  • 35mm to 32mm Converter: You want to have more options with 1 1/4 inch vacuum attachments for your vacuum cleaner but the outer diameter of your vacuum hose is 1 3/8 inch, they did not fit. The smallest adapter in this vacuum adapter kit can help you resolve this case, it can convert from 1 3/8 inch to 1 1/4 inch..
  • Vacext's pool hose adapter (convert 1 1/2 inch to 1 1/4inch): This adapter can use to connect an automatic pool cleaner to an Intex brand pool.
  • This adapter also can use to connect vacuum cleaner to 32mm/35mm vacuum attachments. It converts from 1 1/4inch to 1 1/4 inch.
  • Please check inner diameter of your vacuum hose before ordering..
  • Adapter for Power Tools: This adapter is a bridge between your vacuum and power tools! Adapter with 5 layers is compatible with many vac hoses. Y....
Check Stock

MyLifeUNIT Washing Machine Drain Hose Extension Kit, Universal Fit All Drain Hose, 6-Foot

  • Universal Fit All Drain Hose, Formed Outlet End Fits 1-1/4Inch, 1-1/3-Inch, 1-1/2-Inch and 1-2/3-Inch.
  • A Durable, Super Flexible Hose, Heavy-duty Plastic for Durability.
  • Ideal for Pedestal Pump Discharge, Works with Submersible Sump Pumps.
  • Length: 6-Ft, Washing Machine Drain Hose Extension Kit.
  • Package Content : 1 x Washing Machine Drain Hose,1 x Hose Clamp.
Check Stock

Eastman 41025 Stainless Steel Steam Dryer Installation Kit, 6 Ft Length, Silver

  • DIMENSIONS: Hose measures 6 Ft with the 90-degree elbow to allow closer installation to a wall.
  • 72-inch X 3/4-inch FHT X 3/4-inch FHT fill hose.
  • BUILT FOR PRESSURE: The design of this high-pressure stainless steel hose prevents it from kinking and crimping.
  • (1) 6 ft fill hose with 3/4″ FHT connection and a 90-degree elbow, (1) 1 ft hookup hose with 3/4″ FHT connections, and (1) Y Adapter.
  • LONG-LASTING: This hose features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior to withstand high-pressure and full-flow.
  • UNIVERSAL: This kit comes with all the necessary components to install your steam dryer to the water supply.
Check Stock

LDR Industries 530 2050 Aerator, One Pack, Silver

  • Faucet to hose aerator adaptor allows connection to standard 3/4-inch male hose thread.
  • Converts standard male (15/16-inch x 27 thread) or female (55/64-inch x 27 thread) aerator to 3/4-inch male hose thread or 15/16-inch x 27 male thread.
  • Lead free compliant - meets ca's Ab1953 and vt's 18 vsa low lead laws.
  • For faucets that use a less common thread will require an additional adapter..
Check Stock

Vent Systems 4\ inch Air Vent Duct Connector Flange Straight Ventilation Pipe Plastic Ducting Connector Plate For Cooling Heating Ventilation System HVAC 4\ inch - Pack of (1)

  • 3 INCH FLEXIBLE DUCTING - Our 3 inch boat blower hose is made of Aluminum and PVC Thermoplastic. 3inch diameter and 16.5 feet total length. Come with 2 pack stainless steel clamps..
  • DESIGNED for VENTILATION APPLICATIONS - The 3 inch flexible hose is designed aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents.
  • 4-LAYER DEISGN: Our 3 inch vent hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts black dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage.
  • EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - The aluminum 3 inch dryer vent hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze.
  • WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other install....
Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

  • 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
  • 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
  • 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
  • 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
  • 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
Check Stock

3Inch Flexible Ducting Hose 16.5 feet Black Aluminum Ducting Dryer Vent Hose with 2 Screw Clamps for Heating Ventilation Air Conditioning (HVAC), Boat Blower, Exhaust Grow Tents

  • 3 INCH FLEXIBLE DUCTING - Our 3 inch boat blower hose is made of Aluminum and PVC Thermoplastic. 3inch diameter and 16.5 feet total length. Come with 2 pack stainless steel clamps..
  • DESIGNED for VENTILATION APPLICATIONS - The 3 inch flexible hose is designed aluminum and PVC thermoplastic constructed flexible ventilation ducting according to your HVAC, dryer, grow rooms or tents.
  • 4-LAYER DEISGN: Our 3 inch vent hose features four-layer protection, making it more durable and resistant to leaks than single-layer designs. The internal layer is made of heavy-duty dual aluminum foil that is fire/flame resistant, the outer layer adopts black dual PVC thermoplastic that protects the aluminum from cuts and tears while preventing leakage.
  • EASY INSTALL & CUSTOMIZE YOUR USE LENGTH - The aluminum 3 inch dryer vent hose could be easily cut by wire cutters, and cut any length according to your needs. Two 3-inch clamps make the installation a breeze.
  • WIDELY APPLICATIONS - The 3 flexible duct usually be used in heating, ventilation, and air conditioning (HVAC) system to deliver and remove air. Plays an important role in delivering and removing air in hydroponic grow rooms and tents, inline fans, bathrooms and attics, heating and cooling transportation, and other install....
Check Stock

Winlong Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing 1/4 Hose Clamps 1/2 Hose Clamps

  • ...nti-corrosion, water proof and oil proof.
  • Winlong hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: Winlong size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: Winlong hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. Winlong worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
  • Wide Applications: Winlong stainless steel hose clamps are perfectly suitable for home, automobile, industrial, gardening, mechanical, electronic, boat, marine and more. The hose clamps are perfect for seal hoses, water pipes, plumbing, pipes, fittings, cables, tubes, fuel lines, cars, trucks, SUV.
Check Stock

WINL Stainless Steel Hose Clamps - 24 Pack Worm Gear Drive Hose Clamps Micro Size 4 Clamping Range 1/4 Inch to 5/8 Inch 6mm-16mm for Automotive Plumbing,1/4 Inch Hose Clamps 1/2 Inch Hose Clamps

  • ...ust, anti-corrosion, water proof and oil proof.
  • WINL hose clamps are reliable, strong, reusable and durable..
  • Remarkable Performance: WINL size 4 stainless steel 6-16mm hose clamps are high torque, easy to install, adjustable range, secure hold and smoothly drive. The size #4 hose clamps have clamping range from 1/4 inch to 5/8 inch (from 6mm to 16mm), great for hose or pipes within this range, perfect as 1/4 inch hose clamps, 3/8 inch hose clamps, 7/16 inch hose clamps, 1/2 inch hose clamps etc. The average torque of the hose clamps is 3.9N, much higher than the standard torque 2.26N..
  • Effortless Installation: WINL hose clamps are designed with through-hole process, even slotted holes, steel belt through hole, tight locking and strong torsion force. The stainless steel hose clamps have stronger tightening force and and easy to install. WINL worm gear hose clamps are beautiful shape, precision polishing with smooth surface without burrs..
  • Wide Applications: WINL stainless steel hose clamps are perfectly suitable for home, automobile, industrial, gardening, mechanical, electronic, boat, marine and more. The hose clamps are perfect for seal hoses, water pipes, plumbing, pipes, fittings, cables, tubes, fuel lines, cars, trucks, SUV.
Check Stock

Fuel Transfer Hose 3/4 Inch Fuel Hose 20 Feet,Farm Fuel Transfer Hose with Fittings,for transferring Diesel, Kerosene & Gasoline - Fuel Tank Hose for Fuel Transfer Pumps by BOOTOP PIN

  • 3/4 Inch NPT x 20 Feet Anti-Static Replacement Fuel Hose for Fuel Transfer Pumps For Dispensing Diesel, Kerosene & Gasoline.3/4 Fuel Transfer Hose With End connections..
  • Fuel transfer pump hose Designed for use with all electric pumps..
  • This Transfer tank hose include a 3/4 Inch NPT End connection and a 1 inch NPT threaded fitting at the other end..
  • 3/4 Fuel hose, 1 diesel fuel hose, gasoline pump hose, gas tank hose,Suitable for all Fuel Transfer Pumps for FPM-12, FPM-24, FPM-115 & FPM-220 models..
  • Feel free to contact us if you have any problems. If you are not satisfied with our products,we accept all of the return,replacement or refund requests..
Check Stock