Top 30kw Commercial Power Saver
Honda Genuine 79581-S84-A41 Heater Control Knob
- Fitment Type: Direct Replacement. Easy install, simple operation..
- Suitable Model: for Eberspacher Airtronic D4 D4S..
- Material: Made of Stainless Steel, durable for use..
- Size: (Approx) Outer Diameter(2KW) 1.69inch/43mm, Height(2KW): 4.17inch/106mm.
- Outer Diameter(5KW) 2.05inch/52mm, Height(5KW): 5.39inch/137mm..
- Power Available: 2 power types for you to choose, 2KW, 5KW..
Check StockStiebel Eltron Tankless Heater – Tempra 12 Plus – Electric, On Demand Hot Water, Eco, White
- ...ol water flow. Savings monitor even shows how much you save on energy costs.
- EASY OPERATION – Electronic switch activates the hot water heater and it’s noise free while in use. Has a digital temperature display and preset temperature and memory buttons, while the interior solid copper heating system does all the power work.
- TEMPRA 12 PLUS – This specific model is 12kW, 240V, requires a min recommended electric service of 100 A, and offers an output water temperature of 68° to 140°F. Check our guides below to compare features of our various Trend and Plus models, each available in different kW levels.
- WARRANTIES INCLUDED – Stiebel Eltron’s top-rated electric tankless water heaters perform with the highest standards for comfort and reliability. Our 7-Year Leakage and 3-Year Parts Warranties are included with purchase.
Check StockStiebel Eltron Tankless Water Heater – Tempra 20 Plus – Electric, On Demand Hot Water, Eco, White
- ...ol water flow. Savings monitor even shows how much you save on energy costs.
- EASY OPERATION – Electronic switch activates the hot water heater and it’s noise free while in use. Has a digital temperature display and preset temperature and memory buttons, while the interior solid copper heating system does all the power work.
- TEMPRA 20 PLUS – This specific model is 19.2kW, 240V, requires a min recommended electric service of 125 A, and offers an output water temperature of 68° to 140°F. Check our guides below to compare features of our various Trend and Plus models, each available in different kW levels.
- WARRANTIES INCLUDED – Stiebel Eltron’s top-rated electric tankless water heaters perform with the highest standards for comfort and reliability. Our 7-Year Leakage and 3-Year Parts Warranties are included with purchase.
Check StockVitantonio Pizzelle Maker a set of 2 pizzelle iron PVWH-10-PZ
- Electric ice cream cone maker material】stainless steel and non-stick coating.
- 【Stainless steel body with unique designed roll maker machine is made of stainless steel and non-stick coating Material, easy to clean, durable and....
- 【Temperature control】equipped with temperature Selector and timing controller, which can accurately control the temperature and working Time. Can....
- 【Wide application cream cone machine fits for the production of various crepes, such as egg roll, pizza, tortillas, pancakes, potato pie and so on.....
- 【Home use & commercial】the electric commercial ice cream cone machine can be widely used in organization, school, restaurant, cafeteria processing....
Check StockAnteenna TW-103 3 Position Coaxial Switch for 144/440MHz HAM CB or HF/VHF/UHF Radio UHF Female (SO-239) Connector Plated Golden
- Connector: SO-239 ( UHF Female ) Plated Golden.
- Power Rating: 1.5KW DC-30MHz / 1KW 30-150MHz / 500W 150-800MHz.
Check StockElectric Ice Cream Cone Waffle Maker Machine 1200W Stainless Steel Nonstick Surface for Commercial Home Use (Electric Ice Cream Cone Waffle Maker Machine)
- Electric Ice Cream Cone Maker : stainless steel and non-stick coating.
- Temperature: 50℃-250℃ (122℉ - 482℉)..
- Nonstick Coating: The cooking tray is covered with nonstick Teflon coating, which makes it easy to clean and maintain,durable and environmental protection..
- Parallel Heating Plates: 1.2KW power, high conductivity and fast heating makes the machine highly efficient and ready for commercial use.
- Temperature Control &Timing control : Equipped with Temperature Selector (accurate temperature control: 50℃-250℃) and 5 minutes timing controller, which can accurately control the temperature and working Time. Can prompt that it is done, convenient and quick,safe and reliable..
- 【Note】 The product will be wrapped with a protective film. After receiving the product, you need to tear off the protective film before using it. Please note that it is not damaged. If you receive any defective products, please contact the seller first. We will give a satisfactory solution within 24 hours! (Please contact Arraige customer service).
Check StockProForm CST 505 Smart Treadmill
- 20" x 60" Non-Stretch, Commercial Tread belt.
- Precision Machined and Balanced Non-Flex Rollers.
- Space Saver Design with Easy Lift Assist.
- 3-Year Parts Warranty and 1-Year Labor Warranty.
- Rated as a 'Best Buy' from The Treadmill Doctor.
Check StockAnteenna TW-103Ni 3 Position Coaxial Switch for 144/440MHz HAM CB or HF/VHF/UHF Radio UHF Female (SO-239) Connector Plated Ni
- Connector: SO-239 ( UHF Female ) Plated Ni.
- Power Rating: 1.5KW DC-30MHz / 1KW 30-150MHz / 500W 150-800MHz.
Check StockMOES Dual Power Controller 50A 5500 Watt Automatic Transfer Switch for Off Grid Solar Wind System ATS DC 12V 24V 48V AC 110V 220V.
- 【Beneficial to Solar or Wind System】: On cloudy or windless days when your battery gets low, it will automatically switch to grid power, protect your battery..
- 【Works like an opposite direction UPS】: The ATS controller will switch to grid power when batteries votagle are lower than cut off point,it will switch back to battery power when the batteries votagle are higher than recovery point..
- 【Auto distinguish】: DC 12/24/48V,AC 100-120V 60HZ / 220-240V 50HZ auto distinguish.User can define the Cut-Off and Recovery Voltages.Recovery voltage must be higher than Cut-off voltage. Battery type: Suitable for Sealed,Gel,Lead-acid,Lithium battery and so on. as long as the voltage of your battery are within the voltage ranges in the followings.9-17V at 12V system.
- 【Big Power】: 5.5kw(110V) or 11KW(220v),Fast Transfer time:Inverter transfer to public power ≤10ms,public power transfer to inverter ≤16ms..
- 【LCD display】: Battery real-time voltage.
- working status of public power,inverter and battery.⭐Note: The controller needs to connect the battery, powered by the battery and get battery power data..
Check StockMYSWEETY 29 Inch Colorful Hair Mannequin Head Hairdressing Practice Training Doll Heads Cosmetology Hair Styling Mannequins Heads with Clamp + Practice Tools PINK
- ✔️Package include: ①1 x 2.2KW 220V Spindle Motor ②1 x 2.2KW 220V VFD ③1 x 75W 220V Water Pump ④1 x 196 in Water Pipes ⑤1x40 in Electric....
- ✔️2KW Spindle Motor:Technical Parameters:φ3 x 13 in (Diameter: 7.5 cm x Length: 33.6 cm).
- ✔️Water Pump:This is a high-performance, energy-efficient pump and is well-designed for use in spindle, suitable for 0.8KW, 1.5KW, 2.2KW, 3KW....
- ✔️1 Year Warranty:We offer 1 year warranty, if you have any questions, please contact us, our customer service team are waiting for helping you....
Check StockComplete 6KW Off-Grid Solar Power Station 120V/240V Split Phase Solar Energy Storage System
- Split phases 120V 3KW / 240V 6KW continuous output power (12KW surge).
- Standalone Working for Off-grid Power Supply..
- Supports UPS and Backup Power supply mode..
- Easy DIY: Inverter, solar charger, battteries are all-in-one prewired unit..
Check StockClipperCreek Level 2 EV Charger , Safety Certified, 32 Amp, 240v, Hardwired, 25ft Cable, J1772, Compatible with All Electric Vehicles, HCS-40 Home Electric Car Charging Station by Enphase
- CERTIFIED SAFE: ClipperCreek level 2 EV chargers are safety certified by ETL, an Independent Nationally Recognized Testing Laboratory, to UL 2594 standards and are ENERGY STAR certified. Designed in California as commercial car charging stations, they are built tough to withstand tire runovers and a wide range of temperatures. They also include fully sealed outdoor ready NEMA 4 enclosures to keep internal components dry and the elements out..
- CHARGE 2 EVs ON ONE CIRCUIT: With the HCS-D50 hardwired 240V level 2 dual EV charger you can charge one EV with 40 Amps and 9.6kW of power, providing up to 38 miles per hour of charging, or charge two EVs with 20 Amps and 4.8kW of power, providing 19 miles per hour of charging. (The HCS-D50 requires a minimum 50 Amp dedicated circuit and the miles per hour charge rate will vary depending on your EV's make and model.).
Check Stock