Top 3000lb Winch

12V 250A Winch Solenoid Relay Contactor Thumb Truck for ATV UTV 2000-5000lbs Winch with 6 Protecting Caps - Ovsor

  • 【PRODUCT PARAMETER】- Voltage - 12V, power – 250A, capacity - 2000-5000lbs, for ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb Application..
  • 【HIGH QUALITY】 - Made of strong, weather-resistant steel and powder-coated black surface, with super durability. OEM of high quality KFI winch kit is a great alternative to replace contactor..
  • 【MULTIFUNCTIONAL APPLICATION】- For ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP 1500lb-5000lb Application. Direct Replacement for UTV ATV Winch Solenoid Relay Contactor Switch 12V 250 AMP..
  • 【INSTALLATION GUIDE】- Easy to install. The two wires - Green and Black which go to the switch that controls In and Out on a winch. Blue and yellow go to motor, Black and red go to battery..
  • 【AFTER-SALES SERVICE】- If the product fails or other problems, you can contact us at any time, we will solve the problem for you within 12 hours..
Check Stock

SuperATV 4500 lb Winch for UTV/ATV | Complete Black Ops Winch Kit | Waterproof Seals and Solenoid | 1.3 HP Motor | 166:1 Gear Ratio

  • 【 Fits】Fits most bumpers or winch mounts with a 3.0" x 6.6" (76 x 168mm) mounting bolt pattern | Please Note : Requires machine-specific mounting plate or winch ready bumper (sold separately).
  • 【4500 LB Winch】Our SuperATV Winch is ready to make sure you're not stranded on the trail! | Powerful permanent magnet DC 12V 1.3 HP motor | 4500 lb. rated line pull synthetic 50' rope | 166:1 gear ratio | Winch dimensions (LxWxH): 14.49" x 4.60” x 4.37" | Automatic braking applied to the drum when motor is stopped or a load is attached.
  • 【Kit Includes】4500 lb. Black Ops Winch, 50' synthetic rope, wired dash rocker switch, aluminum hawse fairlead-6.0" (152.4 mm), fairlead support bracket, winch hook kit, hook pull strap, rope stopper, heavy-gauge extended wiring and waterproof solenoid (long enough for four-seaters).
  • 【Synthetic Rope vs. Steel Cable】Synthetic rope is flexible and it won’t shred your hands from frayed steel wire. It also won’t kink or rust—synthetic ropes are built for the mud and muck you find on the trail where steel cable is no....
Check Stock

SuperATV 4500 lb Black Ops Winch with Heavy Duty Winch Mounting Plate for 2019+ Polaris RZR XP Turbo/RZR XP4 Turbo | Complete RZR Winch & Winch Mount Kit Ready for Install! | No Drilling Required

  • ✔️ 【Fitment】2019+ Polaris RZR XP Turbo / XP 4 Turbo.
  • 【Complete, Bolt-On Ready Winch Kit】The strongest and safest way to mount a winch to your UTV. When you bury it in mud and need a winch out, SuperATV’s  RZR XP Turbo winch mount has the strength to get you unstuck..
  • 【4500 lb. SuperATV Black Ops Winch】100% Waterproof Winch | Permanent Magnet 12V 1.3 Hp Dc Motor | 4500 Lb. Rated Line Pull Synthetic 50' Rope | 166:1 Gear Ratio | Winch Dimensions (Lxwxh) = 14.49” X 4.60” X 4.37” | Mounting Holes: 76mm x 169mm (3" x 6 5/8") / 76mm x 124mm (3" x 4 7/8")  | Fairlead Bolt Pattern: 109mm (4.29")  / 152mm (5.98").
  • 【Machine Specific Mounting Plate】Mounts 4500 lb. Winch in factory location (above front differential) | Made with 3/16” heavy-duty steel plating | UV-resistant wrinkle black powder coating prevents corrosion | No drilling required!.
Check Stock

X-BULL 13,000 lb Winch XRS Speed with Wireless Remote and Synthetic Rope for UTVs/SUVs | Permanent Magnet DC 12V, 6.0 HP Motor | 12.4' Length Wiring | 201.6:1 Gear Ratio (100.8:1 for high Speed)

  • 【13000 LB SPEED Winch】X-BULL SPEED Winch is for the biggest machines out there. Whether you need a monster side-by-side winch that can pull through anything or a beefy winch that can rescue your heavy weight ride, you want XRS. Dimensions (LxWxH)23.6”x13.4”x10.2”(600x340x260mm).Permanent magnet DC 12V, 6.0 HP motor. 201.6:1 gear ratio (100.8:1 for high speed).Switch to high speed to pull the synthetic rope in fast..
  • 【Kit Includes】13,000 lb. XRS Winch, 3/8" x 85' synthetic rope, 2 -In-1 wireless remote with water-resistant receiver, wired dash rocker switch, heavy-gauge extended wiring and waterproof solenoid, winch hook kit, hook pull strap, rope stopper, and all hardware and instructions. Length of wiring: 12.4ft .Remote range: 35m.
  • 【Technical Specifications】Rated for UTVs and big SUVs .Bolt Mounting Pattern: 10.00+0.015”x4.5+0.01”(254x114.3mm), Fairlead Mounting Pattern: 7.95” (202mm) .Instructions can be accessed through owner’s manual..
  • 【Easy Connection】We use a 13,000 lb synthetic winch rope for good reason. It’s easier to handle than steel cable, more versatile, and more durable. All wires of the XRS-13000 winch are copper wire.Environmental protection, low resistivity, high strength, low heat, low electrical l....
Check Stock

AC-DK 12V 2000-lb. ATV/UTV Electric Winch, Off-Road Steel Cable Winch for Trailer Boat RV Towing Winches, ATV/UTV Winch with Big Yellow Wired Remote and Winch Mounting Plate

  • 2000 lb ATV WINCH KITS: AC-DK new 2000 lb ATV/UTV steel cable winch kits, there are all the winch accessories you need, and the black matte surface treatment is more delicate and textured. Fully update the stability and operability of the connection, bringing you a brand new and reliable experience..
  • EASY TO INSTALL AND USE: The winch accessories include a large yellow remote control handle, you only need to connect the power cord of the handle: red to the red terminal of the winch, black to the black terminal of the winch.
  • the other 2 terminals: red to the power supply "+", black to the power supply "- ", by operating the handle switch, you can quickly use the winch, bringing you a new experience..
  • ADVANCED PLANETARY GEAR SYSTEM: The winch uses an advanced combined planetary gear system with a gear speed ratio of 153:1, which is higher and faster than other winches, saving your time and bringing you a better experience..
  • HIGH-EFFICIENCY & STABLE OPERATION: The 2000 lb. winch powered by a 0.82kw/1.1hp output permanent magnet DC 12V motor, provide more sufficient power and stable output, and redu....
Check Stock

2017 Kawasaki Teryx 4 Teryx 800 Winch Mount 100935

  • ✔️【 Fits】2015+ Kawasaki Mule Pro FXT | 2016+ Kawasaki Mule Pro DX / Kawasaki Mule Pro DXT / Kawasaki Mule Pro FX / Kawasaki Mule Pro FXT Ranch....
  • 【Complete, Bolt-On Ready Winch Kit】Ready to make sure you are not stranded on the trail? This Kawasaki Mule Winch Mounting Plate Kit is exactly....
  • 【6000Lb SuperATV Winch】Our SuperATV Winch is 100% Waterproof Winch | Powerful Permanent Magnet 12V 1.9 Hp Dc Motor | 6000 Lb. Rated Line Pull....
  • 【Machine Specific Mounting Plate】Made with 3/16” Steel Plating | UV-Resistant Wrinkle Black Powder Coating Prevents Corrosion | No drilling....
Check Stock

SuperATV Black Ops 4500 LB Winch with Winch Mounting Plate for 2014-2018 Polaris RZR XP 1000 / RZR XP 4 1000 | Complete RZR Winch & Winch Mount Kit Ready for Install!

  • ✔️【 Fits】2014-2018 Polaris RZR XP 1000 / RZR XP 4 1000.
  • 【Complete, Bolt-On Ready Winch Kit】 Includes our Black Ops 4500 lb. SuperATV Winch and a heavy-duty Winch Mounting Kit specifically made to fit perfectly on your Polaris RZR. | Powder coated for long-lasting strength and then torture tested to ensure a lifetime of dependable performance..
  • 【4500 LB SuperATV Winch】100% Waterproof Polaris Winch | Permanent Magnet 12V 1.3 Hp Dc Motor | 4500 Lb. Rated Line Pull Synthetic 50' Rope | 166:1 Gear Ratio | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) / 3” x 4 7/8” (76mm x 124mm) | Fairlead Bolt Pattern:  5.98” (152mm) / 4.29” (109mm).
  • 【Machine Specific Mounting Plate】Mounts Polaris RZR Winch in factory location (above front differential) | Made with 3/16” steel plating | UV-resistant wrinkle black powder coating prevents corrosion | No drilling required.
Check Stock

SuperATV Black Ops 6000 lb Winch with Winch Mounting Plate for 2020+ Polaris RZR PRO XP/RZR PRO XP 4 | Complete RZR Winch Kit Ready to Install!

  • 【 Fits】2020+ Polaris RZR PRO XP / RZR PRO XP 4 | Please Note: Not compatible with Polaris front high coverage bumper, part # 2883749 / not compatible with winches using a 76mm x 124mm (3" x 4 7/8") mounting bolt pattern..
  • 【Complete, Bolt-On Ready Winch Kit】Ready to make sure you are not stranded on the trail? This kit is exactly what you need. It includes our Black Ops 6000 lb winch and a winch mounting kit specifically made to fit perfectly on your Polaris RZR. A strong mount is just as important as a strong winch—don’t get caught with a mount that can’t take the weight of your machine..
  • 【6000 lb SuperATV Winch】100% waterproof Polaris RZR winch | Powerful permanent magnet 12V 1.9 Hp Dc Motor | 6000 lb. rated line pull synthetic 50' rope | 266:1 Gear ratio | Winch dimensions (Lxwxh) = 14.56” X 4.41” X 4.86” | Mounting holes: 76mm x 169mm (3" x 6 5/8") | Fairlead bolt pattern: 152mm (5.98").
  • 【Machine Specific Mounting Plate】Mount made specifically to fit your PRO XP | Made with 3/16” steel plating | UV-r....
Check Stock

SuperATV 3500 lb Black Ops Winch with Heavy Duty Winch Mounting Plate for 2019+ Polaris RZR XP 1000 / RZR XP4 1000 | Complete Kit Ready for Install! | 3/16\ Steel Plating | UV-Resistant!

  • ✔️ 【Fitment】2019+ Polaris RZR XP 1000 / RZR XP 4 1000.
  • 【Strength You Can Rely On】Our Polaris RZR XP 1000 Polaris RZR Winch Mount gives you a strong, secure mounting point for your Black Ops Winch. You’ll be able to ride freely and enjoy your time behind the wheel, knowing that SuperATV has got your back should one of those low-talent moments occur..
  • 【3500 LB SuperATV Winch】100% Waterproof 3500 lb Winch | Permanent Magnet 12V 1.2 Hp Dc Motor | 3500 Lb. Rated Line Pull Synthetic 50' Rope | 166:1 Gear Ratio | Winch Dimensions (Lxwxh) = 12.76” X 4.60” X 4.37” | Mounting Holes: 3” x 6 5/8” (76mm x 169mm) / 3” x 4 7/8” (76mm x 124mm) | Fairlead Bolt Pattern:  5.98” (152mm) / 4.29” (109mm).
  • 【Machine Specific Mounting Plate】Mounts Polaris Winch in factory location (above front differential) | Made with 3/16” Heavy-Duty Steel Plating | UV-Resistant Wrinkle Black Powder Coating Prevents Corrosion | No drilling required!.
Check Stock

Stark USA Universal Portable Foldable Trailer ATV Hitch Winch Mount/Cradle w/Hitch Receiver 2\ Winch Mount Recovery Winches (10\ x 4-1/2\), Black (25084)

  • Large Carrying Capacity - Perfect for 8000 lb to 13000 lb Winches, solid steel construction with one-piece fully welded design for extra strength.
  • Heavy Duty Steel Construction - Our winch mounting plate is made of heavy duty steel, durable construction insures its long lifespan.
  • Carrying Handle Design for Easy Portability - Includes (2) convenient carrying handles to easily allow you to move your winch on and off your vehicle..
  • Easy Installation - Our portable winch hitch receiver mount allows you to easily mount your winch to any standard 2” x 2” receiver.
  • Package Include - Mounting rack package includes pin and clip, as well as 10" upper center guide bolt pattern and 10" x 4-1/2" standard winch mounting pattern, everyone can easily install this cradle winch.
Check Stock

SuperATV Winch Mounting Plate for Polaris Ranger Midsize 400/500 / Crew / 570/800 (See Fitment) | Powder-Coating Prevents Corrosion | Compatible with Many OEM and Aftermarket Winches

  • ✔️【Fits】2011-2014 Polaris Ranger Midsize 400 | 2011-2013 Polaris Ranger Midsize 500 | 2012-2013 Polaris Ranger 500 Crew | 2017+ Polaris Ranger Midsize 500 | 2014-2021 Polaris Ranger Midsize 570 | 2014 Polaris Ranger Midsize 570 Crew / 800 | NOTE: 2017+ mounts are only compatible with the 3500lb winch..
  • 【Ride More, Worry Less】SuperATV’s Polaris Ranger Winch Mounting Plate for the Polaris Ranger Midsize provides a secure mounting point for your Black Ops Winch, ensuring a safe and easy escape when you find yourself stuck in the mud. Knowing that you’re prepared for anything lets you ride more and worry less, because isn’t that what off-roading is all about?.
  • 【Powder-Coated Steel Construction】 Made out of 3/16” heavy-duty steel plating. They arrive at your doorstep with all required hardware, making installation a breeze. Your winch mount is laser cut and CNC brake press bent to give you a product that is as tough as you are. ....
Check Stock

Tyrannosaurus Winch Cradle Mounting Plate Universal Recovery Mount Bracket Kit for 8000 lb-15000 lb Winch

  • 【Universal】10" x 4-1/2" Standard Winch Mount Pattern fit for 8000lb -15000 lb Winch..
  • 【Easy to Install】Bolts and clamps are included. As well as the 10" top center guide bolt mode and the 10" x 4 1/2" standard winch mounting mode, everyone can easily install this cradle winch.
  • Suitable for truck, ATV/UTV, trailer and any four-wheel drive vehicle..
  • Heavy duty material and black powder finish, it has superior durability, long service life..
  • This item owns one year warranty. If you have any problem, please feel free to contact us.
Check Stock