Top 3d Printer Air Pumps

MakerBot-MP05823 PLA Filament, 1.75 mm Diameter, Small Spool, Black

  • The best and most consistent PLA filament for your MakerBot Replicator 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

Flexible TPU 3D Printers Filament 1.75mm Color is Clear Accuracy +/- 0.05mm Net Weight 1KG(2.2LB) Transparent TPU Hardness 95A…

  • 【1.75MM TPU(flexible) FILAMENT】 The TPU(flexible) filaments are useful in a broad range of printing applications which have the advantage of Low-Odor and Low-Warp. Compared with traditional brittle TPU(flexible), TRONXY 3D printer filaments have adjusted the degradability of the material for optimal performance, so TRONXY TPU(flexible) filaments are not brittle during 3D printing jobs.
  • 【+/-0.02MM TOLERANCE】TRONXY TPU(flexible) 3D printer filaments are produced with more precise specification and have a tolerance of only +/- 0.02 mm. No matter which 3D printer you are using, the consistently round diameters provide optimum flow through the extruder nozzle. Almost all 1.75 mm-specification 3d printers in the market are configured to run with the TPU(flexible) 3D printing filaments.
  • 【VACUUMED SEALED PACKAGING】Some 3D printing materials can be negatively affected by moisture, so this is why TRONXY 3D printer filaments are all vacuumed sealed along with a desiccant pack. This will enable you to easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
  • 【100% ENVIRONMENTAL FRIENDLY】TRONXY 3D printer filaments comply with the Restriction of Hazardous Substance (....
Check Stock

MakerBot PLA Filament, 1.75 mm Diameter, Large Spool, Cool Gray, MP05784

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05779 PLA Filament, 1.75 mm Diameter, Large Spool, Red

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • to have no heavy metals, phthalates, or BPA.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

MakerBot-MP05783 PLA Filament, 1.75 mm Diameter, Large Spool, Warm Gray

  • The best and most consistent PLA filament for your MakerBot 3D Printer.
  • Comprehensively quality tested at both 100-micron and 200-micron layer resolutions.
  • Compatible with the MakerBot Replicator Desktop 3D Printer, MakerBot Replicator Z18 3D Printer, MakerBot Replicator Mini Compact 3D Printer, and MakerBot Replicator 2 Desktop 3D Printer.
Check Stock

15g 3D Printer Glue Sticks, Aitrip 2Pcs Solid Stickers for 3D Printer Hot Bed Print Filament PLA ABS PET PETG and Other More

  • ▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
  • ▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
  • ▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
  • ▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
  • ▌Long-lasting: PLA glue Lasts for 100+ average prints.
Check Stock

WINSINN 50mm 5015 Blower Fan 12V 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing 1000mm/39in Cable Brushless Cooling 50mmx15mm 2PIN Pack of 4Pcs

  • ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow....
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work,....
  • ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
  • ✔️Connector & Cable length: XH2.54 – 39in(1000mm), meet connection needs.
  • ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel....
Check Stock

WINSINN 50mm 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 4Pcs)

  • ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm.
  • ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, small squirrel cage, humidifier, aromatherapy and can be used as a replacement fan for any electronic products..
Check Stock

Creality Ender 3 Glass Bed Upgraded Build Surface Plate, 235x235x4mm

  • No Edge Curling - 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts..
  • No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing..
  • Excellent Flatness - Improved 3D printer glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model..
  • Super Convenient - Very easy to take off the model, no tools needed. This borosilicate glass bed could be fixed with middle sized clips and cleaned with alcohol or acetone at room temperature..
  • Compatibility - The 3D printer parts is applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed compatible with your printer..
Check Stock

Comgrow Creality Ender 6 3D Printer Stable Core XY Structure with 3 Times Faster Printing Speed Acrylic Enclosure Silent Board Glass Bed 9.8 x 9.8 x 15.7 inch

  • Faster Printing Speed and Higher Precision: Thanks to the Core-XY mechnical structure, the Ender-6 enclosed 3d printer can reach print speeds up to 150mm/s, which is 3 times faster than other Ender printers and many of its competitors. In terms of printing accuracy and printing speed, the newly-released Creality Ender-6 is the most powerful and capable FDM 3D printer in the Ender series..
  • Optional Semi-closed Build Chamber: An acrylic enclosure is an optional upgrade for the Ender 6 corexy 3d printer. With acrylic plates added on the four sides of the printer, this Creality 3d printer is better at preserving the temperature within the print area, which will extend filament choices from PLA to ABS, TPU, and more. Meanwhile, the transparent plates still allow real-time monitoring of 3D printing process from 360° around..
  • Ultra Silent Main Board: Creality Ender-6 core xy 3d printer is custom-built with an ultra-silent Germany-imported TMC motion controller, enabling the printing process won't make any noise and ensuring smooth movement under 50dB..
  • Elegant Appearance: The Ender-6 is revamped with a new look: an integrated all-metal chamber body, strong Creality-blue corner connectors and acrylic open door structure giving the FDM 3d printer a very elegant....
Check Stock

ANYCUBIC Mega X FDM 3D Printer and ANYCUBIC PLA 3D Printer Filament(Grey + Black) Bundle

  • ① ANYCUBIC MEGA X 3D Printer, Large Metal FDM 3D Printer with Patented Heatbed and 1kg PLA Filament, Build Size 11.81in(L) X 11.81in(W) X 12in(H).
  • ② ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Grey.
  • ③ ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Black.
Check Stock

WINSINN 5015 Blower Fan 12V, 3D Printer 24 Volt Fans Blower Turbine Turbo Dual Ball Bearing, Brushless Cooling 50mmx15mm 2PIN (Pack of 2Pcs)

  • ✔️WINSINN 5015 blower fan 24V which micro size and lightweight design, suitable for 3D printer hotend / nozzle or any DIY cooling and narrow place..
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.1A, Power: 2.4W,Speed: 5500PRM, Air Pressure: 16.28mmH₂O, Airflow: 3.23CFM, Noise: 40dBA.
  • ✔️Widely Used: Designed to provide high air volume for small areas which requires cooling or ventilation. Suitable for 3D printer, DVD player, small communication devices for heat radiation, PC CPU server, DVRs, switches, network storage devices and can be used as a replacement fan for any electronic products..
  • ✔️Packing List: 2 x 50mm Blower Fan 24v - Dual Ball Bearing, Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 50mm x 50mm x 15mm.
Check Stock