Top 3 Piece Rivets

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

80 Pieces 3/16' x 1' Large Flange Aluminum Rivets for Metal, Blind Fasteners (Silver)

  • Large Flange Rivets: Add this pack of rivets to your tool kit for advanced preparation.
  • use them to hang signs, nameplates and more.
  • use them while metal and woodworking for a sturdier hold.
  • Convenient: Use the pop rivets in place of screws or nails when attaching hinges.
  • they are perfect for hanging items when one side of the wall is inaccessible.
  • High Quality: The 3/16 rivets are made of a sturdy, long-lasting aluminum and iron material.
  • the mandrel is made of iron and won’t break off prematurely.
  • Pop Rivets 3/16: The rivets measure 3/16" x 1".
  • when installed correctly the rivets will not damage any surfaces due to corrosion.
  • What's Included: The pack includes 80 rivets for metal, roofing, walls, and woodwork.
Check Stock

Micro Trader 100pcs 80.31inch Silver Double Cap Tubular Rivets Metal Tool Set Leather Crafts Stud

  • Double Cap Rivets are used for Fastening Leather and Garment Material Together..
  • Double Cap Rivets will give you a nice Finished look on both sides of your Leather Piece..
  • These rivets are widely used in clothing, leather craft, paper craft etc.Work in DIY..
  • It measures with smoothly-designed round double caps to ensure both ends are covered in style..
  • They may be small but these multi-coloured rivets will surely stand out on your hand-made crafts!.
Check Stock

Yinpecly 0.24\x 0.71\(D x H) Aluminum Flat Head Semi Tubular Rivets for Fasten Work Pieces Silver Tone 50pcs

  • Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched..
  • Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole.
  • Rivets can also be used with a rivet cap to improve appearance of clinched end..
  • Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward..
Check Stock

5/32\ x 1/4\ (DF11-8-ST) Steel Semi-Tubular Rivet with a 5/16\ Diameter Oval Head - Zinc Finish (Pack of 100)

  • Semi-tubular rivets can be employed for multiple applications, such as luggage, brakes, and 3 ring binders.
  • Excellent fasteners to quickly and inexpensively join work-piece materials together.
  • Low cost installation tools available - Part number: HT-178.
  • These rivets are a low-profile professional fastener and are less visible than screws..
Check Stock

Pop Rivet Gun, JiGiU 1\\/4 Rivet Gun Kit with Collection Bottle Include 200pcs Rivets Heavy Duty Hand Riveter Riveting Tool, 5 Interchangeable Heads for Metal, Wood, Plastic and Automotive

  • 【TWO HAND RIVETS GUN】Our Rivet Gun Set Comes with 5 Different Nozzles(2.4mm, 3.2mm, 4.0mm, 4.8mm, 6.4mm) to Work with Those Rivets ,And for The Convenience of Use, We Also Equipped with 200pcs Rivets.
  • 【5 SIZES REPLACe NOZZLE 】Adjustable Rivets Gun Include 5 in 1 Nozzle Head for Quick Easy Change Among Rivet Sizes from 2.4mm -4.8mm (Notice:6.4mm Aluminum Nail is The Largest Size It Can Handle)..
  • 【LABOUR-SAVING DESIGN】The Manual Rivet Gun with Two-Handle Design is Ergonomic, with a Soft Handle, Which is More Efficient and Labor-Saving Than a Single-Hand Rivet Gun.
  • 【COLLECTING BOTTLE& ASSEMBLE NOZZLE】 Rivet Gun Integrated Rivet Pin Catcher and Collecting Bottle Ensure you Safe,and Easy to Handle..
  • 【200 PCS RIVETS PACKAGE】Not Only Hand Rivet Gun Kit with 5 Nozzles,Include the 50 PCS 3/32 inch x 1/4 inch rivets 50 PCS 1/8 inch x 1/4 inch rivets 50PCS 5/32 inch x 1/4 inch rivets 30 PCS 3/16 inch x 1/4 inch rivets 20 PCS 1/4 inch x 1/4 inch rivets.
Check Stock

FagusHome 12 Boxes Nail Studs Gold Metal Nail Studs Rose Mix Shapes Nail Art Charms Accessories Multiple Shapes Rivet Jewelry Decoration Kit with 2 Pcs Tweezers

  • 【Value Kit】Nail art rhinestones nail art rivets in 5 boxes, the kit contains 12-Color Mixed Tip Diamonds, Star & Moon Nail Art Studs Rivets, Golden Metal Hollow Nail Art Studs Rivets, Gold & Silver Shaped Studs Rivets, Colorful Flat Bottom Acrylic Nail Art Diamonds, 1pcs curved tweezers and 1pcs wax pen, provide a great value nail art set for you..
  • 【Variety Choices】Always a way to make your heart and feel free to match your fingertips. Nail art rhinestones contains a wide variety of styles, colors and sizes, nail art rivets contains lots of different shapes, such as stars, moon, heart, circle, flower, square, semicircle, triangle, cross, etc. Enrich your vision..
  • 【Simple to Use】The bottom of 12-Color Mixed Tip Diamonds is pointed, but they can be fixed on the nail surface, so please don't worry about them being unusable. After the bottom color brush is finished, take a little bit of glue to stick to the position where you want to stick the drill, then take 3 the same size of the bottom to drill into the pile, 3 tips to the tip, adjust the position and then illuminate After the lamp is finished, then get stuck drill glue to fill it in the gap positio.
  • 【Infinite Imagination】Mixed nail art diamonds, embellished with fingertips. Every r....
Check Stock

200 Pcs M4 x 6mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone

  • Rivets can also be used with a rivet cap to improve appearance of clinched end..
  • Long length rivets can be applied without buckling or bending the rivet shank..
  • Can be used to fasten similar or different materials of multiple work-pieces..
  • Tubular-hole rivets often used to pierce and clinch materials without a pre-drilled or punched work-piece hole..
  • Inexpensive alternative to threaded fasteners, permanent fastener with good joint strength..
Check Stock

Weaver Leather Heritage Rivet and Burr Setter, #12

  • [Unbelievable! 40 Set Solid Copper Rivets and Burrs for Leather] Totally 40 rivets and burrs set: 15 x copper rivets and burrs(11mm x 4mm x 19 mm), 15 x copper rivets and burrs(11mm x 4mm x 14.5 mm), 10 x copper rivets and burrs(10mm x 3.4mm x 19 mm), 1 x 2 IN 1 rivet and burr setter is used for both size 9 and size 12 burrs rivet. 2 x leather hole punch cutters(Dia. 3.5mm and Dia. 4mm)..
  • [Stunning Size 9 and Size 12 Copper Rivet Fastener Install Setting Tool and Extra Dia. 3.5mm and Dia. 4mm Precision Round Leather Hole Punch] 2 IN 1 Stainless steel heavy duty setter, one tool can install the rivets in No. 9 Size, No. 12 Size. Bigger convenient and higher efficient. Size: 4.7"x 0.79" x 0.43"(L x W x H).
  • 2Pcs Heavy-duty permanent round hollow hole punch cutters, quenching treatment, more rigid and durable..
  • [In Less Than Few Mintues, Make A Nice Finished Rivet, Enjoyed The Happiness Brought By Leather Craftsmanship] Whether you are a hobbyist of leather crafts or a professional, it is worth having the copper rivets kit, which is EASY to operate and QUICK to install. Don't worry about installation failure..
  • [More Quantity & It Is Far More Cost-effective, 40 Set, 2 Lengths, 2 Sizes Copper Rivets for Leather] 40 x Rivet and burr set, more quantity tha....
Check Stock

Mardatt 240 Pcs 5 Sizes All Aluminum Large Flange Blind Rivets Set Round Dome Open Head Blinds Pop Rivets Assortment Kit with Storage Case for Joining Metal Plate Pipe Automotive

  • 【What you Get】The blind rivets assortment kit contains 50 pcs 3/16" x13/32’’(4.8x10 mm) pop rivets, 50 pcs 3/16" x 1/2"( 4.8 x 12mm) pop rivets, 50 pcs 3/16” x 5/8” (4.8x16mm) pop rivets, 50 pcs 3/16" x 3/4" (4.8x20mm) pop rivets, 40 pcs 3/16" x 1" (4.8x25mm) pop rivets, totally 240 pcs. All are packed by sizes in a sturdy storage container for easy, convenient, hassle-free storage. Pls refer to the picture for more size detail..
  • 【Quality Aluminum】 Blind rivets have high-quality aluminum body and steel mandrel, corrosion resistant, durable and easy to assembly. They are strong, smooth without burr yet lightweight, and will last for years..
  • 【Easy To Install】 If you want to join metals that are difficult to weld then blind rivets are what you need. Simply drill a suitable hole and insert the blind rivet head into it, use rivet gun to pull the mandrel through. Then, you can lock the rivet in place and get a strong fastening..
  • 【Provide A Strong Grip】 Sturdy, corrosion resistant and long lasting! They work well on various projects. The tubular body is smooth and neat for firm grip effect.
  • the thick flange structure prevent stripping effectively..
  • 【Multipurpose Fastener】They are commonly used in industrial riveting applications: con....
Check Stock

ISPINNER 325pcs Backup Rivet Washers Assortment Kit Stainless Steel Washers for Blind Pop Rivets Diameter 3/32 1/8 5/32 3/16 1/4

  • ✅【HIGH QUALITY】 These rivet washers are made of high quality 304 Stainless Steel, corrosion resistant, durable and steady, high quality materials and construction to ensure long service life..
  • ✅【SPECIAL DESIGN】Backup Rivet Washers are designed to be used with blind rivets, to provide additional support when tighening rivets in soft materials and other applications where it needs a larger diameter surface to prevent pulling out. They're perfect to deal with oversized or irregularly shaped holes..
  • ✅【WHAT YOU GET】This assortment kit has 5 different sizes for you to deal with different rivets. It includes 1/4"(25pcs), 3/16"(100pcs), 5/32"(50pcs), 1/8"(100pcs), 3/32"(50pcs), which almost contain the 5 most commonly used sizes in our lives. Comes with a convenient plastic case, which makes it easy to find correct washers quickly..
  • ✅【HOW TO USE】Choose the right size rivet washers according to your pop rivets diameter. For example, if your blind rivets size is 3/16" x 1/2", you can use a 3/16" washer. Slide the washer onto the blind rivets flange, insert the rivets into the pre-drilled holes and use rivet tools to get it fixed..
  • ✅【WIDE APPLICATION】These washers are suitable for indoor decoration, outdoor construction, electrica....
Check Stock

Tubular ROLL Squeezer DIE for 3/16' Body Diameter Rivets, 3/8' Height.187 Shank Diameter.437 Shank Length

  • SOLID ALUMINUM RIVETS UP TO 1/8" IN DIAMETER..
  • TUBULAR MILD STEEL RIVETS UP TO 3/16" DIAMETER..
  • ADJUSTABLE TO FIT FROM 1/16" TO 1-3/4"IN LENGTH RIVETS, BY CHANGING DIE SIZE, (SOLD SEPERATELY)..
Check Stock