Top 30mm Scope Mount 2

ApexHorizon Scope Rings Optic Mounts - Titanium Alloy Scope Rings 30mm for Picatinny Rail, Tactical Heavy Recoil Rifle Scope Rings Precision Mounts Rings (Scope Rings 30mm Mount)

  • Titanium Alloy Scope Rings: Made of titanium alloy and precision-machined aircraft-grade 6061 aluminum alloy. Titanium alloy mounting part is high solidity, shockproof, anti-shake, anti-corrosion, and wear resistance. A reliable material to make sure your scope is precisely and firmly mounted on Picatinny rail..
  • 30mm & Medium Profile: Set of 2 scope rings are both 1.18 inch/30mm diameter. 40in/Ibs ring torque, 2 screws for rail clamping, and 4 screws on top to ensure your rifle scope reaches alignment. Mount on rail easily, stay aligned, and without any wobble. Removed or installed quickly by using Allen key..
  • Rings for Picatinny Rail: The optic rings fit for standard Picatinny rail. The recoil control key holds the scope rings perfectly still and will not shift or move under fierce recoil. By utilizing titanium alloy on the clamping base, the scope rings achieve a way longer service life than similar scope rings and work perfectly under extreme environments..
  • Professional Choice: The scope mount rings are heavy duty style yet lightweight so that it withstands heavy recoil and does not add up extra weight. Each ring is about 81g. Perfect for outdoor hunting, tactical and precision target practice..
  • 2-Piece Scope Rings Design: Different rifle scope has a ....
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

EZshoot Reflex Sight with 4 Reticles Red Dot Sight, Reflex Holographic Optic Scope with 20mm Rail Mount ，Absolute Co-Witness

  • ✌【Perfect 1" Scope Rings For 11mm Dovetail Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 Pcs Medium Profile + 2 Pcs High Profile in one package. These scope rings fit for 3/8'' or 11mm dovetail rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.55'' gap from base of mount to bottom of ring, Item Height 1.77'', Dimension 1.61*1.77*0.83 Inch, Weight 1.55 Oz per ring.
  • 2 Pcs High Profile: 0.82'' gap from base of mount to bottom of ring, Item Height 2'', Dimension 1.61*2.0*0.83 Inch, Weight 1.83 Oz per ring..
  • ✌【Built-In Tape Protection & With Stop-Pin Design】 Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately. One of the high rings and one of the medium rings have a stop pin the bottom, Which prevents the ring from sliding once set..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field..
Check Stock

Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454 Engineering Professional Reticle Leveling System

  • INCLUDES: Torque Screwdriver Wrench, 10 screwdriver bits, Wheeler Level-Level-Level, 1" scope ring lapping bar, 30mm scope ring lapping bar, 1" scope ring alignment bars, 30mm scope ring alignment bars, lapping bar handle, lapping compound, thread lock.
  • VERSATILE: Provides virtually everything needed to properly mount any 1-inch or 30mm scope.
  • RELIABLE: Alignment and lapping of rings ensure maximum surface area contact between scope tube and rings.
  • ACCURACY: Reticle leveling is key for scope accuracy, the Level-Level-Level & the Professional Reticle Leveling System provide this, with an integrated bubble level for precise measurement & Reference Level with a magnetic bottom for added stability.
  • EASE OF USE: Securing fasteners properly is critical to accuracy, the Wheeler F.A.T. Wrench makes it easy.
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 0 MOA | Black

  • Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
  • Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

Monstrum Extended Series Offset Picatinny Scope Mount | 30 mm Diameter | 20 MOA | Black

  • Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
  • Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
  • Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
  • Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
  • Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.
Check Stock

PRI Polymer Ring Inserts - 30mm to 1 Inch. by Unknown

  • Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld.
  • 30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
  • Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
  • Scope rings come with an integrated level bubble mechanism for quickly checking if your rifle is lined up square with your target.
  • Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.
Check Stock

WestHunter Offset Cantilever Dual Ring Picatinny QD Scope Mount, 1 inch 30 mm Quick Release Scope Rings | Black

  • Position the center of the scope tube at a height of 1.42 in / 36 mm from the base.
  • The high profile QD cantilever scope mount fits for both 30mm and 25.4 mm (1 inch) tube optics with up to a 70mm outer objective diameter.
  • Scope mount with qick detach locks for Picatinny rail, can freely adjust the tightness of the base to ensure stability.
  • Precision CNC Machined from 6063 T5 aircraft-grade aluminum alloy and finished in anodizing.
  • Easy installation, perfect for shooters(Sold 1Pcs mount per package).
Check Stock

Rail Riser Mount for Red Dot Sights, Optics and Accessories, Full Size Scope Riser Mount for Scopes

  • ☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • ☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope..
  • ☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'').
  • ☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

ROUP Flashlight Mount Holder, Gun Rifle Shotgun Flashlight Mount Clamp Clip, Sturdy Quick Release Mount Holder for Multiple Tube Flashlight Torch Laser Scope Sight Telescope Diameter 25mm-30mm

  • The flashlight mount holder fits for body diameter 25mm-30mm. Please make sure the size of the product can meet your needs before you place an order (both objects should be the same diameter)..
  • The scope mount working with flashlights/torches/telescope sights (particularly suitable for HS-802 501B 502B hunting flashlight). Wide range of uses, ideal for hunting..
  • Very versatile mount that accommodates different diameter and lights at the same time..
  • Hole size — 25mm~30mm. Weight — 90g/3.2oz. Material — hight quality plastic..
  • Easy on and off. Does not scratch the scope. Attaching a flashlight to your night vision scope..
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock