Top 3 flute Reamer

17/32 HSS Hand Reamers, Spiral Flute, Right Hand Cut, Michigan Drill Series 565

• Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
• Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
• Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
• Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
• Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..

ADJUSTABLE EXPANDING HAND REAMER 4 PIECE SET 1/4\- 3/8\ - NEW MICRO REAMER SET

• Alloy Tool Steel Reamer: Hard and durable, reaches H8 level of drilling accuracy, and reduces surface roughness of workpieces.
• Uncoated Tool: Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications.
• Hand Reamer: Reamer can be hand operated by use of wrenches and used for light cut, repair work, removing stock or simply for enlarging holes.
• Straight Flute Tool: Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts. Heat resistance, long service life.
• Application: Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..

3/4\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56063, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

7/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56017, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• Morse taper shank #2, For Reaming Abrasive Material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

1 3/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56049, USA Made

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 7/8 " shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

Drill America 11/16\ HSS Straight Shank Machine Expansion Reamer (Pack of 2)

• When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
• 3/4 " shank diameter, For Reaming abrasive material.
• This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..

Drill America Bridge (Construction) Reamer 15/16\ Magnetic Hex Shank Bridge Reamer

Drill America 1\-60 High Speed Steel 3 Flute Center Reamer, Dew Series

• High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
• Round shanks allow use with a wide variety of toolholding systems.
• Through-hole flute style has a single flute that passes through the cutting head to reduce vibration and chip clogging.
• Designed for countersinking holes for centers or for enlarge existing holes.

uxcell 13.75mm-15.25mm Cutting Diameter HSS Adjustable Hand Reamer Milling Cutter

• Cutting Hole Size : 13.75mm-15.25mm/ 7/13.
• Square End Size : 6 x 6mm/ 0.2" x 0.2"(L*W).
• Total Size : 160 x 14mm/ 6.2" x 0.5"(L*Max.D).
• Package Content : 1 x Adjustable Hand Reamer.

ikkle Screwdriver Holder, Wall Mounted Tool Storage Organizer, Pliers Rack Chisel Holder, Upgrade Wood Shop Tools Rack Wrench Clamps Screwdriver Organizer for Workshop Garage and Workbench

• The General Tools and Instruments 131 Screwdriver Handle Reamer, 3/32” – 3/8"offers high-powered cutting in a design that is easy to use.
• The fluted handle allows a familiar, screwdriver grip for heavy cutting and deburring.
• Works easily on steel, brass, aluminum, plastic, wood and wallboard.
• General's easy-to-use reamer is perfect for in home plumbing.
• Actual reamer made of hardened and ground tempered steel.

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

• The reamer range is 15/32 inch to 1-1/2 inch..
• Product includes 11Pcs high speed adjustable hand reamers H4-H14..
• The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
• Adjustable reamer is straight flute with straight handle..
• The reamer is suitable for drilling machines and other machine..

1-3/32 High Speed Steel Expansion Reamer Straight Flute Taper Shank