Top 320gb Sata Hard Disk Drive

SATA Hard Drive Caddy Universal 12.7 mm SATA to SATA 2nd SSD HDD Hard Drive Caddy Adapter Tray Enclosures for DELL HP Lenovo ThinkPad ACER Gateway ASUS Sony Samsung MSI Laptop

  • Universal 12.7mm SATA 2nd HDD SSD Enclosure Hard Drive Caddy Case Tray for Laptop CD DVD-ROM Optical Bay Drive Slot.
  • 12.7 mm-thick Combo/SuperDrive with 13pin Slimline SATA interface. HDD Interface: 22pin SATA.
  • High performance SATA hard drive providing up to 500GB of additional internal hard drive space..
  • Fully integrated into laptop, no cables/PSU/software driver needed.Fast & Reliable connection in laptop, just as the primary HDD.
  • Laptop/Mother Board Interface: 13pin SATA.
  • It enables you to add a second notebook hard disk drive to any modular bay..
Check Stock

LSI Logic LSI00208 Logic MegaRAID 9260-16i 16-port SAS RAID Controller - Serial ATA/600 - PCI Express 2.0 x8 - Plug-in Card - RAID Supported - 0, 1, 5, 6, 10, 50, 60 RAID Level - 4 Total SAS Port(s) - 4 SAS Port(s) Internal

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset.
  • PCI-Express x2 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiring technology into the chipset..
  • Does not support Hardware RAID using Port Multiplier.
Check Stock

StarTech.com Standalone Hard Drive Duplicator, Dual Bay HDD/SSD Cloner/Copier, USB 3.1 (10Gbps) to SATA III HDD/SSD Docking Station, Hard Disk Duplicator Dock, Hard Drive Cloner (SDOCK2U313R)

  • DUPLICATE AND DOCK SATA DRIVES: This dual bay hard drive duplicator features standalone drive cloning of 2.5/3.5" SATA drives with no computer required. This dock can also be used as a USB to SATA adapter for quick access to your SATA drives over USB.
  • DRIVE COMPATIBILITY: Works with 2.5/3.5" SATA HDDS and SSDs of any capacity | 4Kn Compatible | OS Independent | Backwards compatible w/ SATA I/II | Includes 3ft USB-C/A cables and Universal Power Adapter | IDE adapter (SAT2IDEADP) sold separately.
  • DUPLICATION MODE: Standalone sector-by-sector duplication works with any file format and copies the entire drive, including empty sectors, at speeds up to 28 GB/min. Target disk must be equal/larger than the source disk.
  • SPECS: 2-Bay Duplicator Dock with TRIM | SATA III (6 Gbps) | USB 3.2 Gen 2 (10 Gbps) Host Connection (optional)| Tool-less/Tray-less Design | Top-Loading (Toaster style) w/ Drive Doors & Eject Buttons | Power & Status Multi-function LEDs.
  • THE IT PRO'S CHOICE: Designed and built for IT Professionals, this hard drive duplicator dock is backed for 2 years, including free lifetime 24/5 multilingual technical assistance.
Check Stock

Tccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock

I/O Crest 4 Port SATA III PCI-e 2.0 x2 HyperDuo RAID Card Marvell 9230 Chipset SI-PEX40057

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset..
Check Stock

AcomData Samba 3.5��� USB 2.0 (PATA-IDE/ SATA) Hard Drive Enclosure Kit, Radiant Red (SMBXXXU2E-RD)

  • UNIVERSAL HARD DRIVE CONVERTER- Support 2.5 “/3.5” SATA HDD and SSD.
  • DVD/CD-ROM, CD/DVD-RW Optical Drive, you can easily connect your hard drives through a USB port as an additional external hard drive to read& backup data, operate formatting hard drives, and transfer files.
  • HIGH-SPEED TRANSFER UP TO 5GBPS- SATA IDE to USB adapter Data transfer rates up to 5 Gbps, backward compatible with USB 2.0/1.1. It has a dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector, which you can get all your hard drives combo.
  • SUPPORT DRIVE HUGE CAPACITY UP TO 6TB: Designed to be lightweight and compact supports a hard drive capacity of Up to 6TB capacity. SATA to USB 3.0 adapter has a SATA III connector and two IDE connectors (40pin and 44pin). we Provide a 4pin power cable for a 3.5″ IDE drive, Tips: Some IDE hard drive is old, you need to set a jumper to turn on the disk(set the master disk and the slave disk).
  • WIDE COMPATIBILITY: Hard drive adapter support hot-swapping. universally compatible with Windows 10/ 8.1/ 8/ 7/Vista/XP, Mac OS 9/ 10, Linux.
  • work with Xbox, Western Digital, Seagate, Fujitsu, Samsung hard drives, etc. (When connecting two IDE hard drives, please set the master drive and slave drive based).
Check Stock

StarTech.com 4-Bay Hard Drive Duplicator and Eraser, External Standalone 1:3 HDD/SSD Cloner/Copier, USB 3.0 / eSATA to SATA Docking Station, Hard Disk Copier / Sanitizer / Wiper Tool (SATDOCK4U3RE)

  • DUPLICATE, ERASE AND DOCK: This 4-bay external cloner and drive eraser/ wiper performs standalone cloning or erasing of 2.5/3.5" SATA drives.
  • Hard disk docking station for quick access to your 2.5/3.5" SATA drives over USB or eSATA.
  • DRIVE COMPATIBILITY: Works with 2.5/3.5" SATA and IDE SSDs/HDDs of any capacity.
  • Included IDE cable adapters support 40-pin/3.5in and 44-pin/2.5in drives.
  • Hardware includes eSATA and USB-A cables and Universal Power Adapter.
  • DUPLICATION AND ERASE MODES: Up to 4.2 GB/min Standalone sector-by-sector cloning.
  • Target disk must be equal/larger than the source disk.
  • Supports Quick Erase & Secure Erase (NIST SP 800-88 Rev 1 Purge).
  • Disk mount / File transfer / Backup / Recovery tool.
  • LCD MENU DISPLAY: Use push button menu navigation to select duplication and erase modes, and check drive info.
  • USB 3.2 Gen 1 (5 Gbps) or eSATA (3 Gbps) Host Device Connection (optional).
  • Top-Loading w/ Drive Doors & Eject Buttons.
  • THE IT PRO'S CHOICE: Designed and built for IT Professionals, this hard drive copier an....
Check Stock

StarTech.com 1 1 Standalone Hard Drive Duplicator with Disk Image Manager for Backup and Restore Store Several Disk Images On One 2.5/3.5 SATA Drive HDD/SSD Cloner No PC Required SATDUP11IMG

  • DISK IMAGE LIBRARY MANAGER: This standalone 1:1 SATA duplicator can create a disk images library by managing several host disk images on a single....
  • DRIVE DUPLICATION MODES: 4 Duplication Modes: System and File, All Partitions, Percentage Copy and Sector-by-Sector (Whole Drive) | 6 GB/min Copy....
  • DRIVE COMPATIBILITY: Supports 2.5/3.5" SATA HDDs/SSDs of any capacity.
  • Includes HDD rubber pads and 4" & 20" SATA cables.
  • LCD MENU DISPLAY: Built-in library manager with push button navigation menu to display drive info, configure, and manage drives.
  • THE IT PRO'S CHOICE: Designed and built for IT Professionals, this hard drive duplicator is backed for 2 years including free lifetime 24/5....
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s. Integrated all-in-1 card reader (XD card / TF card / MS (Duo / Pro) card / CF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
  • One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT ....
Check Stock

CY SATA Hard Disk Drive Raid Adapter with 15 Pin 7 Pin + 15 Pin to SFF-8482 SAS 22 Pin Converter Adapter

  • Can connect SATA hard disk to SATA motherboard..
  • Can connect SAS hard disk to SAS motherboard..
  • Can NOT connect SAS hard disk to SATA motherboard. (unless your motherboard has SAS chipset).
  • Can NOT connect SATA hard disk to SAS motherboard.....
  • Can connect SAS HDD with SFF 8482 port to a SAS compatible SATA controller (hybrid controller)..
  • 7 Pin SATA ( Serial ATA )Male to 15 Pin Power Male and 22 Pin SAS SFF-8482 Hard Disk Drive Raid Adapter.
Check Stock

Copystars Duplicator case for build Blu-ray-CD-dvd-duplicator tower + power supply (5 bay)

  • COMPLETE STANDALONE : No computer or software required.
  • Duplicates SATA 3.5" and 2.5" hard drives / Solid State Drives.
  • TRANSFER RATE : Copy hard disk drives or solid state drives simultaneously at speeds up to 150MB per second (9GB per minute) - - depends on the speed of the Hard Drive Disk.
  • Works like an eraser with 3-Pass and 7-Pass DoD Erase functions.
  • Support most file formats, file size, and drive capacity.
Check Stock

I/O Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell 9215 Non-Raid with Low Profile Bracket SI-PEX40064

  • Compatible with SATA 6G, 3G and 1.5G Hard Drives.
  • PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots.
  • HyperDuo is configured with at least 1 hard disk drive (HDD) and up to 3 solid state drives (SSD). By embedding automated tiering technology into the chipset..
Check Stock