Top 3 axis Cnc Machine

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Daedalus 3018 CNC Upgrade Kit, for X-Axis Upgrade & Y-Axis Extension

  • Extend your 3018 CNC Y-axis from 290 mm to 450 mm, get a 320*450mm Basic Area, 320*370mm Movement Area, 300*320 Actual Stroke..
  • Upgrade your 3018 CNC X-axis with a aluminium knob, save your hand from gettting dirty when trying to turn the screw by hand. Pls kindly to know that it DOES-NOT extend the X axis..
  • Compatible with most 3018 Pro series CNCs, 3018 Pro, 3018 Pro Max, etc. And pls note that your 3018 CNC should be equipped with ∅8 mm T8 lead screw, ∅10 mm guide rail, and no counterbore on the End Plates for Rails..
  • Easy to Assembly. And great value to upgrade your 3018 CNC and get a bigger one..
  • Longer limit switch cable for the Y axis is required. The original limit switching cable may not be long enough..
Check Stock

CNC 3018 Pro Max 3 Axis Desktop DIY Mini Wood Router Kit Engraver Woodworking PCB PVC Milling Engraving Carving Machine GRBL Control with ER11 Collet (3018 Pro Max)

  • ♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • 3018 PRO MAX machine is very easy to install,stable structure,our parcel also include english user manual..
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • Supporting files:G-code (.nc/.txt/.tape/.gcode).
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and ot....
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ✅Powerful 500W Spindle : 3-Axis CNC router machine will allow you do both caving and engraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
  • ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quie....
Check Stock

LOYALHEARTDY 9 Teeth Crank Milling Machine Knee Handle Mill Part Swivel Handle for Bridgeport

  • CNC 3018 Router Machine: CNC 3018 PRO is an upgraded version of 3018 CNC. We provide a detailed user manual, assembly instructions, and installation video for your convenience. Assemble the engraver machine according to the installation instructions. You can enjoy the delight of engraving plastics, soft aluminum, acrylics, PVC, PCB, and many more. This product does not include a laser head and can be purchased by yourself..
  • Large Working Area: The effective engraving area of this engraving machine is 11.8(X) x 7.1(Y) x 1.8(Z) inches. Three refined axes are designed to achieve plane engraving. With the knob, the axes can be moved manually, which facilitates the carving tool settings. The driving units consist of stainless steel screw rods. It uses double copper nuts to clear round trip errors..
  • Excellent Motor: This CNC engraving machine is equipped with three stepper motors(1.3A.
  • 0.25 Nm torque) and 775 DC(12-24V) 24V spindle motors with a rotational speed of 10000 r/min. And the engraver supports Windows 7, Windows 8, Windows 10, Linux, macOS system, and other software to directly import JPG, BMP, PNG, DXF format files for engraving..
  • Upgraded Control Board: The integrated GRBL control features full functionality and stability. And the advantages ....
Check Stock

CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine

  • ♞【Upgrade Version 3018 Pro with Offline Controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • you can operate this machine without connect the computer.
  • offline controller included a SD card reader to write into the root directory G-code files or NC file.
  • Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
  • ♞【Main Feature】 Working area:30x18x4.5cm.
  • Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copp....
Check Stock

TOPCHANCES 900mm Travel Length Linear Stage Actuator DIY CNC Router Parts X Y Z Linear Rail Guide Motion Slide Table Ball Screw Stage Actuator Sfu1605

  • Ball screw type: 1605 (diameter 16mm, lead 5mm (screw can be replaced by 1610/1620/2020/2005 C7 level).
  • Horizontal Load: 40KGS/Vertical Load: 15KGS/Speed: 1-50mm/s.
  • Stroke: 100mm/200mm/300mm/400mm/500mm/600mm/700mm/800mm/900mm/1000mm(optional).
  • Z-axis slide, with a stepper motor, 3 axis CNC engraving machine modification tool..
Check Stock

TOPCHANCES 600mm Travel Length Linear Stage Actuator DIY CNC Router Parts X Y Z Linear Rail Guide Motion Slide Table Ball Screw Stage Actuator Sfu1605

  • Ball screw type: 1605 (diameter 16mm, lead 5mm (screw can be replaced by 1610/1620/2020/2005 C7 level).
  • Horizontal Load: 40KGS/Vertical Load: 15KGS/Speed: 1-50mm/s.
  • Stroke: 100mm/200mm/300mm/400mm/500mm/600mm/700mm/800mm/900mm/1000mm(optional).
  • Z-axis slide, with a stepper motor, 3 axis CNC engraving machine modification tool..
Check Stock

Centroid 4 axis Acorn DIY CNC motion controller kit REV 4 with CNC software replaces MachMotion,WinCNC,Mach3,EMC2,KCAM4,Smooth Stepper

  • ♞【Upgrade Version CNC3018 Pro Max】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for....
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 /....
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the....
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other....
  • ♞【GRBL Software】Our parcel include a 4G USB flash drive,it include the installation instructions,user manual and GRBL software.
Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

  • ♞【Product】3 Axis nema23 stepper motor driver controller kit.
  • ♞【Application】This cnc kit are widely used in engraving machine, printer,....
  • ♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
  • ♞【Driver】CW5045 driver Voltage: DC 24-50V.
  • Current: rated maximum output reaches: ±4.5A.
  • ♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
  • ♞【Power supply】400W,36V/9.7A switching power supply.
Check Stock

ANNOY TOOLS CNC Router Kit, All Metal 3018Pro Upgrade, 500W Spindle Motor with Limit Switch and Emergency Stop,XYZ Working Area 300 x 180 x 60mm, Wood Carving Machine

  • ⭐️Easy to use: 3018pro upgraded version, simple and sturdy construction allows you to assemble it in less than 30 minutes out of the box. Entry-level CNC engraving machine that can provide a good experience for novice as well as wood carving machine enthusiasts..
  • ⭐️Powerful power: The 3018plus body is all made of aluminum alloy, which is stronger and more stable. The spindle adopts 500W motor, different from 775 motor, which can engrave and cut more materials..
  • ⭐️open-source Grbl v1.1,which is suitable for all engraving machine control software based on the same version of GRBL. Support Windows XP, win7, win8, win10, we provide software instructions in the u disk. The package contains assembly instructions..
  • ⭐️Design: Unlike the conventional 3018/3018pro, the Z-axis has a working stroke of 60mm and more room for creation. 52mm diameter Z-axis, leaving a square slot of 40*40mm, is compatible with the laser engraving module. The machine is equipped with 6 limit switches and an emergency stop switch to provide safety for your creations..
  • ⭐️User Experience: In order to bring you a better CNC experience, 24-hour customer service is available online to answer your questions and solve your problems..
Check Stock

MT3 BT30 ER25 8000r/m Engraving Spindle Unit Power Head Induction Motor Mechanical Kit w/370W Motor For CNC Engraving Milling Machine USA STOCK

  • ♞【Upgrade Version CNC3018 Pro Max with offline controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • 3018 PRO MAX machine is very easy to install,stable structure,our parcel also include english user manual.Supporting files:G-code (.nc/.txt/.tape/.gcode).
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module.【Working area】30x18x4.5cm.
  • Type:USB port Desktop cnc router【System requirements】Windows XP / Win 7 / Win 8 / Win 10 / Linux.
  • ♞【Spindle&Stepper Motor】775 spindle motor (12-36V) 24V:10000r / min.
  • Collet: ER11 3.175mm (Can be equipped with 0-7mm).
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copper and aluminum and other materials, but can not carve hard metal, jade or other very hard texture of the items. if you have the module....
Check Stock