Top 3d Engraver Machine

ORTUR Laser Master 2 S2 LU2-2, 24V Laser Engraver Machine, 0.06mm Fixed-Focus Eye Protection Compressed Spot, 32-bit Motherboard, 5000mm/min Laser Engraving Area (390×410mm) for DIY Metal, Wood etc

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit Professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles..
  • ✅Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotaty rollers. Unleash your creativity on over one hun....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • 【Overview】ZBAITU M37 laser engraver cutter has 40W machine power and 5.5W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutte....
Check Stock

Hand Engraver Tool for Metal,HARDELL 13W Engraver with Stencils,120V Handheld Etching Tool for DIY, 5 Speed Engraving Tool with 7200 Strokes/Min,3 Carbide Points Included

  • 1.【SOFT RUBBER HANDLE】: HARDEll engraver handle has a soft rubber coating, the handle is ergonomically designed to perfectly fit the curvature of the hand grip, which can effectively reduce wrist fatigue and soreness after long hours of engraving work, giving you a comfortable and precise operating experience..
  • 2.【5-SPEED ADJUSTABLE ENGRAVING TOOL】: 5-Speed engraving pen can provide a variety of engraving depths and speeds according to your engraving needs. Handheld engraving machine is equipped with 3 replaceable tungsten carbide writing heads, allowing you to obtain detailed and satisfactory engraving results on a wide range of engraving materials. such as tile, metal (not applicable to hardened steel), stone, wood, leather, glass, PVC pipe, DIY crafts..
  • 3.【SMALL BODY, BIG POWER】: With a lightweight 12oz design, the 7200Strokes/Min 13W handheld engraver can fully meet the daily engraving needs of crafters. The comfortable pen design gives you more freedom in operation and is easy to carry, which can perfectly fit your private custom engraving needs..
  • 4.【VIBRATION TYPE ENGRAVING PEN】: Mental engraver using pure copper coil movement to provide surging power and longer life. Vibration engraving work principle, making the carving lines mor....
Check Stock

10W Output Laser Engraving Machine, JICCODA L1 High Accuracy 0.05 * 0.1mm Compressed Spot Laser Cutter Mini CNC Machine with 5.0 Bluetooth Technology Laser Engraver for Wood and Metal

  • [Upgraded 10W Laser mould] 10W JICCODA L1 laser engraver adopts the latest double-layer 5.5W laser technology , which can reach the speed of laser cutting up to 10,000mm/m and cut 10mm thickboard and 5mm acrylic plates at a single pass. The service of the laser module up to 10,000 hours in regular temperature..
  • [Built-in dual motors] Comparing the most laser machine has only one motors ,JICCODA L1 cutter machine master 2 motors inside laser frame in order to keep the laser engraver machine more stable while it engraving..
  • [Ultra-accuracy engraving compressed spot & fast laser cutting] 0.05*0.1mm ultra-accurate compression spot can achieve your varieties laser cutting and laser engraving for wood and metal, DIY creation activities and bring you a distinct grain pattern,vivid picture and clear-cut engraving and cutting experience. FR4 double-sided main board with glass fibre material strength the precise of our mini cnc machine..
  • [Easy assemble]The construction of high-strength aluminum alloy and ABS material makes the JIOOCDA L1 laser machine robust and stable. The laser cutting engraver has a disassembled modular design with the stable performance of the drive plate and the laser tube core with heat dissipation function. The laser engraver and cutting m....
Check Stock

Tool Engraving Machine On Off 01 Industry Sound, Sounds, Effect, Effects [Clean]

  • 【Double Compression Beam Technology to Achieve True 10w Output Power】A10 pro laser cutter and engraver machine, With 50W Machine Power, 10W Laser Module Output Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products..
  • 【Support offline engraving】The A10 pro 50W laser engraver is equipped with a terminal control panel, which supports offline engraving, so that you can engrave anywhere, anytime without the restriction of a computer..
  • 【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS and Linux). Engraving file format support: SVG, NC, DXF, BMP, JPG, PNG, etc..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
  • 【Quality Assurance and After - Sale Service】We have a professional customer service team. We provide the customers a year warranty , parts replacement and permanent technical support. Your concerns are a....
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • ...s steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving module kit protective lens can have no fingerprints, it will affect the cutting ability, and the performance of the module decreases..
  • SPECIFIC PARAMETER DETAILS – Fixed focus: 45mm.
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

Ball Vise Engraving Setting Tool 360°Rotation Professional Ball Vise 30 PCS Attachment Jewelry Engraving Block Tools Standard Block (3inch)

  • ...lity of the machine to cut and 36W is the machine power of the laser machine.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours.
Check Stock

LaserPecker L1 Laser Engraver, Mini Engraving Machine Portable Laser Etcher, Compressed Spot High Precision Grabadora Laser with Protective Goggles - Black

  • The Most Useful Mini Laser Engraver: Do you want to create inspiration anytime at home? Or want to make exclusive gifts for your friends and family during the holiday season? Or want to customize your logo in small batches? LaserPecker L1 Laser Engraver meet your needs!.
  • LaserPecker L1 Laser Engraver: 0.3mm Compressed Spot, engraving range: 3.9″*3.9″. Focal length: 7.5″(the distance from laser unit to the surface of engraved item). Support power supply through 5V 2A mobile power supply. COULD ENGRAVEING: Wood, Kraft paper, Leather, Fruit, Felt etc. COULDN’T ENGRAVEING: Metal, Glass, plastic, stone..
  • Compact Design: LaserPecker L1 Engraving Machine is very small size, only 2.6″ * 2.4″ * 2.1″, Weight 6 oz, can be mastered in one hand, it is a real handheld laser engraving machine. Perfect for entry-level creators, you can do a lot of inspiration without expensive prices and taking up less space..
  • Durable and Safe: Laser etching machine with high quality 1.6W laser head make durablity, better stability and long working time. Multiple safety features such as Working warning alert, Displacement automatically stops when engraving, Overheat shutdown, Enter password before work will keep you safe from accidents. Safe Certification: CE, FCC, FDA, R....
Check Stock

USB Rechargeable Engraving Machine with Bits Wrench Slicing, Mini Electric Engraver Etching Pen Cordless Rotary Tool Kit, Professional Engraved Pen for Jewelry Metal Glass Wood Ceramic Stone

  • ❤【Rechargeable & Intelligent Power-off】Our micro engraver pen powered by a rechargeable lithium battery and can be charged with USB cable. the electric engraver tool has intelligent overload protection chip. When the working resistance is too large, it will automatically cut off the power to prevent from damaging the engraving pen. Really safe to use..
  • ❤【High Efficiency & Adjustable Speed】our electric engraving pen power up to 25w when working, and this usb rechargeable engraving machine provide a high speed of up to 5000-25000r/min, with three levels of adjustable to meet your needs, The lowest speed can polish your nail in safe, the highest speed is also working on metal carving..
  • ❤【Reliable & Comfortable Grip】our electric engraver pen made of high-strength metal and selected electronic parts are used, which are wear-resistant, wear-resistant and have a long service life. The lightweight and ergonomic grip engraving pen allows you to use it like a pencil, with a comfortable hand feel, better control and precise engraving..
  • ❤【Wide Applications】Our cordless engraver pen used for carving glass, metal, ceramics, wood, pebbles, plastics, jewelry etc. This etching pen is a portable engraving tool that lets beginners and professionals....
Check Stock

Boquite Engraving Jewelry Machine Tools, Engraving Handpiece for Pneumatic Engraving Machine——Metal Engraver Hand Tool

  • ★【ERGONOMIC DESIGN】 Engraving Machine, Machinist Tools, The product is lightweight and convenient. Ergonomic design with overmold allows long-time working be more relaxing and cozy..
  • ★【HIGH QUALITY】 Engraving Tool, Die Grinder Made of high-quality metal material, durable in use，smooth surface, low vibration during operation and low calorific value..
  • ★【WIDELY USED】 Pneumatic Engraver, Pneumatic Tools, Special designed for pneumatic engraving machine,commonly used in the processing of jewelry and crafts. Such as grinding, drill, mill and other auxiliary applications to better assist them in their work..
  • ★【PRACTICAL】 Metal Engraver, Air Tools, Engraving cutting bits Jewelry tool for pneumatic impact engraving machine. User-friendly anti-slip rubber gasket design, considerate and practical..
  • ★【AFTER SALES SERVICE】 Engraving Machine For Jewelry, If you have any problem, please feel free to contact us, we will do our best to provide customers with 100% satisfaction solutions..
Check Stock